Rural Development Department Tender

Providing and constructing 50 mm. thick Modified Penetration Macadam (MPM) road surface including all materials, preparing the existing road surface, spreading 40mm. stone layers metal 30% crusher broken metal + 70% Hand broken metal (By breaking Rubble obtained by blasting) , heating and spraying the bitumen of specified grade @ 1.75Kilogram/ Square Metre, spreading 12mm.size chips compacting with Static roller having weight 8 to 10 MT. to achive the desired degree of compaction as per Technical Specification Clause 506 etc.complete, including applying tack coat of bitumen 0f specified grade at the rate of 0.30KilogramSquare Metre.(on existing bitumen surface.) Rate as per (E CSR Item No.3.38 a

Providing and applying tack coat on the prepared surface heating by fames in Boiler and spraying bitumen set footed in bitumen boller on B.T. surface 2.5 kg/10 sqm.VG­30 bulk bitumen (E CSR Item No.3.3) (Reference No.MORTH 503)

Open Graded Premix Surfacing- Providing and Laying OGC 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates premixed with bituminous binder transported to site with VTS , laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction but excluding prime / tack and Seal coat. For Bitumen of specified grade--USING drum mix type hot mix plant with SCADA, Paver and Vibratory roller ( Over MPM Surface) (VG-30 bulk bitumen rates are considered to arrive at rates) (E CSR Item No.4.12) (Reference No.MORTH 511

Providing and laying of Type - B premix seal coat with HMP of approprate crushed stone chipping 6.70 mm size and penetration bitumen of specified grade @ 0.68 Kg / Sqm. , preparing existing road surface including mixing in suitable Batch Mix plant and rolling by static roller having weight 8 to 10 MT. etc. complete. (VG-30 bulk bitumen rates are considered to arrive at rates) (E CSR Item No.4.03) (Reference No.MORTH 513

Supplying hard murum/ kankar at the road site, including conveying and stacking complete. (E CSR Item No.2.29) (Reference No.MORTH 408) (Additional Specification..MORTH 408 )

Spreading hard murum for side width etc. complete (E CSR Item No.2.3) (Reference No.MORTH 408) (Additional Specification..MORTH 408 )

Compacting the hard murum side widths including laying in layers on each side with power roller including artificial watering etc. complete. (E CSR Item No.2.31) (Reference No.MORTH 408) (Additional Specification..MORTH 408 )

Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge (E CSR Item No.6.36) (Reference No.MORTH 801) (Additional Specification..MORTH 801

Royalty of Murum

Testing Charges for MPM 40 mm H.B.Metal Water Absorption,Specific Gravity,Inpact Value / Crushing Value

Sieve Analysis 40 mm H.B Metal

Flakiness Index and Elongation Index-Tests 40 mm HB

Flakiness Index and Elongation Index-Tests 40 mm C.B metal

Sieve Analysis- Tests for 40 mm Crusher Broken

Add for Material Testing Charges for Bitumen Penetration , Softening Point, Flash and Fire Point , Specific Gravity - Tests

Add for Material Testing Charges for OGC 20 mm thick Sieve Analysis for 10 to 12 mm metal CR

Add for Material Testing Charges for Mix Metal- Extaction - Tests

Add for Material Testing Charges for Hard Murum Sieve Analysis- Tests