Rural Development Department Tender

Item No. 4 :- Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. Including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete as directed.

Item No. 5 :- Providing and laying in situ cement concrete of grade M-15 ( 40 MSA ) of trap / granite / gneiss / quartzite / graded metal for PCC with or without surface reinforcement / RCC concreting requiring heavy or special type of shuttering for works of gallery , sluice , spillway crest , spillway downstream face , energy dissipating structures , intake structures , training walls , piers , abutments etc. with concrete mixer considering lead of 50 m with shuttering and scaffolding , placing , compacting , curing etc. complete with initial lead of 1 km and all lifts etc. complete as directed..( RCC for Body wall)

Item No. 6 :- Providing and laying in situ cement concrete of grade M-15 ( 20 MSA ) of trap / granite / gneiss / quartzite / graded metal for PCC with or without surface reinforcement / RCC concreting requiring heavy or special type of shuttering for works of gallery , sluice , spillway crest , spillway downstream face , energy dissipating structures , intake structures , training walls , piers , abutments etc. with concrete mixer considering lead of 50 m with shuttering and scaffolding , placing , compacting , curing etc. complete with initial lead of 1 km and all lifts etc. complete as directed.

Item No. 7:- Back filling up to ground level behind the canal structures etc. complete ( without royalty ) with suitable material of approved quality in layers not exceeding 20 cm without disturbing the structure etc. complete.as directed.

Item No. 8 :- Providing and fixing M. S. channels of 125x65 mm of approved quality with all fixtures etc. complete.

Item No. 9 :- staright needle KT weir Gate - Manufacturing with QAP & fabrication of KT weir needle gates - straight type size 2.15*0.50 M - 94 Kg weight as per relevant Indian standards with all material , Mild steel confirming to IS 2062 , Rubber seal confirming to IS 4623 & welding electrodes AWS E6013 for general weld joints. It includes all materials , Labour charges , machinery charges , 1 Km lead charges of transportation ,loading and unloading charges of Gate parts at site , Inspection & Quality control charges , Sand blasting , Painting with one coat of Zinc rich primer on dry film to give total dry film thickness 70 +/- 5 microns and 2 coats of sloventless coal tar epoxy paint applied to give minimum dry film thickness of 150 +/- 5 micron per coat as per IS 14177 , overhead charges of 10% , and all incidental charges including all duties , taxes , levies and insurance charges.

Item No. 10:- Providing AC/PVC pipes of 150mm or 6" dia For 2.50 Kg/Sqm pressure & required length for relieving water pressure as directed etc complete with lead upto 50 m and all lifts

Item No.11 :- Providing and constructing 230 mm thick dry rubble stone pitching using stones and stone chips from approved source from borrow areaincluding cost of all materials, labour, hand packing / wedging stone chips, finishing etc., complete with lead up to 50 m and all lifts.

Item No. 12:- Providing and fixing canal information board of 1.20 * 0.75 m prepared on 16 gauge M.S. sheet with angle iron frame of size 35*35*3 mm with cross bracing of size 25*25*3 mm including painting with one coat of zinc chromate storing primer and two coats each of green/white back ground and back side grey store enamelled bonded with red retro reflective sheet Engineering grade , border / letters / numeral / arrows coated with non pealable crystal clear protective transparent coat retaining 100% reflection including two angle iron post of size 50*50*5 mm of 3.65 m long inflated at bottom drilled on top and painted in white and black bonds of 30 cm with four numbers high strength of G.I. bolts and nuts of size 10 mm dia. and 20 mm long sheet and angle iron post in one piece without joints including all taxes , conveying , fixing in ground with cement concrete in M-15 block of size 60*60*75 cm as directed by engineer-in-charge.