Rural Development Department Tender

ITEM NO 4 Providing and applying tack coat on the prepared surface heating by fames in Boiler and spraying bitumen with sprayer on Dry Hungry B.T. surface 3 kg/10 sqm. (VG-30 bulk bitumen rates are considered to arrive at rates).

ITEM NO. : 5 Open Graded Premix Surfacing-Providing and Laying OGC 20 8 mm thickness composed of 13.2 mm to 5.6 mm aggregates premixed with bituminous binder transported to site with VTS, laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction but excluding prime/tack and Seal coat. For Bitumen of specified grade-USING drum mix type hot mix plant WITHOUT SCADA, Paver and Vibratory roller (Over MPM Surface) (VG-30 bulk bitumen rates are considered to arrive at rates)..

ITEM NO.: 6 Providing bituminous Type A liquid seal coat on bituminous surface including supplying all materials and bitumen of specified grade preparing existing road surface, heating and applying bitumen @ 0.98 KgSqm. by mechanical means, spreading chips and rolling, by static roller having weight 8 to 10 MT. etc. complete. (VG-30 bulk bitumen rates are considered to arrive at rates).

ITEM NO.: 7 Supplying hard murum/ kankar at the road site, including conveying and stacking complete.....(INo2-29A, PgNo 25) (STATE SSR) Item Spec: (MORTH 408)

ITEM NO.: 8 Spreading hard murum/ soft murrum/ gravel or kankar for side width complete....(INo2-30, PgNo 25) (STATE SSR) Item Spec: (MORTH 408)

ITEM NO.: 9 Compacting the hard murum side widths Including laying in layers on each side with vibratory roller including artificial watering etc. complete.....(INo2-31, PgNo 25) (STATE SSR) Item Spec: (MORTH 408)

ITEM NO.: 10 Providing and laying cement concrete pipe of IS 458:2003 NP-2 class of 600mm diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete.....

TEM NO.: 11 Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border/messages/symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge..

ITEM NO.: 1 Royalty Charges for HARD MURUM. Rate Royalty + surcharge (2%) (211.95 +4.23216.18 Per Cum)....(INo1-A, PgNo 1) ( STATE SSR) Item Spec: (As Directed By Engineer Incharge)

ITEM NO.: 2 Royalty Charges for METAL. Rate = Royalty + surcharge (2%)

ITEM NO.: 1 SOIL/MURUM Liquid limit & plastic Limit.....

ITEM NO.: 2 BASIC TEST OF AGGREGATE. Water Absorption, Specific Gravity. Impact Value Crushing Value.....

ITEM NO.: 3 BITUMEN Extraction Test (Bituminous Mix)…

ITEM NO.: 4 BITUMEN Penetration, Softening Point, Flash & Fire Point, Specific Gravity....

insurance 0.5%

GST 18%