Rural Development Department Tender

4) Providing and laying Cast in situ/Ready Mix cement concrete M- 20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork,cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand Item No. 185/25.31 Bd.F.5 Page No. 300 and B.7, Page.No. 38 7514/-

5) Providing laterite stone masnory in cement mortar 1:6 in foundation & plinth including racking out joints where plastering is to be done watering & scaffolding complete.Item No. 6 4436/-

6) Filling in plinth and floors with approved excavated material in 15cm. to 20cm. layers including watering and compacting etc. complete. P/ 155/21.36 65/- bda 10 p 206

7) Providing soling using 80 mm size trap metal in 15 cm. Layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. Item No. 21.4 699/-

8) Providing laterite stone masnory in cement mortar 1:6 in superstructure including racking out joints where plastering is to be done watering & scaffolding complete Item No. 7 4916/-

9) Providing and fixing HDEP or equivalent door frames mad out of rigid PVC hollow section DWUF 405 of size 48mm x 40mm with steel reinforcement ST 22 of size 2 x 18mm mitre cut and welded and tie rod at the bottom including fixing 100mm long expandable screw in required number with wooden plugs fixed in walls as holdfasts and remaking damaged surface etc. complete (for toilet blocks) P/I 90/5 3186/-

10)Providing and Fixing 30 MM thick BOTH SIDE PRELAMINATED SOLID PANEL PVC DOOR SHUTTER consisting of frame made out of M.S tubes of 19 guage thickness and, size 19 x 19 mm for styles and 15 x15 mm for the top and bottom rails, M.S frame shall have a coat of metel primer of approved make and manufacture. M.S frame shall be covered with heat mouled PVC 'C' channel made from 5 mm (+/0.25) thick prelaminated sheet of density 600 kg/cbm ,of size 30mm thickness 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45? angle on either side forming stiles ; and 5 mm thick ,95 mm wide PVC sheet out of which 75 mm shall be falt and 20 mm shall be tapered in 45 on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be falt and 20 mm shall be tapered on both sides to form lock rail.Top,bottom and lock rail shall be provided either side of the panel. An additional 5 mm (+/0.25) thick PVC strip of 20 mm width is to be stuck on the bottom side of the ' c ' channel prelaminated paneling of 5 mm (+/0.25) thick PVC sheet to be fitted inside the M.S. frame welded/ sealed to the styles and rails with 5 mm (+/0.25) x 30 mm PVC sheet beading on either side and joined together with solvent cement adhesive etc ,10 mm thickness (5 mm (+/0.25) x 2 nos ) 20 mm wide cross PVC sheet as gap insert for the rail and bottom rail. Door to be fixed to frames with 3 nos M.S.powder coated but Item No. 271/39.47 4094/-

11) Providing and fixing frame with / without ventilator of size as specified with Country non teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete. P/I 261/39.02 64692/

12) Providing and fixing solid core flush door shutter commerciale in single leaf 32 mm thick without ventilator commercial type of exterior grade as per detailed drawings with rough iron hole fast stainless steel fixtures and fastening and handles on both sides, and finishing with oil painting 3 coats complete tem No. 39.10 1665/- BD-T-36 Page No. 500

13) Providing sills of polished Kadappa stone 25mm to 30mm thick, on a bed of 1:4 cement mortar including cement float, filling joints with slurry, curing polishing and cleaning etc. complete.P/I 231/33.20 744/- bdm 29 p 397

14) Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete. Item No. 276/ 39.68 2688/-

15)Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension ?63.50 x 38.10 x 1.02 mm at weight 0.547 kg/Rmt. and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 kg/Rmt. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. And handle section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. and top section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc complete. With powder coating without box Item No. 39.40 Rs.4017/-

16) Providing and fixing Country cut teak wood double or single leaf second class fully panelled door shutter with 35mm thick style and rail with 25 mm thick panels with openable fan light as per detailed drawings. Excluding the door frame 60mm x 100mm stainless steel fixtures and fastening and finishing the wood work with oil painting 3 coats. (Excluding the door frame) Item No. 39.04 5468/- BD-T-7 and 8 Page No. 481-82

