Rural Development Department Tender

Providing and laying in situ cement concrete of grade M-15 of trap / granite / gneiss / quartzite / graded metal for foundation and bedding with Concrete Mixer including placing, compacting, curing with an initial lead of 1 km and all lifts etc. complete as directed.

Providing and laying in situ cement concrete of grade M-15 of trap / granite / gneiss / quartzite / graded metal for PCC with or without surface reinforcement / RCC concreting requiring heavy or special type of shuttering for works of gallery, sluice, spillway crest, spillway downstream face, energy dissipating structures, intake structures, training walls, piers, abutments etc. with Concrete Mixer considering lead of 50 m with shuttering and scaffolding, placing, compacting, curing etc. complete with an initial lead of 50 m. & lift of 1.5 m.

Providing and laying Tor steel reinforcement for RCC work such as slab, piercaps,gaurdstones etc. including cutting,hookinglaying in position etc. with all leads and lifts

Providing hearting embankment using selected impervious material available directly from excavation in layers including cost of all materials, machinery,labour, all other operations such as collection of material, spreading soil in layer of specified thickness, sorting out, breaking clods, leveling, sectioning edges / sides, watering, compacting each layer to density control of not less than 95 percent or as stipulated using vibratory compactor including cost of water etc.complete with lead up to 1 km and all lifts as directed

Providing and fixing canal information board of 1.2 x 0.75 m prepared on 16 gauge M.S. sheet with angle iron frame of size 35 X 35 X 3 mm with cross bracing of size 25 X 25 X 3 mm including painting with one coat of zinc chromate storing primer and two coats each of green/white back ground and back side grey store enamelled bonded with red retro reflective sheet Engineering grade, border / letters / numeral / arrows coated with non pealable crystal clear protective transparent coat retaining 100% reflection including two angle iron post of size 50X50X5 mm of 3.65 m long inflated at bottom drilled on top and painted in white and black bonds of 30 cm with four numbers high strength of G.I. bolts and nuts of size 10 mm dia. and 20 mm long sheet and angle iron post in one piece without joints including all taxes, conveying, fixing in ground with cement concrete in M-15 block of size 60 X 60 X 75 cm as directed by engineer-in-charge.

Charges for Laboratory Test required during work - Fine Aggregate Finess Modulus , Silt & Clay Content

Charges for Laboratory Test required during work - Coarse Aggregate Sieve Analysis,Water Absorption & Specific Gravity , Flankness Index and Crushing Value

Charges for Laboratory Test required during work - Cement Stanadard Consistency ,Setting Time ,Specific Gravity &Compressive Strength

Charges for Laboratory Test required during work - Steel ( Tensile strength, % , Elongation, Yield Stress, Weight- Per Meter,Bend/ Rebend Test, Proof Stress.)

Charges for Laboratory Test required during work - Concrete Cube Compressive/Split tensile strength ( 7 days 3 Cubes and 28 days 3 Cubes)