Rural Development Department Tender

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with Intelligent Compactor with compaction analyzer and V-Sat attachment. to the required density. Grading II (Using Screening Type B (11.2 mm) Aggregate) Spec No-MORTH-404

Providing and constructing 50 mm. thick Modified Penetration Macadam (MPM) road surface including all materials, preparing the existing road surface, spreading 40mm. stone layers metal 30% crusher broken metal + 70% Hand broken metal (By breaking Rubble obtained by blasting) , heating and spraying the bitumen of specified grade @ 1.75 kg / sqm, spreading 12mm.size chips compacting with Static roller having weight 8 to 10 MT. to achive the desired degree of compaction as per Technical Specification Clause 506 etc.complete, including applying tack coat of bitumen 0f specified grade at the rate of 0.30 Kg Sqm.(on existing bitumen surface.)

Open Graded Premix Surfacing- Providing and Laying OGC 20 mmthickness composed of 13.2 mm to 5.6 mm aggregates premixed withbituminous binder transported to site with VTS , laid over a previouslyprepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction but excluding prime / tackand Seal coat. For Bitumen of specified grade--USING drum mix typehot mix plant with SCADA, Paver and Vibratory roller ( Over MPMSurface) (VG-30 bulk bitumen rates are considered to arrive at rates MORTH 510

Providing bituminous Type A liquid seal coat on bituminous surfaceincluding supplying all materials and bitumen of specified gradepreparing existing road surface, heating and applying bitumen @ 0.98KgSqm. by mechanical means, spreading chips and rolling, by staticroller having weight 8 to 10 MT. etc. complete. (VG-30 bulk bitumenrates are considered to arrive at rates)

Supplying hard murum/ kankar at the road site, including conveying and stacking complete.

Spreading hard murum for side width etc. complete

Compacting the hard murum side widths including laying in layers on each side with vibratory roller including artificial watering etc. complete.

Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete.

Providing and laying Cast in situ/Ready Mixcement concrete in M20 of trap/ granite/quartzite/gneiss metal for steps including steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 0.90m x 0.60m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with aproved colour shade paint complete, on M.S.angle\of size 25 x 25 x 3 mm frame with properly cross braced M.S.\angles of size 25mmx25mmx3mm duly painted including Two M.S. angle iron posts of size 40 mm x 40 mm x 5 mm, 3.00 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 45 cm x 45 cm x 45 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge

Test of Metal - Water Absorption

Test of Metal - Sieve Analysis

Test of Hard Murum -Sieve Analysis ( One Test for 200 Cum )

Test of Penetration, Softening Point, Flash & Fire Point, Specific Gravity

Test of carpet mix Extraction Test

Royalty Charges for Other Materials

Royalty Charges for Sand

Item No.:-18)GST Charges