Rural Development Department Tender

Item No 4 : Supplying trap /granite /quartzite /gneiss stone metal of required size by bringing the boulders / Rubble at the road side breaking them to required gradation including conveying the boulders /Rubble and stacking the broken metal etc. complete . (Prior approval of sample stack of broken metal by the Ex. Engineer is necessary the date of approval will form part of the measurements) a)40 mm Metal, By breaking Boulders (Hand broken). Additional Specification - As directed by Engineer-in-charge SSR 2020-21 Item no 50.57

Item No 5 :Supplying soft murum at the road site, including conveying and stacking complete.Additional Spec.No. Morth 408 SSR 2020-21 Item no 02.29 b

Item No 6 : Spreading 80/40 mm metal for road work including section on get ccomplete as directed by Engineer in charge . Additional Spec.No. As directed by Engineer-in-charge SSR 2020-21 Item no 50.58

Item No 7 : Spreading hard murum /soft murrum /gravel or kankar for side width complete. Additional Spec.No. Morth 408 SSR 2020-21 Item no 2.30

Item No 8: Compacting the sub grade / gravel / size metal (100 mm loose) layers for all widths with Power roller having weight 8 to 10 MT. including necessary, labour, materials and artificial watering complete. Additional Spec.No. As directed by Engineer-in-charge SSR 2020-21 Item no 50.61

Item No 9 : Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/granite/quartzite/gneiss metal for foundation and bedding including bailing out water,Steel centering,formwork, laying/pumping, compacting,rough ening the mifspecial finish is to be provided, finishing if required and curing complete,with fullyautomatic micro processor based PLC with SCADA enabled rever sible Drum Type mixer/ concrete Batch mix plant (Panmixer ) etc. complete .With fine aggregate (NaturalSand/Crushed sand VSI Grade finely washed etc ) Additional Spec.bd .E.1 Page No 287 SSR 2020-21 Item No 24.01

Item No 10 : Providing and laying Cast in situ /Ready Mix cement concrete in M20 of trap/granite/quartzite/gneiss metal for wearing course 8 cm thik including compacting ,finishing,curing and filing in joints with bitumen etc. complete. (with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant / panmixer with fine agreegates of required specifications (Natural sand/ VSI sand finely washed etc ) Chapter ;Bridge Super Structure Add Spec MORTH 801 SSR 2020-21 Item No 14.39

Item No 11 : Providing cast in situ/ ready mix M10 grade cement concrete for head walls of CD work / retaining walls etc.including necessary form work, compaction, finishing and curing etc.complete.(with reversible drum type mixer/ concrete batch mix plant (pan mixer) with SCADA With fine aggregate (NaturalSand/Crushed sand VSI Grade finely washed etc )cment 4.05 bage/cumt) Chapter ;Cross Drainage Works Add Spec CD 8 Page 163 SSR 2020-21 Item No 11.28

Item No 12 : Providing and laying concrete pipes of I.S.NP. class of 300 mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete. Add Spec Bd.V.41, Page Number 573 SSR 2020-21 Item No 42.09

Item No 13 : Cutting transverse contraction joints 3 to 4 mm wide and depth 60mm. .in concrete slab using concrete cutting machine with diamond studded saw within 48 hours of casting of bay / slab etc. complete including subsequent widening of the groove 8 to 10 mm. wide at top having depth of 15 mm. as directed by Engineer incharge. Chapter ;Rigid Pavement Add Spec MORTH 602.6.3 SSR 2020-21 Item No 5.17

Item No 14 : Providing to contraction joints polysuphide sealent (Pouring grade) confirming to BS : 5212 - 1989 into sawed groove widened at top for sealent reservoir of specified size and shape as per detailed drawing including fixing Polyethylene foam backer rod of required diameter (appraox. 25% larger than the initial 3 mm.to 4 mm. joint) overlaid with bond breaking tape as per detailed drawing. Item includes cleaning the joints with water jet / air compressor and allowing joint to become thoroughly dry before sealent is applied and applying primer.(A) Contraction and longitudinal joints (15 mm. deep x 8 mm.wide) Chapter ;Rigid Pavement Add Spec MORTH 602.6.3 SSR 2020-21 Item No 5.18

Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. Number As directed by Engineer in Charge

Item No 16 - Charges for testing of material in vigilance and quality control laboratory for Concrete Compressive Strength Of C C Cube (Set of 3 Cubes

Royalty Charges For Other Minerals