17) Providing and fixing mild steel grill work for windows, ventilators etc. 20 kg/sqm as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete Bd.U.1 Page No. 537 Item No.40.01 1171/-

18) Providing and laying Cast in situ/Ready Mix cement concrete M- 20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natura sand/V.S.I. quality Artificial Sand Item No. 25.50 6741/- Bd.F.6 Page No. 300 and B.7, Page No.38

19) Providing and laying Cast in situ/Ready Mix cement concrete M- 20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including centering, formwork, cover blocks compacting , curing , finishing and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I.quality Artificial Sand Item No. 26.05 8829/- Bd.F.9 Page No. 303 and B.7, Page No.38

20)Providing and laying Cast in situ/Ready Mix cement concrete M- 20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including centering, formwork, cover blocks, laying/pumping, compactionfinishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand Item No. 25.70 8516/- Bd.F.8 Page No. 302 and B.7 Page No.38

21) Finishing the terrace slab integrally mixed with water proofing compound in C.M. 1:3 proporation with 20mm tk. Layer including curring finishing using approved water proofing comoiound at rate of 1 kg per 50 kg of cement etc. complete P/I 38/4 113/-

22) Providing internal cement plaster 12mm thick in single coat in cement mortar 1:3 without neeru finish to concrete or brick surfaces, in all position including scaffolding and curing etc. complete. Item No. 32.05 185/- Bd.L.2 Page No. 368

23) Providing internal cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all position including scaffolding and curing etc. complete. Item No. 32.03 174/- Bd.L.2 Page No. 368 +Providing neeru finish to plastered surfaces in all positions including scaffolding and curing etc. complete. Item No.225/ 32.15 Bd. L.10, Page No.370 35/- Item No. 32.03 174/- Bd.L.2 Page No. 368

24Providing and laying ceramic tiles of having size 30 cm x 30 cm confirming to I.S.15622/2006 (group D II-A) and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry leaning curing etc. complete. P/I 33.24 920/- Bd.M.12 Page No. 385.

25) Providing and laying machine cut machine Polished Kota stone flooring 25mm to 30mm thick and required width in plain/ diamond pattern on bed of 1:6 C. M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete. Item No. 233 33.06 877/-

26) Providing and laying ceramic tiles of having size 30 cm. x 30 cm. and confirming to orresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. Item No. 33.25 927/- Bd.M.13 Page No. 386

27) Providing and laying Polish kota stone of IS std and approved quality 30x30cm size for dado and skirting in required position with ready made adhesive mortar of approved quality in required position after making the wall portion in level in plaster of cement mortar 1:4 including joint filling with white/ colour slurry cleaning curing complete P/I 48/8b BDM 13/P. 386 1200/-

28) Providing and laying coloured glazed tiles of 148.5 milimetre X 148.5 milimetre in size and 5 to 6 milimetre thick for flooring in required positions and laid on a bed of cement mortar 1:4 including neat cement float, filling joints with white cement slurry, curing and cleaning complete. (Including all specials required like round edge titles, corner cups, etc.) P/I 49/12a BDM 12/P. 385 750/-

29)Providing and fixing coloured glazed tiles of 148.5 milimetre X 148.5 milimetre in size and 5 to 6 milimetre thick for dado and skirting in required positions on plaster of cement mortar 1:4 including neat cement float, including filling joints with white cement slurry, curing and cleaning complete. (Including all specials required like round edge titles, corner cups, etc.) P/I 50/14a 807/- BDM 13/P 386

30)Providing and fixing orissa type white glazed earthenware 575 mm. w.c. pan including S trap, with earethenware footrest C.I. soil and vent pipe upto the out side face of wall including 1:2:4 brick bat lime concrete bedding without flushing tap and its accessories etc. complete. Item No. 296/ 42.30 2570/-

31)Providing and layinbg 100mm dia. Salt glazed stoneware pipe including fitting such as tees, single junction, double junction laying jointing (including excavation and refilling the trenches) complete Item No. 293/42.03 196/- BDV 39 P 573

