Rural Development Department Tender

Item No. 3 :- Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed. [MORTH 301] (S.S.R. I.No. 2.11 P.No. 85 )

Item No. 4 :- Supplying trap/granite/quartzite/gneiss stone metal of required size by bringing the boulders / Rubble at the road side breaking them to required gradation including conveying the boulders/Rubble & stacking the broken metal etc. complete (Prior approval of sample stack of broken metal by the Ex. Engineer is necessary the date of approval will form part of the measurements) a)80 mm Metal, By breaking Boulders (Hand broken) [As directed by Engineer incharge] (S.S.R.I.No. 50.56)

Item No. 5 :- Supplying trap/granite/quartzite/gneiss stone metal of required size by bringing the boulders/Rubble at the road side breaking them to required gradation including conveying the boulders/Rubble & stacking the broken metal etc complete (Prior approval of sample stack of broken metal by the Ex. Engineer is necessary the date of approval will form part of the measurements) a)40 mm Metal By breaking Boulders (Hand broken) [As directed by Engineer incharge] (S.S.R.I.No. 50.57)

Item No. 6 :- Supplying soft murum at the road site, including conveying and stacking complete. (S.S.R.I.No. 2.29b)

Item No. 7 :- Supplying hard murum/ kankar at the road site, including conveying and stacking complete. [MORTH 408] (S.S.R.I.No. 2.29)

Item No. 8 :- Spreading 80/40 mm metal for road work including sectionong etc complete as directed by Engineer in charge . [As directed by Engineer-in-charge] (S.S.R.I.No. 50.58)

Item No. 9 :- Spreading gravel / sand / soft murum /avilable murum over rubble soling /W.B.M.surface blanketing berms etc.complete. [Spec.No. :Rd.28 Page No. 205] (S.S.R.I.No. 2.30)

Item No. 10 :- Compacting the hard murum side widths including laying in layers on each side with vibratory roller including artificial watering etc. complete. [MORTH 408] (S.S.R.I.No. 2.31)

Item No. 11 :- Compacting the sub grade/gravel/oversize metal (200 mm loose) layers for all width with Power roller having weight 8 to 10 MT. including necessary, labour, materials and artificial watering complete. [As directed by Engineer-in-charge] (S.S.R.I.No. 50.59)

Item No. 12 :- Compacting the sub grade/gravel/size metal (100 mm loose) layers for all widths with Power roller having weight 8 to 10 MT including necessary labour materials & artificial watering complete [As directed by Engineer-in-charge] (S.S.R.I.No. 50.61)

Item No. 13 :- Providing and laying in situ / ready mix / ready mix M10 cement concrete of trap/ granite/ quartzite/ gneiss metal in foundation including necessary centering, formwork, bailing out water, compacting and curing etc. complete. (with fully automatic micro processor based PLC with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan mixer) with natural /artifical sand) [BR.5 P.No. 105 & B.7, P.No. 38] (S.S.R.I.No. 12.25)

Item No. 14 :- Providing and laying in situ / ready mix M-20 cement concrete of trap /granite /quartzite /gneiss metal for approach slab / Rigid pavement including compacting, finishing, curing etc. complete. (excluding reinforcement) (with reversible drum type mixer/ concrete batch mix plant (pan mixer) with SCADA with fine agreegates of required specifications (Natural sand / VSI sand finely washed etc ), cement 6.40 bags/cumt) [CD.15 P.No. 168 & B.7. P.No. 38] (S.S.R. I.No. 11.25)

Item No. 15 :- Cutting transverse contraction joints 3 to 4 mm wide and depth 60mm. .in concrete slab using concrete cutting machine with diamond studded saw within 48 hours of casting of bay / slab etc. complete including subsequent widening of the groove 8 to 10 mm. wide at top having depth of 15 mm. as directed by Engineer incharge. [Spec.No. RD] (S.S.R.I.No. 5.17)

Item No. 16 :- Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means [Bd.A.1 P.No. 259] (S.S.R. I.No. 21.02 P.No. 148)

Item No. 17 :- Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. [As directed by Engineer incharge.] (S.S.R. I.No. 21.4)

Item No. 18 :- Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/granite/quartzite/gneiss metal for steps including steel centering formwork laying/pumping, compacting roughening them if special finish is to be provided finishing uneven & honeycombed surface & curing etc complete The C.M.1:3 plaster is considered for rendering uneven & honey combed surface only Newly laid concrete shall be covered by gunny bag, plastic tarpaulin etc (Wooden centering will not be allowed.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum type mixer/concrete batch mix plant (pan mixer) etc complete with fine aggregate (natural sand/crushed sand VSI grade finely washed etc) [Bd.E.2 P.3No. 288 & B.7 P.No 38] (S.S.R.I.No. 24.04)

Item No. 19 :- Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs & drawings including steel centering, formwork, cover blocks, laying/pumping compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc complete (Excluding reinforcement & structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc complete With fine aggregate (Natural Sand/Crushed sand VSI Grade finely washed etc) [Bd.F.8 P.No. 302 & B.7, P.No.38] (S.S.R.I.No. 25.7)

Item No. 20 :- Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. [Bd.F.17 P.No 306] (S.S.R.I.No. 26.33)

Item No 21 :- Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. As directed by Engineer in Charge (S.S.R.I.No. 6.36 )