Rural Development Department Tender

Removing W.C. pans including disconnecting the sanitary and water supply connections, removing and breaking flooring and bed con-crete around pan removing the same carefully and stacking the serviceable materials as adn where directed including throwing the unserviceable materiasls out side etc. carefully and throwing out the refusal outside etc. complete.SSR ITEM NO 46.41 BDW 207

Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete.SSR ITEM NO 21.37 BDA 11

Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, pumping,compacting, roughening them if special finish is to be provided,finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc.complete. With natural sand/V.S.I. quality Artificial Sand SSR ITEM NO 24.01 BDE 1

Providing second class Burnt Brick masonry with conventional/ I.S.type bricks in cement mortar 1:6 in super structure a masonry including bailing out water anually, striking joints, raking out joints and watering etc Complete.SSR ITEM NO 27.05 BDG 5

Providing and fabricating structural steel work in tubular/rectangular/hollow steel structure of standard size as per detailed designs and drawing including fixing in position without connecting plates, braces etc. and one coat of anticorrosive paint and over it two coats of oil paintings of approved quality and shade complete. Tube pipe 96*48*3.2 mmabout 6.48kg per mt pipe for Truss SSR Item No. : 23.04 BD.C.8 Page No. 214

Providing and fixing plain zinc sheeting of 0.80 mm thick (22 B.W.G.) over the ridge hip or valley to galvanized iron sheet roofing including all fastening and bolt galvanised iron screws and bolts, lead and bitumen washers etc. complete.(Weight of 6.8 Kilogram/sq.m.).e SSR Item NO.38.05 BDR 5 Page NO.291

Providing and fixing colour coated Zincalume ( R ) AZ150 ( min 150 gms/sq.mt. total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyester paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm center- to-center. The end rib shall be designed for anti-capillary groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 Kilogram/ One Square Metre) As directed by Engineer in charge. SSR Item No.38.34 BDR Page No.296

Providing and fixing frame work of galvanised iron for suspended false ceiling which includes galvanised iron perimeter channels of size 27mm and 0.5mthick having one flange of 20mm and another of 30mm along with perimeter of the ceiling,fixing in brick wall/partition with the help ofrawal plug sand screws,suspending galvenised iron intermediate channels of size 45 mm and 0.9 mm thick with two flanges of15mm each from the so ffitat1200 mm centers with steegalvanised iron hanger of width 25mmx 0.5mm fasteners,ceiling section of 0.5mm thickness having curved wedge of 51.5mm and two flanges of 26mm each with lips of 10.5mm fixed to the intermediate channel with he help of connecting clip sand indirection perpendicular to the intermediate channel at 450 mm centers,12.5mm dry walls screw sat 230 mm centers; fixing screws mechanically either with screw driver or drilling machine with suitable attachment etc. complete.SSR Item No.38.15

Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc.complete.SSR Item No.32.04 BDL 2A

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.SSR Item No.32.11 BDL 7

Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and mooth ofapproved make, etc complete.SSR Item No.32.34 BDL

Providing and laying vitrified mirror / glossy finish tiles decorative type having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete.

Providing and fixing factory made solid core flush door shutters in double leaves 35mm thick,decorative type of exterior grade, as per detailed drawings, conforming toI.S.:2202–1966(Revised)includingapprovedfaceveneersonbothsides,withoutglazingandvenetiansincludingmatfinishstainlesssteelfixturesandfastening,stoppersandfinishingwithfrenchpolishingetc.(Excludingdoorframe)(SampletobegotapprovedfromEx.Engineerbeforeuse) Commercial Hard Wood shutter SSR ITEM NO 51.61 BDR

Providing and applying plastic emulsion paint of approved quality, colour and shade to old and new surfaces in two coats includingscaffolding, preparing the surface. excluding the primer coat)etc.complete.SSR ITEM NO 36.12 BDP 6

Providing and applying two coats of lead/zinc base oil paint/ bituminious paint of approved colour to new structural steel work and iron work in buildings including scaffolding if necessary, cleaning and preparing the surface etc. complete. (excluding primer coat).SSR ITEM NO 35.04 BDO 3

