Rural Development Department Tender

Item No4 :- Providing laterite stone masonry in cement mortar 1:6 in foundation and plinth including striking joints on the unexposed faces and watering complete. R.A.No.2

Item No.5 :- Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering, formwork ,cover blocks, laying/pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) R.A.No.3

Item No.6 :- Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks compacting and roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) R.A.No.4

Item No. 7 - Filling in plinth & floors with contractors murum 15 cm to 20 cm layers including watering & compaction complete.

A) With Excavated Material SSR Item No 740/ 21.36

B) With Private Material SSR Item No 740/ 21.37

Item No. 8 -Providing soling using 80mm size metal in layer of 15cm each including filling voids with sand, ramming, watering etc. complete. SSR Item No 741/ 21.38

Item no.9 - Providing and fixing frame with / without ventilator of size as specified with Country non teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete. SSR Item No1186/ 39.02

Item No.10 :- Providing laterite stone masonry in C.M. 1:6 in superstructure including racking out joints where plastering is to be done watering and scaffolding complete. R.A.6

Item No. 11 :- Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) R.A.No.5

Item No.12 :- Providing and laying Cast in situ/Ready Mixcement concrete M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) R.A.No.7

Item No. 13 :- Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, compaction, finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) R.A.No 9

Item No.15 - Providing internal cement plaster 12 mm thick in a Single coat inin cement mortar 1:4 with neeru finish to stone masonry surface in all positions including scaffolding etc complete. R.A.No 11

Item No.16 - Providing internal cement plaster 20mm. thick in two coats in cement mortar 1:3 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete. R.A.No 12

Item No.17- Providing and fixing Country cut teak wood single leaf panelled door shutter without fanlight and 25mm thick as per drawing consisting of T.W. top rail size 100mm x 25mm and bottom lock rail 200mm x 25mm insert pannel 12 mm thick commercial ply faced T.W. particle board with phenol formaldehyde synthetic resin (Generally confirming to ISI 3097) excluding frame, including stainless steel fixture and fastening and T.W. beading to junctions of panelled inserts and as instructed by the Engineer in charge including 3 coats of oil painting etc. complete. SSR Item No1189/ 39.05

Item No 18 -Providing and fixing in position (as per 1868 / 1982) Aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 kg/Rmt. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 kg/Rmt.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. and handle and top section 40 x 18 x 1.25 mm at weight o.417 kg/Rmt. As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With powder coating without box SSR Item No,I228/39.44

Item No.19- Providing and fixing mild steel grill work for windows, ventilators etc. 20 kg/sqm as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete.SSR Item No1279/ 40.02

Item No. 20 :- Providing & Laying Vitrified Mirror / Glossy Finish Tiles Decorative Type having Size 590 mm. to 605 mm. x 590 mm. to 605 mm. of 8 to 10 mm. Thickness & Confirming to I. S. 15622 - 2006 (Group Bla) of Approved Make, Shade & Pattern for Flooring in Required Position Laid on a Bed of 1:4 Cement Mortar including Neat Cement Float, Filling Joints, Curing & Clearing etc. complete.R.A

Item No. 21 :- Providing & Laying Vitrified Mirror / Glossy Finish Tiles having Size 590 mm. to 605 mm. x 590 mm. to 605 mm. of 8 to 10 mm. Thickness & Confirming to I. S. 15622 - 2006 (Group Bla) of Approved Make, Shade & Pattern for Dado & Skirting in Required Position Fixed in 1:4 Cement Mortar including Neat Cement Float, Filling Joints, Curing & Clearing etc. complete.R.A

Item No.22 - Providing and Fixing ceramic tiles of approved make &required size for skiring and dado in required position laid on a bed of cement mortar 1:4 including cement float, filling joint with white/colour cement slurry cleaning, curing complete.SSR Item No1004/ 33.25

Item No.23:- Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete SSR Item No861/ 26.33

Item No.24 - Providing sills of polished Kadappa stone 25mm to 30mm thick, on a bed of 1:4 cement mortar including cement float, filling joints with slurry, curing polishing and cleaning etc. complete.SSR Item No999/ 33.20

Item No 25 - Providing and applying plastic emulsion paint of approved colour shade and quality to old /new surface in two coat including scaffolding preparing etc ccomplete. a) Primer P/I 281/35.21 30.00/Sqm + b) Emuishion Paint P/I 285/36.12-- 66.5/Sqm = 96.50/ Sqm

Item No 26 :- Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to old plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days complete( Including primer coat.). a) Primer P/I 281/35.21 30.00/Sqm + a) Primer P/I 281/35.13- 72.00 / Sqm = 102.00/Sqm

Item No. 27:- Providing & Fixing Orissa Type Colour Glazed Earthenware 625 x 450 mm. Water Closet Pan including Trap, C. I. Soil & Vent Pipe upto Outside Face of the Wall including 100 mm. Dia. C. I. Plug, Bend, 15 mm. Thick 10 Liter P. V. C. Flushing Cistern with All Necessary Pipe Connection etc. complete.SSR Sr. No. 1406, P/I 277/42.35

Item No.28:- Providing name board on plastered surface including lettering and painting etc complete.

Item No 29 ) Electrification Charges

Item No.30 :- Payment of Test Results If Contractor produced Authorised Results.

Lat Stone

Con. Cube