Rural Development Department Tender

Providing and laying in situ cement concrete of grade M-15 of trap / granite / gneiss / quartzite / graded metal for PCC with or without surface reinforcement/ RCC concreting requiring heavy or special type of shuttering for works of gallery, sluice, spillway crest, spillway downstream face, energy dissipating structures, intake structures, training walls, piers, abutments etc. with Concrete Mixer with shuttering and scaffolding, placing, compacting, curing with an initial lead of 1 km and all lifts etc. complete as directed. (A) M-15 (20 MSA) (Cement 5.64 bags/Cum)

Providing and laying in situ cement concrete of grade M-20 of trap / granite / gneiss / quartzite / graded metal for RCC works of gallery, sluice, spillway crest, spillway downstream face, energy dissipating structures, intake structures, training walls, piers, abutments, slab etc. with Concrete Mixer including shuttering and scaffolding, placing, compacting, curing with an initial lead of 1 km and all lifts etc. complete as directed. (A) M-20 (20 MSA) (Cement 6.60 bags/Cum)

Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. Including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete as directed.

Providing and laying cement plaster 6 mm thick in C.M. 1:3 single coat without neru finish to concrete surface in all position including centering, scaffolding, curing etc. complete as directed. (Cement 0.057 bags/Sqm)

Back filling up to ground level behind the canal structures etc. complete with suitable material of approved quality in layers not exceeding 20 cm without disturbing the structure etc. complete as directed.

Providing Earth Work to Flank with all leads & lifts etc.complate as direct.

Providing structural steel (ISWB 150 x 100 mm) in rolled section like joints, angles etc. as per detailed design and drawing including fixing in position with hold fasts, including oil paint with two coat including one coat anticorrosive paint etc complete. (for sill beam 150 x 100 x 6 mm)

Providing and fixing structural steel for M.S. Gate including Cutting, bending, hooking, laying in position and tying M.S./ HYSD / TMT bars with binding wire for reinforcement of R.C.C. work as per detailed drawing etc.complete with all lead and lifts as directed.

Providing 'X' Ray quality M.S. Welding in all positions with required number of runs, for M.S. pipes internally and / or externally including gauging wherever necessary, fixing appurtenances and other accessories in connection with pipe laying work as per specification, using electrodes having weldmark E7018 (Low hydrogen electrodes), including surface preparation (i.e. Removal of scale, cleaning, etc.) including all materials, labour, equipments, etc. complete. (Welding 6mm tk.)

Providing and applying Primer Red Oxide Paint in two coats including surface preparation, chipping the welding, cleaning spatters, dust etc. Complete as directed.

Providing and fixing Rubber seal (size 60 x 20 mm) for M.S. Gate including cutting, laying in position, tying with nut and bolts work as per detailed design and drawing etc. including binding wire with all lead and lift as directed etc. complete

Providing and constructing 230 mm thick dry rubble stone pitching using stones and stone chips from approved source from borrow area including cost of all materials, labour, hand packing / wedging stone chips, finishing etc., complete with lead up to 50 m and all lifts.

Providing and fixing canal information board of 1.2 x 0.75 m prepared on 16 gauge M.S. sheet with angle iron frame of size 35 x 35 x 3 mm with cross bracing of size 25 x 25 x 3 mm including painting with one coat of zinc chromate storing primer and two coats each of green/white back ground and back side grey store enameled bonded with red retro reflective sheet Engineering grade, border / letters / numeral / arrows coated with non peal able crystal clear protective transparent coat retaining 100% reflection including two angle iron post of size 50x50x5 mm of 3.65 m long inflated at bottom drilled on top and painted in white and black bonds of 30 cm with four numbers high strength of G.I. bolts and nuts of size 10 mm dia. and 20 mm long sheet and angle iron post in one piece without joints including all taxes, conveying, fixing in ground with cement concrete in M-15 block of size 60 x 60 x 75 cm as directed by Engineer-in-Charge.

Part A Total

Part B __ 1 % Insurance

GST Charges

Royalty Charges

part B Total