Rural Development Department Tender

Item No.- 4 Excavation in hard rock of all toughness by blasting including boulders above 0.6 m dia.(0.113Cum) minimizing damage to side slopes of excavation in water prism area by adopting any one or combination of line drilling /pre-splitting /smooth blasting techniques and placing the excavated rock neatly in approved dump area including cost of all materials, machinery, labour, leveling bed etc., complete with all leads and lifts as directed.

Item No.- 5 Providing and fixing anchor bar of 25 mm diameter 3.375 m length with resin bond cement capsule anchorage through adit / itself including drilling holes, inserting grout capsule, driving anchor, cost of all materials, machinery, labour, ventilation, lighting, drainage and other ancillary operations etc. complete with all leads and lifts as directed.

Item No.- 6 Providing and laying in situ cement concrete of grade M-15 of trap / granite / gneiss / quartzite / graded metal for PCC with or without surface reinforcement/ RCC concreting requiring heavy or special type of shuttering for works of gallery, sluice, spillway crest, spillway downstream face, energy dissipating structures, intake structures, training walls, piers, abutments etc. with Concrete Mixer with shuttering and scaffolding, placing, compacting, curing with all leads and lifts as directed. (Foundation) (B) M-15 (40 MSA) (Cement 5.20 bags/Cum)

Item No.- 7 Providing and laying in situ cement concrete of grade M-15 of trap / granite / gneiss / quartzite / graded metal for PCC with or without surface reinforcement/ RCC concreting requiring heavy or special type of shuttering for works of gallery, sluice, spillway crest, spillway downstream face, energy dissipating structures, intake structures, training walls, piers, abutments etc. with Concrete Mixer with shuttering and scaffolding, placing, compacting, curing with all leads and lifts as directed. (Super Structure) (B) M-15 (40 MSA) (Cement 5.20 bags/Cum)

Item No.- 8 Providing and laying Tor reinforcement for various dia. As per design and drawing including all leads and lifts for one Tonne. Including cuttiing,bending,hooking,Tying cost of binding wire etc

Item No- 9. Backfilling upto ground level behind canal structure etc. Complete with suitable material of approved quality in layers not exceeding 20cm without distrubing the structure etc complete as directed.

Item No- 10. Manufacturing with QAP & fabrication of KT weir needle gates - straight type size 2.15 x 0.5M - 94 Kg. weight as per relevant Indian Standards with all material, Mild steel confirming to IS 2062, Rubber seal confirming to Is 4623 & Welding electtodes A WS E6013 for general weld joints. It includes all materials, Labour charges, machinery charges, 1km lead charges of transportation, loading and unloading charges of Gate parts at Site, Inspection & Quality control charges, Sand blasting, Painting with one coat of Zinc rich primer on dry film to give total dry film thickness 70 +/- 5 microns and 2 coats of sloventless coial tar epoxy paint applied to give minimum dry film thickness of 150 +/- 5 micromn per coat as per IS 14177.

Item No.-11 Providing and fixing canal information board of 1.2x0.75 m prepared on 16 gauge M.S. sheet with angle iron frame of size 35x35x3 mm with cross bracing of size 25x25x3 mm including painting with one coat of zinc chromate storing primer and two coats each of green/white back ground and back side grey store enameled bonded with red retro reflective sheet Engineering grade, border/letters/numeral / arrows coated with non-peal able crystal clear protective transparent coat retaining 100% reflection including two angle iron post of size 50x50x5 mm of 3.65 m long inflated at bottom drilled on top and painted in white and black bonds of 30 cm with four numbers high strength of G.I. bolts and nuts of size 10 mm dia. and 20 mm long sheet and angle iron post in one piece without joints including all taxes, conveying, fixing in ground with cement concrete in M-15 block of size 60x60x75 cm with all leads and lifts as directed.

Item No.12. Providing Fabricating & Fixing in position permenent structural steel supports through adit/itself as per details including cost of all materials,machinary,labour,cutting, bending,welding,grinding,lighting,ventilation,drianage and all other ancillry operation etc. complete with all lifts.

Item No.13 Testing Charges C.C.M 15 (40 MSA) For Crushed sand if required mix design

Concrete cube test for sets

Cement all test

Fine agg. Soil & Clay content test

Course agg. Test