Rural Development Department Tender

Item No.4: Providing and supplying in standard lengths Polyethelene Pipes specials…etc complete. 5 % of item no. 3 amount

Item No.5: Lowering and supplying in standard lengths Polyethelene Pipes, confirming to IS 4984 / 14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i. e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint, including all local & central taxes etc.complete

25 mm.CPVC Pipe

15 mm.CPVC Pipe

Item No.7:-Providing and fixing screw down 15mm dia bib/stop tap of brass including necessory socket union nut complete

Item No.8:- Providing, double flanged short body pattern type manually operated Butterfly Valve having body, disc and end cover in graded cast iron to IS 210 Gr. CF.200 generally conforming in BS 5155, Synthetic rubber faced ring secured on disc by retaining ring with stainless steel screw stub shaft of stainless steel riding 65 mm dia S.V

50 mm dia S.V

Item No.9: Lowering, laying and joining in position following C.I.D/F angle Reflux valves, Butterfly valves and Sluice valves including cost of all labour, jointing material including nut bolts and giving satisfactory hydraulic testing, etc. complete. (For all class of valves.)65 mm dia S.V

50 mm dia S.V

Item No.10:- Supplying and erecting 25 mm dia. gun metal sluice valve at position with necessary materials complete 50 mm dia gun metal gate valve

25 mm dia gun metal gate valve

Item No 11 :-Providing and fixing 50 mm Ball Valve with complete with PN16 pressure rating, as per specification no. FF-VL/BV 25 mm Type PN-1

Item No.12: Providing and constructing Brick Masonry in valve chambers with 15 cm thick 1:3:6 proportion PCC bedding excluding excavation B.B.masonry in CM 1:5 proportion. Precast RCC frame & cover etc complete as directed by Engineer-in-charge. 60 x 45 x 90

Item No. 13: Providing and laying in situ 1:2:4 (M-150) grade of C.C of trap / granite / quartzite / gneiss metal for foundation and bedding including dewatering . form work, compacting and curing, finishing, etc. complete with initial life of 1.5 M below / above ground level.

Item No.14:- Refilling the trenches from excavated stuff with soft material in 15 cm layers with all leads & lifts including consolidation surcharging … etc complete.

Item No.15:- Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of low density polythyler and built corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity above 1000 to 20,000 litres 1000x 3Nos = 3000 Ltrs RCC SUMP (25000Ltr)

Designing (aesthetically), and constructing RCC ground service reservoirs / RCC sumps in M-300 mix. of required capacity including excavation in all types of strata, foundation concrete, container walls, bottom slab top RCC roof slab / or dome, 20 mm thick cement plaster with water proofing compound in CM 1:3 proportion. to inside face of the container,including epoxy paint from inside including refilling and disposing of surplus stuff within lead of 50 M, all labour and material charges, for laying and jointing of pipe assembly for inlet, outlet washout, over flow and bye-pass arrangement consisting of C.I./ M.S. D/F. pipes, specials and valves of given diameters, providing and fixing accessories such as M.S. ladder outside, Stainless Steel Ladder in container, C.I. Manhole frame and cover, water top slab, B.B. masonry chamber for all valves, For SUMP of Capacity in lit 25000 Ltr

Item No.2 :-Providing ISI mark G.I.pipes of following Class. & Dia including all statutory dutie and taxes such as GST levied by GoI and GoM in all repect, inspection charges transportation to stores, etc. complete as per IS 1239/2004 50 mm dia. medium class 8.02 kg/m

Item No 3 :- Providing & Fixing ISI mark CI double flanged short body pattern type manually sluice valve of following dia including all taxes, all transportation charges, inspection charges loading unloading stacking… etc complete. 50 mm dia. Sluice valve PN-1

Item No 4 :- Providing and supplying ISI standered CI / S & S flanges secials including all taxes etc. Complete . 80 mm to 300 mm dia.

Item No.5 Supplying and erecting 1 Phase 230 v,50Hz, submersible pumpset suitable for erection on open well pump having discharge 35/270 L.P.M.head 30/15 m to 25 m head & (max efficiency at 41 m head & 50 Ipm & delivery pipe of necessary diameter erected with necessary H. type clamps as per specification etc complete.

Item No.6 Supplying & erecting automatic control panel for 1 Ph , 230 volt, A.c. Submersible/centrifugal pump set upto 1.5 HP consisting of DOL starter Of suitable relay range S.P.P. Combined ammeter/ voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof encloser with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase inbalence etc completed.

Item No.7 Supplying and erecting flat flexible 3 cores PVC sheathed submursible cable with, Copper Conductor , PVC insulated and PVC Sheathed etc completed

Item No. 8 Supplying and erecting (NRV)Non return valve 40 mm dia in position made of gun metal etc completed. Online Water Filteration Unit

a) CapacityinMld and Flow rate per hour 5Cum/ Hr.(0.12MLD)