Rural Development Department Tender

Excavation in hard rock of all toughness by blasting including boulders above 0.6 m dia.(0.113Cum) minimizing damage to side slopes of excavation in water prism area by adopting any one or combination of line drilling /pre-splitting /smooth blasting techniques and placing the excavated rock neatly in approved dump area including cost of all materials, machinery, labour, leveling bed etc., complete with lead up to 15 m and all lifts as directed

Providing and laying in situ cement concrete of grade M-15 of trap / granite / gneiss / quartzite / graded metal for (40MAS) PCC for below the sill level with or without surface reinforcement / RCC work of Gallery sluce spilway crest spillway energy dissipating structur slab etc. with concrete mixer including shuttering and scaffolding placing compacting curring etc comp with all initial lead 50 m & lift 1.50 m.

Providing and laying in situ cement concrete of grade M-15 of trap / granite / gneiss / quartzite / graded metal for (20MAS) PCC for below the sill level with or without surface reinforcement / RCC work of Gallery sluce spilway crest spillway energy dissipating structur slab etc. with concrete mixer including shuttering and scaffolding placing compacting curring etc comp with all initial lead 50 m & lift 1.50 m.

Providing and laying in situ cement concrete of grade M-20 of trap / granite / gneiss / quartzite / graded metal for RCC work of Gallery sluce spilway crest spillway energy dissipating structur slab etc. with concrete mixer including shuttering and scaffolding placing compacting curring etc comp with all initial lead 50 m & lift 1.50 m.(RCC Slab)

Providing and laying in situ cement concrete of grade M-20 of trap / granite / gneiss / quartzite / graded metal for RCC work of Gallery sluce spilway crest spillway energy dissipating structur slab etc. with concrete mixer including shuttering and scaffolding placing compacting curring etc comp with all initial lead 50 m & lift 1.50 m(.Wearing coat)

providing and placing deformed steel reinforcement as per desing drawing cutting bending hooking laying in position and typing M S /HYSD /TMT bars reinforcement of RCC work as per daitailedetc comp.

Providing & fixing sill beam ISWB 150X175mm channel ISWB 150 x 75mm as per detaileddesign & drawing including one coat of anti corresive paint with two coats of oil paint with all lead and lift as per drawing.

Providing & fixing sill beam ISWB 150X175mm channel ISWB 150 x 75mm as per detaileddesign & drawing including one coat of anti corresive paint with two coats of oil paint with all lead and lift as per drawing.

straight needle manufacturing withQAP & fabrication of kt weir needle gate straight type size 2.15 x 0.50m 94 kg .weight as per reievate india standards with all material mild steel confirming to is 2062 rubber seal confirming to is 4623 2 coat of sloventless cat tar epoxy paint applied to give minimum dry film thickness of 150+ / 5- micron per coat as per IS 14177

back filling up to ground level behind the canel structure etc comp.without royalty with suitable materialof approved qulity in layers not exceeding 20cm without distrurbing the srtucture.

Providing and constructing 300 mm thick dry rubble stone pitching stone chips from approved source including cost of all materials, labour, hand packing / wedging stone chips, finishing etc., complete with lead up to 50 m and all lifts as directed. (From BORROW)

Providing earth work embankment using selected pervious material available directly from excavation in layers including cost of all materials, machinery, labour, all other operations such as collection of material, spreading material in layer of specified thickness, sorting out, breaking clods, leveling, sectioning edges / sides, watering, compacting each layer to density control of not less than 95 percent or as stipulated using vibratory compactor including cost of water etc. complete with lead up to1 km and all lifts as directed.

Dewatering by pumping out water collecting with 10 to 19 hp diesel & electrical pumps inclunding cast of all material comp.under specific and indispennsable circumstance with prior oll lead and lift.

Providing and fixing canal information board of 1.2 x 0.75 m prepared on 16 gauge M.S. sheet with angle iron frame of size 35 x 35 x 3 mm with cross bracing of size 25 x 25 x 3 mm including painting with one coat of zinc chromate storing primer and two coats each of green/white back ground and back side grey store enameled bonded with red retro reflective sheet Engineering grade, border / letters / numeral / arrows coated with non peal able crystal clear protective transparent coat retaining 100% reflection including two angle iron post of size 50x50x5 mm of 3.65 m long inflated at bottom drilled on top and painted in white and black bonds of 30 cm with four numbers high strength of G.I. bolts and nuts of size 10 mm dia. and 20 mm long sheet and angle iron post in one piece without joints including all taxes, conveying, fixing in ground with cement concrete in M-15 block of size 60 x 60 x 75 cm as directed by Engineer-in-Charge.

Royalty not included in rates

GST(18%)

GIS(1%)