Rural Development Department Tender

Providing and constructing 75 mm. thick Modified Penetration Macadam (MPM) road surface including all materials, preparing the existing road surface, spreading 40 mm. stone metal layers 30% crusher broken metal + 70% Hand broken (by breaking rubble obtained by blasting) heating and spraying the bitumen of VG30 grade @ 2 Kg/sqm, spreading 12 mm.size chips compacting with three wheel static roller having weight 8 to 10 MT. to achive the desired degree of compaction as per Technical Specification Clause 506 etc. complete. Including picking of existing WBM surface. MORTH Square Metre 377 1 Road Sub Base and Base Course ( E-DSRI.No. 3.35 Page No.30 )

Providing and applying tack coat on the prepared surface heating by fames in Boiler and spraying bitumen with sprayer on Dry / Hungry B.T. surface 3 kg/10 sqm. (VG-30 bulk bitumen rates are considered to arrive at rates) MORTH 503 Square Metre(SSRI.No.3.31)

Open Graded Premix SurfacingProviding and Laying OGC 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates premixed with bituminous binder transported to site with VTS , laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction VG30 Bitumen, including providing and laying seal coat sealing voids in a bituminious surface laid to the specified level and cross fall using Type A seal coat but excluding prime / tack coat. For Bitumen VG30 bulkUSING drum mix type hot mix plant with SCADA, Paver and Vibratory roller MORTH 510 Square (DSR Item No.4.08 Page No.36)

Providing bituminous Type A liquid seal coat on bituminous surface including supplying all materials & bitumen of VG30 grade preparing existing road surface, heating and applying bitumen @ 0.98 KgSqm. by mechanical means, spreading chips and rolling, by static roller having weight 8 to 10 MT. etc. complete. MORTH 511 Square Metre 52 7 Road Surfacing Course (DSR Item No.4.08 Page No.26)

Excavation for catch / side water gutter in all sorts of soils to the specified section including stacking the excavated stuff in a regular bund and disposing of unsuitable or excess stuff as directed all sorts of soils. By Mechanical Means (E-DSR Item No.2.18 Page No.22)

Supplying hard murum/ kankar at the road site, including conveying and stacking complete. (E-DSR Item No.2.29 Page No.28)

Spreading hard murum for side width etc. complete (E-DSR Item No.2.30 Page No.28)

Compacting the hard murum side widths including laying in layers on each side with power roller including artificial watering etc. complete. etc. complete (E-DSR Item No.2.31 Page No.24)

Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge(E-DSR Item.No.6.36 Page No.71)

Add.G.S.T.18%

Add.Labour Insurance 1%

SQM charges 1%

Add.Royalty

Pentration test for Asphalt