Rural Development Department Tender

Supplying, erecting & marking SPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB DSR I.no. 5.3.2. [LED STREET LIGHT with OCTAGONAL POLE]

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 2 core 6 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL. DSR I.No. 7.1.5. [LED STREET LIGHT with OCTAGONAL POLE]

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. DSR I.no. 7.6.9. [LED STREET LIGHT with OCTAGONAL POLE]

Providing & erecting 7 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 155mm A/F, top 70 mm A/F on provided foundation as per specification no. OH-PL/OPL. DSR I.No. 8.2.13. [LED STREET LIGHT with OCTAGONAL POLE]

Providing and erecting galvanised 1000mm single arm sword type bracket with FRP dome and ball as per specification no. OH-PL/PBKT. DSR I.No. 8.2.21 [LED STREET LIGHT with OCTAGONAL POLE]

Providing pipe type earthing with 40mm. dia. G.I. pipe or 20 mm dia. G.I. Road complete with all materials testing and recording the results as per specification no. EA-EP. DSR I.No. 9.1.4. [LED STREET LIGHT with OCTAGONAL POLE]

Supplying and erecting iron, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority. DSR I.no. 6.1.19 [LED STREET LIGHT with OCTAGONAL POLE]

Supplying and erecting metal work in CRCA sheet with fabrication of boxes, panel boards, etc. including cutting, bending, drilling, welding, riveting, treated with anti-rust treatment and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paint complete. DSR I.no. 6.1.1. [LED STREET LIGHT with OCTAGONAL POLE]

Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 9m to 10m high octagonal /conical GI pole). DSR I.No. 16.3.9 [LED STREET LIGHT with OCTAGONAL POLE]

Supplying and erecting Street light bracket for erection of side entry fitting on pole with 40 mm. dia. ‘B’ grade G.I. pipe of required length complete as per specification no. FG-BKT/SLB. DSR I.No. 2.7.9 [SOLAR STREET LIGHT]

Supplying and erecting metal work in CRCA sheet with fabrication of boxes, panel boards, etc. including cutting, bending, drilling, welding, riveting, treated with anti-rust treatment and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paint complete. DSR I.No. 6.1.1. [SOLAR STREET LIGHT]

Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority. For two board 1) CRCA size - 0.5 x 0.5 m = 1.0 /12.55 kg/mtr = 12.55kg., 2) Angle size - 50 x 50 x 6m = 12 tr/4.5 kg = 54 kg - 66.55kg . DSR I.No. 6.1.19 [SOLAR STREET LIGHT]

Supplying and erecting self-locking arrangement with keys in duplicate, made of brass duly erected, flush with surface of panel / cupboard.DSR I.No. 6.1.20 [SOLAR STREET LIGHT]

Supplying and erecting ISI mark G.I. pipe pole ‘B’ grade 80 mm dia 6 m long with pole cap, base plate in provided foundation as per specification no. OH-PL/GIP. DSR I.No. 8.1.16 [SOLAR STREET LIGHT]

Providing pipe type earthing with 40mm. dia. G.l. pipe or 20 mm dia. G.l. Rod complete with all materials as per specification no. EAEP. DSR I.No. 9.1.4 [SOLAR STREET LIGHT]

Making cement concrete foundation including excavation ( 45 x 45 x 120 ) cm deep in 1:3:6 cement concrete, 20 to 25 mm stone metal, (45 x 45 x 45) cm / 45 cm dia. x 45 cm height plinth duly plastered, with necessary curing and finishing complete. (for 6 m pole). DSR I.no. 16.3.2. [SOLAR STREET LIGHT]

Supplying , installing, testing and commissioning of solar panel comprising high efficiency polycrystalline / multi - crystalline photovoltaic cell 125 WP, necessary clamps and module frame on existing structure complete with following specifications maximum power 125 W, Operating temperture range : 40 to 85 degrees celsius, Short Circuit Current (ISC) : 7.5A, Module voltage : 12V, open circuit voltage (Voc): 22.22 V, Operating nominal voltage : 12V, OPerating maximum voltage : 17.59V, maximum series fuse rating (A) : 15.0A, Number of cells : 72 (18x4), Dimension : 1490 x 675 x 35(mm), Weight (kg) ; 13.0kg, (with warranty 5 years) (Rate is sanctioned byS.E. Electrical P.W. Circle, Nanded Vide MR. Lr. no. 2102 dated 24-11-2-2023 address to E.E.Z.P. (Works) Division, Chhatrapati Sambhajinagar) [NON CSR ITEM] [SOLAR STREET LIGHT]

Supplying and erecting DC LED Street light fitting of 12V 30W, including first 6 hr full intensity light output and following 6 hr with half intensity light output, with lumen 3750 colour temp 5500L-6500K, colour redening index 70, PWM chrge controller efficiency 90% , LED driver efficiency 90% , Duty cycle first six hours 100% rest 50% light, LED external optics 145 x 90 degree street light lens, class IP 66, charge controller methodology - three stage battery charge monitoring algorithm, maximum charging current 10Amps, short circuit portection, battery over charge protections, battery deep discharge protection, solar panel dusk to dawn operation NTTV-4V, DTTV-6V, battery low load disconnect voltage 13 V, battery fill load disconnect voltage 11.2V, battery constant voltage set point 14.7V, LED indicaton - green off: battery not charging PV low, green on: battery charging, green flashing : battery full , redoff: battery not discharge, Redon: Battery discharge, load disconnect, overall dimension 55 mm x 90 mm x 60 mm , overall weight 1kg, and above housing of pressure die cast aluminium alloy abnd heat sink extruded aluminium complete (with warantee 5 yrs) (RAte is sanctioned by S.E.Electrical P.W. Circle, Nanded Vide Mr. Lr. No.2102 dtd 24-11-2023 address to E.E.Z.P. (works) Division, Chhatrapati Sambhajinagar) [NON CSR ITEM] [SOLAR STREET LIGHT]

Supplying, installing, testing and commissioning of lifepo4 battery with capacity of 12.8V-78Ah with 4S 15A BMS,with Max Pulse Discharge Rate 80 A, Charging current 15A, Life 3000 cycle suitable to charge lithium cell with necessary wiring connections, with IP 65 alluminium cabinet with stand and nut bolts complete Storedcasing material - alliminium, Terminal -M4 connector, charge temprange 0-45C, discharge temperture range 20-55C, storage temp -20-45C battery size 198 x168 x 170 mm, weight 12 Kg. (Normal voltage - 12.8V, nominal capacity - 78 Ah, Charging Current : 50A, Instantaneous discharge current : 200A, continuous discharge current : 100A, Life : 3000 cycles ormore, charging temp : 0.45 @C, discharge temp 20-65 @C, storage temp : 20-65@C, operting voltage range : 10.0V -14.6V, Overload protection voltage: 14.6V (with warranty 5 years). (Rate is sanctioned byS.E. Electrical P.W. Circle, Nanded Vide MR. Lr. no. 2102 dated 24-11-2-2023 address to E.E.Z.P. (Works) Division, Chhatrapati Sambhajinagar) [NON CSR ITEM] [SOLAR STREET LIGHT]