Providing and fixing mild steel grill work for windows, ventilators etc. 20 kg/sqm as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete.SSR ITEM NO 40.01 BDU 1

Providing and fixing in position. (as per I.S.1868 / 1982) Aluminiumsliding window of two tracks with rectangular pipe having overall dimension 63.50 x 38.10 x 1.02 mm at weight 0.547 kg/Rmt. and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 kg/Rmt. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. And handle section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. and top section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. With colour Anodising with box. SSR ITEM NO 39.37 BDT

Providing and fixing Anglo Indian type white glazed earthenwarewater closet pan with trap with UPVC seat and lid with chromiumplated brass hinges and rubber buffers ncluding PVC and vent pipeup to the outside face of wall with flushing cistern and necessaryfittings including cutting and making good to the walls and floorstesting etc. complete.( prior approval of sample an brand by Ex.Engineer is necessary before use)SSR ITEM NO 43.23 BDV 20

Providing and fixing on walls/ ceiling/ floor 25 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.SSR ITEM NO 42.57 BDV 5

Providing and fixing on walls/ ceiling/ floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc.complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. SSR ITEM NO 42.55 BDV

Providing and laying ceramic tiles of having size 30 cm. x 30 cm. and confirming to orresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete.SSR ITEM NO 33.25 BDM 13

Providing and fixing 15 mm diameter PVC Aqua kraft type of approved make super bib tap with flange including all accessories etc complete SSR ITEM NO 43.33 BD-V

Providing and fixing mild steel grill gate as per the detailed drawing including hinges, locking arrangements and painting in three coats of oil paint of approved colour and shade etc. complete.(weight 18 Kilogram. to 20 Kilogram. Per Sq.m.) Spec.One Number: As directed by Engineer- in-charge.

Providing and laying chequered tiles of approved quality of size 30 cmx 30 cm, confirming to corresponding I.S. for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete. SSR ITEM NO 33.66 BDM

Providing and fixing H.D.P container one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such a sinlet,outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 liters SSR ITEM NO 42.53 BDV

Supplying and erecting PVC trunking (PVC casing-n-capping) of size 20 mm with accessories on wall/ceiling as per specification No: WG-MA/CON. CSR 19-20

Supplying and erecting PVC trunking (PVC casing-n-capping) of size 25 mm with accessories on wall/ceiling as per specification No: WG-MA/CON. 1-2-10 CSR 19-20

Supplying & erecting mains with 2x1.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW 1-3-1 CSR 19-20

Supplying & erecting LED 20W tube light fitting (4 feet) with aluminium housing, heat sink, integrated HF electronic driver complete. 2-1-23 CSR 19-20

Supplying and erecting regular/ standard model ceiling fan of 1400mm. sweep complete erected in position as per specification no. FG-FN/CF 2-12-3 CSR 19-20

Providing earthing with copper earth plate size 30 x 30 x 0.315 cm complete with all materials, testing & recording the results as per specification no. EA-EP 9-1-2 CSR 19-20

Providing and laying Antiskid Ceramic tiles of approved quality of size 30 cm x 30 cm and confirming to IS 15622-2006 (Group-B IIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete.SSR Item No.33.67 BDM Page No.276

Providing and fixing M.S.steel door 24 Kilogram/ One Square Metre of various size as per detailed drawings without hot dip coating, iron fixtures and fastenings and 3 coats of oil painting etc As directed by Engineer in charge. SSR Item No.39.31 BDT page No.309

Providing and applying water proofing treatment using acrylic polymer modified cement based water proofing coating with fibre glass mesh mixing at the rate of powder to liquid (2:1) by weight covering 9 to 10 Square Metre /Kilogram with two coat using approved chemicals for masonry and concrete surface by brush covering 7 years guarantee on Stamp Papers etc. complete. SSR Item No.31.09 BDJ Page No.250

Providing and applying two coats of textured synthetic paint of approved shade and quality and one coat of primer before applying textured paint including scaffolding if necessary preparing surface by thoroughly cleaning oil, grease, dirt and other materials as required, etc. complete

Providing Electrical Fitting And Acc. As per requirment For whole building

Material Testing