Rural Development Department Tender

Supplying hard murum/ kankar at the road site, including conveying and stacking complete. (SSR 2020-21 Item No.2.29a) Km-2

Km-3

Supplying soft murum at the road site, including conveying and stacking complete. (SSR 2020-21 Item No.2.29b) Km-2

Km-3

Spreading 80/40 mm metal for road work including sectionong etc complete as directed by Engineer in charge . (SSR 2020-21 Item No.50.58) As directed by Engineer-in-charge

Spreading hard murum/ soft murrum/ gravel or kankar for side width complete (SSR 2020-21 Item No.2.30)

Compacting the sub grade / gravel / size metal (100 mm loose) layers for all widths with Power roller having weight 8 to 10 MT. including necessary, labour, materials and artificial watering complete. (SSR 2020-21 Item No.50.61) As directed by Engineer-in-charge

Providing and constructing 50 mm. thick Modified Penetration Macadam (MPM) road surface including all mataerials, preparing the existing road surface, spreading 40mm. stone metal layers 30% crusher broken metal + 70% Hand broken (by breaking rubble obtained by blasting) heating and spraying the bitumen of specified grade @ 1.75 kg/sqm, spreading 12mm.size chips compacting with static roller having weight 8 to 10 MT. to achive the desired degree of compaction as per Technical Specification Clause 506 etc. complete. Including picking of existing WBM surface.(VG-30 bulk bitumen rates are considered to arrive at rates) (SSR 2020-21 Item No.3.37a) IRC-SP-20, 2002 Clause No. 8.7.3 Km-2

Km-3

Providing and constructing 75 mm. thick Modified Penetraction Macadam (MPM) road surface including all materials, preparing the existing road surface, spreading 40 mm. stone layers metal 30% crusher broken metal + 70% Hand broken metal (By breaking Rubble obtained by blasting) , heating and spraying the bitumen of specified grade @ 2 kg / sqm , spreading 12mm.size chips compacting with three wheel static roller having weight 8 to 10 MT. to achive the desired degree of compaction as per Technical Specification Clause 506 etc.complete, including applying tack coat of specified grade of bitumen at the rate of 0.30 Kg Sqm. on existing bitumen surface. (VG- 30 bulk bitumen rates are considered to arrive at rates) (SSR 2020-21 Item No.3.36a) MORTH 505 IRC-SP-20, 2002 Clause No. 8.7.3 Km-2

Km-3

Open Graded Premix Surfacing- Providing and Laying OGC 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates premixed with bituminous binder transported to site with VTS , laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction but excluding prime / tack and Seal coat. For Bitumen of specified grade--USING drum mix type hot mix plant with SCADA, Paver and Vibratory roller ( Over MPM Surface) (VG-30 bulk bitumen rates are considered to arrive at rates) (SSR 2020-21 Item No.4.12) MORTH 511 Km-2

Km-3

9 MM SEAL COAT: Providing and laying of Type A 9mm premix seal coat with HMP of apropriate capacity crushed stone chiping 6.7 mm size and penetration bitumen of specified grade @ 1.2kg/Sq.m, preparing existing road surface by mechanical means, spreading chips and rolling, by static roller having weight 8 to 10 MT. etc. complete.(VG-30 bulk bitumen rates are considered to arrive at rates) (SSR 2020-21 Item No.4.13) MORTH 513 Km-2

Km-3

Excavation for catch / side water gutter in all sorts of soils to the specified section including stacking the excavated stuff in a regular bund and disposing of unsuitable or excess stuff as directed all sorts of soils. (SSR 2020-21 Item No.2.18) MORTH 309

Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge (SSR 2020-21 Item No.6.36) MORTH 801

Aggregate 80 mm Metal, + 40 mm Metal + MPM HB 40 metal + Cr. Metal Water Absorption

Impact Value

Sieve Analysis

Flakiness Index

Hard & Soft Murum Liquid limit & plastic limit

Bitumen Penitration

Ductility

Softening Point

Viscosity

Bitumen Extraction / Binder Test (For OGC) and Premix Seal 20 mm Carpete Premix Seal Coat Seal Coat

Royalty Charges