Rural Development Department Tender

Item No. 3 :- Excavation for foundation in hard murum and boulders including removing the excavated material up to a distance 50 metres, beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5m.) By Mechanical Means [Bd.A.3 Page No. 259] (S.S.R. I.No. 21.10)

Item No. 4 :- Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) [Bd. E. 1 P.No. 287] (S.S.R.I.No. 24.01)

Item No. 5 :- Providing and laying in situ /Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) [Bd.F.3 P.No. 298 and B.7, P.No.38] (S.S.R.I.No. 25.11)

Item No. 6 :- Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) [Bd.F.5 Page No. 300 and B.7, Page.No. 38] (S.S.R.I.No. 25.31)

Item No. 7 :- Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) [Bd.F.6 Page No. 300 and B.7, Page No.38] (S.S.R.I.No. 25.50)

Item No. 8 :- Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete. [Bd.G.2 Page No. 313] (S.S.R.I.No. 27.01)

Item No. 9 :- Filling in plinth and floors with approved excavated material in 15cm. to 20cm. layers including watering and compacting etc. complete. [Bd.A.10 Page No. 262] (S.S.R. I.No. 21.36)

Item No. 10 :- Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete. [Bd.A.11 P.No.263 ] (S.S.R. I.No. 21.37)

Item No. 11 :- Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.[Spec.No. :Bd.F.17 Page No 306] (S.S.R.I.No. 26.33)

Item No. 12 :- Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete [Spec.No. :Bd.G.5 Page No. 315] (S.S.R.I.No. 27.05)

Item No. 13 :- Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. [Bd. L.2 P.No. 368] (S.S.R. I.No. 32.04 P.No. 201)

Item No. 14 :- Providing internal cement plaster 20mm thick in two coats in cement mortar 1:5 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete [Bd.L.4 Page No. 368] (S.S.R.I.No. 32.06)

Item No. 15 :- Providing and laying vitrified mirror / glossy finish tiles decorative type having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. a) Flooring [Bd.M. 12 P.No.385] (S.S.R. I.No. 33.40)

Item No. 16 :- Providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface ,applying primer coat ,scaffolding if necessary, and watering the surface for two days etc complete. [As directed by Engineer in charge.] (S.S.R.I.No. 35.26)

Item No. 17 :- Providing and applying Texture plaster with finishing with texture material of approved make in 3 to 4 millimeter thickness on previously plastered surface, including Plaster Groove 6mm thickness or Tape Grooves 35 to 45 mm thickness or as required, in all position including preparing the surface, scaffolding etc. complete. [As directed by Engineer in charge.] (S.S.R.I.No. 32.32)

Item No. 18 :- Providing and Fixing mat finish stainless steel (of 302 grade ) railing with top pipe of 50 mm dia. and vertical pipe of 38 mm dia at 0.60 m c/c or as required and horizontal pipes of 25 mm dia in three rows, all pipes of 2 mm thick including buffing,fabricating fixtures and fastening including pipe base of appropriate diameter and ball base of 75 mm dia above newel post of 75 mm diameter etc. complete (Prior approval of sample and brand by Ex.Engineer is necessary before use) [As directed by Engineer in charge.] (S.S.R.I.No. 40.08)

Item No. 19 :- Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete. Bd.C.2 Page No. 275 (S.S.R.I.No. 23.01 P.No. 167)

Item No. 20 :- Providing & fixing colour coated Zincalume ( R ) AZ150 (min 150 gms/sq.mt total on each side) profiled sheets for roofing the feed material is manufactured outof nominal 0.45mm base metal thickness (BMT) (0.5mm TCT) Hi-strength steel with min550 MPa yield strength metallic hot dip coated with aluminium -zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) with colorbond (R) steel quality super durable polyester paint coat (with inorganic pigment) The paint shall have a total coating thickness of nominal 35 um comprising of nominal 25um exterior coat on top surface & nominal 10um reverse coat on back surface Profile sheet shall have nom 950-1050mm effective cover width & nominal 25-30mm deep ribs with subtle square fluting in the five pan at nominal 180-250mm C/C The end rib shall be designed for anti-capillary groove & return leg The feed material should have coil manufacturers product details marked a regular interval Including fasteners with min fastened with min 25um Zinc-Tin alloy coated Hex head self-drilling screw etc complete (weight of profile 4.52 kg/sqm) (S.S.R.I.No. 38.34 P.No. 227)

Item No. 21 :- Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. [As directed by Engineer in charge.] (S.S.R. I.No. 21.40)

Item No. 22 :- Providing & fixing heavy duty inter locking concrete RUBBER MOULD GLOSSY PAVING BLOCKS of 80 mm thickness of having a strength of 400 Kg/sqm of approved quality & shape on a bed of crushed sand of 25 to 30 millimeter thick including striking joints & cleaning etc. complete (using 100% crushed sand) [Bd. M12 P.No. 385] (S.S.R. I.No. 33.54 P.No. 211)

Item No 23 :- Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. As directed by Engineer in Charge (S.S.R.I.No. 6.36 )