Rural Development Department Tender

Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road .. including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete Non-Dsr Item Additional Specifications : The work shall be carried out as per the instructions of Engineer in-charge.

Excavation for foundation / pipe trenches in.. hard rock and concrete road by chiselling, wedging, line drilling by mechanical means or by all means other than blasting including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the area and lifts as below, stacking as directed by Engineer-in-charge, normal dewatering, excluding backfilling, etc. complete..by..all..means...(Bd-A-6/259) Non-Dsr Item Additional Specifications : The work shall be carried out as per the instructions of Engineer in-charge.

Dewatering the excavated trenches and pools of water in the building trenches / pipeline trenches, well works by using pumps and other devices including disposing off water to safe distance as directed by Engineer-in-charge (including cost of machinery, labour, fuel), Non-Dsr Item Additional Specifications : The work shall be carried out as per the instructions of Engineer in-charge.

Providing dry trap/ granite/ quartzite/ gneiss, rubble stone soling in 15 cm to 20 cm thick layers including hand packing and compacting,..etc...complete...(Bd-A-12/264) Non-Dsr Item Additional Specifications : The work shall be carried out as per the instructions of Engineer in-charge.

Providing and laying in situ Cement Concrete M-15 of trap/ granite / quartzite / gneiss metal for foundation and bedding including bailing out water, form work, compaction, curing, etc. complete. Non-Dsr Item Additional Specifications : The work shall be carried out as per the instructions of Engineer in-charge.

Providing and laying in situ Cement Concrete of trap/ granite / quartzite / gneiss metal for RCC work in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering, form work, compaction, finishing and curing, etc. complete. (By weigh batching and mix design for M250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement) Non-Dsr Item Additional Specifications : The work shall be carried out as per the instructions of Engineer in-charge.

Providing and casting in situ C.C. of trap / granite/ quartzite / gneiss metal of approved quality for RCC works as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, centering, form work, compaction, finishing the formed surfaces with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface wherever necessary or roughening if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement) RCC M -30 Non-Dsr Item Additional Specifications : The work shall be carried out as per the instructions of Engineer in-charge.

Providing and fixing in position steel bar reinforcement of various diameters for RCC piles, caps, footings, foundations, slabs, beams, columns, canopies, staircases, newels, chajjas, lintels, pardies, copings, fins, arches, etc. as per detailed designs, drawings and schedules; including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required, etc. complete (including cost of binding wire). (Bd-F- 17/306) Non-Dsr Item Additional Specifications : The work shall be carried out as per the instructions of Engineer in-charge.

Providing internal cement plaster 20 milimetre thick in single coat in cement mortar 1:3 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing, excetra complete. (For Ground Floor) (using ARTIFICIAL SAND). Item / Page No : 8 / 209 Specification No : Bd.L.4 Spec. Page No : 368 Additional Specifications : If artificial / VSI crushed sand is used instead of natural sand; terms, conditions and specifications mentioned in Circular by Chief Engineer, Public Works Region, Pune bearing No CEP/D-2/Buildings-2/5940/2017 dated 17/10/2017 and Annexure-I attached to it and also Circular by Chief Engineer, Public Works Region, Nagpur bearing No 36 dated 15/01/2019 and Annexure-I attached to it will be appicable.

Providing and fixing in position steel fibre reinforced concrete (S.F.R.C.) frame and covers of approved make including loading, unloading, transportation, all taxes, etc. complete as directed by Engineer-in-charge..(20..tonnes..capacity). Non-Dsr ItemAdditional Specifications : The work shall be carried out as per the instructions of Engineer in-charge.

Providing and fixing welded mesh fabric for guniting of mesh size 75 milimetre X 75 milimetre and 10 gauge thick including scaffolding excetra complete. Item / Page No : 23 / 295 Additional Specifications : The work shall be carried out as directed by Engineer-In-Charge.

