Rural Development Department Tender

Providing and laying in situ /Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal forR.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Stee centering formwork, laying / pumping cover blocks, compaction and curing rough ening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc.complete ,with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer /concrete Batch mix plant (Panmixer)etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing Laterite stone masonry in cement mortar 1:6 in foundation and plinth including racking out joints when plastering is to be done/striking joints when no plastering is to be done watering and scaffolding.

Providing and laying Cast in situ / Ready Mix cement concrete M-20 of trap / granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc.complete. (Excluding reinforcement and structural steel). with fully automatic micro process or based PLC with SCADA enabled reversible Drum Type mixer / concrete Batchmix plant (Panmixer) etc. complete.With fine aggregate (Crushed sand VSI Grade)

Filling in plinth and floors with approved excavated material in 15cm. to 20cm. Layers including watering and compacting etc. complete.

Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete.

Providing Laterite stone masonry in cement mortar 1:6 in Super structure including racking out joints when plastering is to be done/striking joints when no plastering is to be done watering and scaffolding.

Providing and laying Cast in situ /Ready Mix cement concrete M-20 of trap/ granite/ quartzite/gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork ,cover blocks, laying / pumping, compacting and roughening the surface if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel ).with fully automatic micro processor based PLC with SCADA enabled reversible DrumType mixer/ concrete Batch mix plant (Panmixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite /quartzite/gneissmetalforR.C.C. slabsand landings as perdetailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smoot hand even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCAD Aenable dreversible DrumType mixer/ concrete Batchmix plant (Panmixer) etc. complete.With fine aggregate (Crushed sand VSI Grade)

Providing and fixing in position TMT-FE -500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings andschedules. including cutting,bending,hooking the bars,binding with wires or tack welding and supporting as required complete

Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete

Providing and fixing Country cut teak wood double or single leaf secondclass fully panelled door shutte with 35 mm thick style and rail with 2 5mm thick panels with openable fanlight as per detailed drawings.Excluding the door frame 60 mm x 100 mm stainless steel fixtures and fastening and finishing thewoodworkwith oil painting 3 coats. (Excluding the door frame)

Providing sills of required material 20mm to 25mm thick, on a bed of cement mortar 1:4 including cement float, filling joints with neat cement slurry, curing, polishing, moulding edges, cleaning complete. a) Marble other than white makrana

Providing and fixing in position. (asperI.S.1868/1982) aluminium sliding window of two tracks with rectangular pipe having over all dimension?63.50 x 38.10 x 1.02 mm at weight 0.547 Kilogram / One Running Metre. and window frame bottom track section 61.85 x 31.75 x1.20 mm at weight 0.695 Kilogram / One Running Metre. Top and side track section 61.85 x 31.75 x1.30 mm at weight 0.659 Kilogram / One Running Metre. The shutter should be of bearing bottom40 x 18 x 1.25mm at weight 0.417 Kilogram / One Running Metre. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram / One Running Metre.And handle section 40 x 18 x 1.25 mm at weight 0.417 Kilogram / On eRunning Metre. and top section 40 x 18 x 1.25 mm at weight 0.417 Kilogram / Running metre. As per detailed drawings and as directed by Engineer in chargewith all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mmt hick plain glass with all required screws and nuts etc, complete.With powder coating without box

Providing and fixing mild steel grill work for windows, ventilators,etc.15 Kilogram / One Square Metre as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete.

Providing internal cement plaster 12mmthick in single coat in cement mortar 1:4 with out neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using water proofing compound at 1 Kilogram per cemen tbag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.

Providing and applying plastic emulsion paint of approved quality, colour and shade to new surface in three coats including scaffolding, preparing the surface. (excluding primer coat) etc. complete.

Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to the plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete.

Providing and laying machine cut machine Polished Kota stone flooring 25mm to 30mm thick and required width in plain/ diamond pattern on bed of 1:6 C. M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete.

Providing and fixing 90 cm x 60 cm Marble plate engraving 10 cm. height letter, figures including painting the lefters/figures with approved colour and shade complete

Test Reports -Cement, crushed metel aggragates, Sand

Royalty

RCC design charges