Rural Development Department Tender

Supplying trap/granite/quartzite/gneiss stone metal of required size by bringing the boulders / Rubble at the road side breaking them to required gradation including conveying the boulders /Rubble and stacking the broken metal etc. complete . (Prior approval of sample stack of broken metal by the Ex. Engineer is necessary the date of approval will form part of the measurements) a)80 mm Metal, By breaking Boulders (Hand broken). (Item No.50.56)

Supplying trap/granite/quartzite/gneiss stone metal of required size by bringing the boulders / Rubble at the road side breaking them to required gradation including conveying the boulders /Rubble and stacking the broken metal etc. complete . (Prior approval of sample stack of broken metal by the Ex. Engineer is necessary the date of approval will form part of the measurements) a)40 mm Metal, By breaking Boulders (Hand broken). (Item No.50.57)

Supplying hard murum/ kankar at the road site, including conveying and stacking complete. (Item No.2.29a)

Supplying soft murum at the road side, including conveying and stacking complete. (Item No.2.29b)

Spreading 80/40 mm metal for road work including sectionong etc complete as directed by Engineer in charge .(Item No.50.58)

Spreading hard murum/ soft murrum/ gravel or kankar for side width complete (Item No.2.30)

Compacting the hard murum side widths including laying in layers on each side with vibratory roller including artificial watering etc. complete.(Item No.2.31)

Compacting the sub grade / gravel / size metal (200 mm loose) layers for all widths with Power roller having weight 8 to 10 MT. including necessary, labour, materials and artificial watering complete. (Item No.50.59)

Compacting the sub grade / gravel / size metal (100 mm loose) layers for all widths with Power roller having weight 8 to 10 MT. including necessary, labour, materials and artificial watering complete. (Item No.50.61)

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 3.00 m.) By Manual Means (Item No.21.01)

Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. ITEM NO. 21.40

Providing and laying in situ / ready mix cement concrete of M-10 proportion with trap/ granite/ quartzite/ gneiss metal in foundation including necessary form work, compacting and curing etc. complete. (with reversible drum type mixer with SCADA with fine agreegates of required specifications (Natural sand / VSI sand finely washed etc ) (Item No.11.02)

Providing cast in situ / ready mix M10 grade cement concrete for head walls of CD work / retaining walls etc. including necessary form work, compaction, finishing and curing etc. complete. (with reversible drum type mixer/ concrete batch mix plant (pan mixer) with SCADA with fine agreegates of required specifications (Natural sand / VSI sand finely washed etc ), cement 4.05 bags/cumt) (Item No.11.28)

Providing and laying cement concrete pipe of IS 458:2003 NP-3 class of 1000mm diameter in proper line, level and slope etc. complete.(Item No.11.17)

Providing and constructing 50 mm. thick Modified Penetration Macadam (MPM) road surface including all materials, preparing the existing road surface, spreading 40mm. stone layers metal 30% crusher broken metal + 70% Hand broken metal (By breaking Rubble obtained by blasting) , heating and spraying the bitumen of specified grade @ 1.75 kg / sqm, spreading 12mm.size chips compacting with Static roller having weight to 10 MT. to achive the desired degree of compaction as per Technical Specification Clause 506 etc.complete, including applying tack coat of bitumen 0f specified grade at the rate of 0.30 Kg Sqm.(on existing bitumen surface.) (Item No.3.38a)

Providing and Providing and applying tack coat on the prepared surface heating by fames in Boiler and spraying bitumen set footed in bitumen bolleron B.T. surface 2.5 kg/10sqm. (VG-30 bulk bitumen rates are considered to arrive at rates) (Item No.3.30)

Providing and Laying OGC 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates premixed with bituminous binder transported to site with VTS, laid over a previously prepared surface, finishedt ot he required grade, level, alignment, and rolling to achieve the desired compaction but excluding prime/tack and Seal coat. For Bitumen of specified grade--USING drum mix type hot mix plant with SCADA, Paver and Vibratory roller (Over MPM Surface)(VG-30 bulk bitumen rates are considered to arrive at rates) (Item No.4.12)

Providing and laying of Type - B premix seal coat with HMP of approprate crushed stone chipping 6.70 mm size and penetration bitumen of specified grade @ 0.68 Kg/Sqm., preparing existing road surface including mixing in suitable Batch Mix plant and rolling by static roller having weight 8 to 10 MT. etc. complete. (VG-30 bulk bitumen rates are considered to arrive at rates) (Item No.4.03)

Providing and fixing Road junction / Information sign board of size 0.90 m x 0.60 m. prepared on 16 gauge M.S. sheet with angle iron frame of size 35x35x5 mm including painting with one coat of zinc cromate stoving primer and two coats each of green/ white back ground and back side gray stove enamelled, bonded with red retro reflective sheet Engineering grade, border / letters / numeral / arrows, coated with non pealable crystal clear protective coat retaining 100% reflection including two angle iron post of size 50x50x5 mm of 3.65 m. long inflated at bottom drilled on top and painted in white and black bands of 30 cm. with 4 Nos. high strength G.I. bolts and nuts of size 10 mm dia. and 20 mm long sheet and angle iron post in one piece without joints including all taxes, conveying, fixing in ground with cement concrete 1:4:8 block of 60 cm x 60 cm x 75 cm size as directed by Engineer-in-charge etc. complete. Mild Steel Board with Engineering Grade. (Item No.6.47)

Total Royalty Charges For Sand

Total Royalty Charges For Metal & Murum

Test For 80 mm Metal (Water Absorption, Specific Gravity,Impact Value, Crushing Value)

Test For 80 mm Metal (Sieve Analysis.)

Test For 40 mm Metal (Water Absorption, Specific Gravity,Impact Value, Crushing Value)

Test For 40 mm Metal (Sieve Analysis.)

Test For Soft Murum (Liquid limit & plastic Limit.)

Test For Hard Murum (Sieve Analysis.)

Test For Bulk Bitumen (Penetration, Softening Point, Flash & Fire Point, Specific Gravity)

Test For Hot Mix Material (Extraction Test)

Test For Hot Mix Material (Extraction Test)