Providing and fixing M.S. sluice gates in position as per detailed drawings and specification including cost of all materials, labour, operating pedestal, connecting rod, painting with three coats of anti-corrosive paint, etc. complete as directed by Engineer-incharge.Non-Dsr Item Additional Specifications : The work shall be carried out as per the instructions of Engineer in-charge.

Providing and fixing in position, mild steel fabrication work using angles, square tubes, C-channels, excetra for various partition frame as per design and instructions and complete in all aspects including all materials, labour, finishing, excetra complete. Item / Page No : 16 / 354 Additional Specifications : The work shall be done as per instructions of Engineer in charge.

Providing, lowering, laying and placing in position, shrouding material for porous pipe gallery / slotted pipe gallery / trench gallery with all leads and lifts involved including transportation of materials to site of works, screening and washing of materials and placing in position with given section, etc. complete as directed..by..Engineer-in-charge. A) 40 mm metal Non-Dsr Item Additional Specifications : The work shall be carried out as per the instructions of Engineer in-charge.

B0 12 to 20 mm Metal Non-Dsr Item Additional Specifications : The work shall be carried out as per the instructions of Engineer in-charge.

6 to 12 mm Non-Dsr Item Additional Specifications : The work shall be carried out as per the instructions of Engineer in-charge.

River Sand Non-Dsr Item Additional Specifications : The work shall be carried out as per the instructions of Engineer in-charge.

Providing and fixing Road junction / Information sign board of size 0.90 metre X 0.60 metre prepared on 16 gauge mild steel sheet with angle iron frame of size 35 milimetre X 35 milimetre X 5 milimetre including painting with one coat of zinc cromate stoving primer and two coats each of green/ white back ground and back side gray stove enamelled, bonded with red retro-reflective sheet Engineering grade, border / letters / numeral / arrows, coated with non pealable crystal clear protective coat retaining 100 percent reflection including two angle iron post of size 50 milimetre X 50 milimetre X 5 milimetre of 3.65 metre long inflated at bottom drilled on top and painted in white and black bands of 30 centimetre. with 4 numbers high strength galvanised iron bolts and nuts of size 10 milimetre diameter and 20 milimetre long sheet and angle iron post in one piece without joints including all taxes, conveying, fixing in ground with cement concrete 1:4:8 block of 60 centimetre X 60 centimetre X 75 centimetre size as directed by Engineer-in-charge, excetra complete. Mild Steel Board with Engineering Grade. Item / Page No : 47 / 64 Specification No : 8196.9MoRTH-801 Spec. Page No : --- Additional Specifications : The work shall be carried out as per instructions of Engineer in charge.

Providing Adhesive for ANAEROBIC BAFFLED REACTOR as per Quotation Non-Dsr Item Additional Specifications : The work shall be carried out as per the instructions of Engineer in-charge.

Providing Sludge Removal Tanaker ( 3000 Lit Capacity) as per Quoation for Next 5 Years after completing project Non-Dsr Item Additional Specifications : The work shall be carried out as per the instructions of Engineer in-charge.

Providing Plantation for Road Zone as per Direction of Engineer in Charge etc complete Non-Dsr Item Additional Specifications : The work shall be carried out as per the instructions of Engineer in-charge.

Providing Plastic Tarpaulin Sheet for Protecting for Root zone as per Quotation Non-Dsr Item Additional Specifications : The work shall be carried out as per the instructions of Engineer in-charge.

Structural Engineer Charges 12 % of RCC And Steel work Amount Non-Dsr Item Additional Specifications : The work shall be carried out as per the instructions of Engineer in-charge.

Add 18 % for GST Non-Dsr Item Additional Specifications : The work shall be carried out as per the instructions of Engineer in-charge.

Add 0.50 % for Insurance Non-Dsr Item Additional Specifications : The work shall be carried out as per the instructions of Engineer in-charge.

Add for Surveying, Desiging & Estimate Preparation Charges 5 % Non-Dsr Item Additional Specifications : The work shall be carried out as per the instructions of Engineer in-charge.