32)Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and airtight C. I. cover of 75 kg with lid and frame fixed in cement concrete. Item No. 294/- 42.10 Bd.V.43, Page No. 574 7005/-

33) Providing Soak Pit of size 120x120x120cm inclduing excavating and filling with brick bats charcoal asper drawing etc. Item No.295/ 42.19 627 1537/-

34) Providing and fixing 10 cm dia. P.V.C Nahani trap fixed with grating, etc. complete. Item No. 301/ 42.67 329/-

35) Providing & fixing 100mm dia. Stabilized / PVC/ , soil/ Vent/ Waste pipe & with necessary fixtures and fitting such as bends tees, single junction sloted vent clamp etc. Complete Item No. 299/42.52 BDV 485/-

36) Providing and fixing coloured glazed earthenware Wash Hand Basin of 45 cm x 30 cm size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connection including P.V.C. waste pipe and trap up to the outside face of the wall. making good the damaged surface , testing etc. complete Item No. 292/ 41.67 Bd.V.30 Page No. 565 3057/-

37) Providing and fixing reinforced cement concrete cover of approved quality and make of 311 (7.5cm) thick over manhole and inspection chamber including mild steel reinforcement curing testing etc. complete a) 1.15 x 0.60 m. in size P/I 152/51a 529/-

38) Providing and fixing Kadappa stone slab for kitchen platform of approved type and design 40mm thick in .M.1:4 including providing and fixing border patti on front edge filling jointing curring cleaning etc. complete P/I 55/29 a 845/-

39) Providing and fixing C.T.W. 25mm tk. Double leaves 2nd class windows (fully glazed) adopting sections and sizes as given in standard specifications Vol II (1981) with plain obsered glass shutters without ventilators/ fanlioghts asper detailed drawings incluidng iron oxidised fixtures and fastenings and finsihing the wood work with one coat of primer compolete ( Without frame and mild steel bars) P/I 109/40A b BDT 42/P. 503

40) Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to the plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete. Item No. 35.13 Bd.0.8 Page No. 406 50/- + Providing and applying primer coat for internal wall surface and celling including scaffoldin to receive oil bound distemper treatment etc. complete. Item No. 36.01 19/-

41) Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) etc. complete. Item No. 36.11 Bd.P.5 Page No. 413 32/- + Providing and applying primer coat for internal wall surface and celling including scaffoldin to receive oil bound distemper treatment etc. complete. Item No. 36.01 19/-

42) Providing and applying two coats of lead/zinc base oil paint/ bituminous paint of approved colour and shade to new wood work and fiber boards including preparing the surface, knotting, scaffolding if necessary, excluding primer coat etc. complete. Itewm No. 35.01 60/- Bd.O. 1 Page No. 403

43a )Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. P / I :- 199/26.33 46309/- BDF 17 P 306

44) Providing and fixing stainless steel sink of size 600 x 510 x 200mm incluidng coupling, outlet pipe, elbow and other necessary fitting, finishing etc. complete. Item No. 302/42.78 11250/-

45) Providing and fixing mild steel grill gate with angle iron frame 65mm x 65mmx 10mm with iron bars of 150mm C/C and diagonal flafts as per the detailed drawing including hinges pivot block locking arrangement welding revelting and of pointing of three coats of approved weight of fate 35 kg/smt Item No. 313/44.1 1432/

46)Providing and fixing board displaying information such as Name of work Tender cost Name of contractor work complition and liablity period etc having rectangular shape of 1.20 m x 0.90 m size made out 18 gauge (1.25 mm) thick mild steel sheet painted with one coat of zinc chromate stoving primer and two coats of enamal paint on front side and grey stove enamal on back side and border / messages / symbols etc. with approved colour shade paint complete. On M.S. angle of size 35 x35 x3 mm frame with properly cross braced M.S. angles of size 35 x35 x3 mm frame with properly cross braced M.S. angle of size 35 mm x 35mm x 3 mm duly painted including two M.S. angle iron posts of size 65 mm x 65 mm x 6mm 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including excavation refilling transportation and labour etc complete. P/I 79/6.96 2610/-

Roylty Metal

Testing Charges