Rural Development Department Tender

Providing and laying of Type - B premix seal coat with HMP ofapproprate crushed stone chipping 6.70 mm size and penetrationbitumen of specified grade @ 0.68 Kg / Sqm. , preparing existing roadsurface including mixing in suitable Batch Mix plant and rolling bystatic roller having weight 8 to 10 MT. etc. complete. (VG-30 bulk).

Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular of steel sheet painted with one coat of Zinc chromate stoving 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel shape painted with one coat of zinc chromate - stoving primer and two coats green back ground white border/messages, symbols etc. and back side in grey stove enamel paint including M.S. angle frame of 35 mm x 35 mm x 3 mm and two M.S.angle iron post of size 50 mm x 50 mm x 5 mm, 3.65 m long properly cross braced with angle iron of size 50 mm x 50 mm x 5 mm duly painted with alternate black and white bands of 25 cm width including G.I.fixtures etc. and fixing the board in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including transportation etc. complete. Spec. No. : As per IRC-67, 1977 & M.O.R.T & H Circular No. RW/NH-33023/31/88 D.O.III Dated 2-5-1994

Providing rubble filling of trap/ granite/ quartzite gneiss stones for foundations including hand packing filling gravel / sand in the voids etc. complete.

Providing and applying tack coat on the prepared surface heating by fames in Boiler and spraying bitumen set footed in bitumen boiler on B.T. surface 2.5 kg/10 sqm.VG-30 bulk bitumen.MORTH 503

Open Graded Premix Surfacing- Providing and Laying OGC 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates premixed with bituminous binder transported to site with VTS , laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction but excluding prime / tack and Seal coat. For Bitumen of specified grade--USING drum mix type hot mix plant with SCADA, Paver and Vibratory roller ( Over MPM Surface) (VG-30 bulk bitumen rates are considered to arrive at rates)

Providing and laying cement concrete pipe of IS 458:2003 NP-2 class of 900mm diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete.

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with Intelligent Compactor with compaction analyzer and V-Sat attachment. to the required density. Grading I (Using Screening Type B (11.2 mm) Aggregate) MORTH 404(Compacted thickness of each layer shall be 75 mm)

Supplying hard murum/ kankar at the road site, including conveying and stacking complete. Morth 408

Providing and laying in situ / ready mix cement concrete of M-10 proportion with trap/ granite/ quartzite/ gneiss metal in foundation including necessary form work, compacting and curing etc. complete. (with reversible drum type mixer with out SCADA with fine agreegates of required specifications (Natural sand / VSI sand finely washed etc )

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with Intelligent Compactor with compaction analyzer and V-Sat attachment. to the required density. Grading II (Using Screening Type B (11.2 mm) Aggregate) MORTH 404(Compacted thickness of each layer shall be 75 mm)

Spreading hard murum for side width etc. complete MORTH 408

Watering & compacting of embankment formed of materials obtained from the road cutting within a lead of 50 m, not less than 97 % of standard Proctor density after laying them in layers of 20 cm. to 30 cm. with power roller.

Excavation for foundation in earth, soils of all types, sand,gravel and soft murum, including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5m to 3.0m) By Mechanical Means

Item No. 1 : Clearing grass and removal of rubbish up to a distance of 50 metres outside the periphery of the area .Spec. no- MORTH 223

Clearing grass and removal of rubbish up to a distance of 50 metres outside the periphery of the area .

Excavation for catch / side water gutter in all sorts of soils to the specified section including stacking the excavated stuff in a regular bund and disposing of unsuitable or excess stuff as directed all sorts of soils.

Providing and laying in situ / ready mix M-20 cement concrete of trap /granite /quartzite /gneiss metal for approach slab / Rigid pavement including compacting, finishing, curing etc. complete. (excluding reinforcement) (with reversible drum type mixer/ concrete batch mix plant (pan mixer) with SCADA with fine agreegates of required specifications (Natural sand / VSI sand finely washed etc ), cement 6.40 bags/cumt)CD.15 Page.No. 168 and B.7. Page No. 38

Providing and constructing 50 mm. thick Modified Penetration Macadam (MPM) road surface including all mataerials, preparing the existing road surface, spreading 40mm. stone metal layers 100% crusher broken metal with conical crusher plant heating and spraying the bitumen of specified grade @ 1.75 kg/sqm, spreading 12mm.size chips compacting with static roller having weight 8 to 10 MT. to achive the desired degree of compaction as per Technical Specification Clause 506 etc. complete. Including picking of existing WBM surface.(VG-30 bulk bitumen rates are considered to arrive at rates)

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means

Item No. 1 : Clearing grass and removal of rubbish up to a distance of 50 metres outside the periphery of the area .Spec. no- MORTH 224

Providing cast in situ / ready mix M20 grade cement concrete for head walls of CD work / retaining walls etc. including necessary form work, compaction, finishing and curing etc. complete. (with reversible drum type mixer/ concrete batch mix plant (pan mixer) with out SCADA