Rural Development Department Tender

Item No.4:Excavation in Soft Rock without blasting including boulders up to 0.6 m diameter (0.113 cum) for canal, seating of embankment, filter drain / catch water drains etc., and placing the excavated soft rock neatly in dump area or for formation of service road as directed including cost of all materials, machinery, labour, dressing bed and sides to required level and profile etc., complete with lead up to 15 m and 6m lift.

Item No.5:Providing and fixing deformed cold twisted (Tor) steel bar reinforcement including Cutting, bending, hooking, laying in position and tying M.S./HYSD/TMT bars for reinforcement as per detailed drawing etc. complete with all leads and lifts as directed and as per specifications.

Item No.6: Providing and laying in situ cement concrete of grade M-15 of trap / granite / gneiss / quartzite /graded metal for PCC with or without surface reinforcement/RCC Concreting required heavy or special type of shutter for work of gallary/sluic spillway down stream sight creast energe desipacing structure intake structure training wells weir abutment etc. with concrete mixture considering lead of 50 mtr. with shuttering and scaffolding placing compacting curing etc. complete with an initial lead of 50 m & lift of 1.5 m.

Item No.7: Providing earth work in embankment and for Back filling in trenches behind abutment , wings, bodywall etc. with available spoils of approved quality from excavation spoils including laying in layers, breaking clods etc. as directed with all leads and lifts etc. complete. (Excluding Royalty) .

Item No.8:Providing and constructing 230 mm thick dry rubble stone pitching using stones and stone chips from approved source from borrow area including cost of all materials, labour, hand packing / wedging stone chips, finishing etc., complete with lead up to 50 m and all lifts excluding royalty of material.

Item No.10:Providing and fixing scheme information board of 1.2 x 0.75 m prepared on 16 gauge M.S. sheet with angle iron frame of size 35 X 35 X 3 mm with cross bracing of size 25 X 25 X 3 mm including painting with one coat of zinc chromate storing primer and two coats each of green/white back ground and back side grey store enamelled bonded with red retro reflective sheet Engineering grade, border / letters / numeral / arrows coated with non pealable crystal clear protective transparent coat retaining 100% reflection including two angle iron post of size 50X50X5 mm of 3.65 m long inflated at bottom drilled on top and painted in white and black bonds of 30 cm with four numbers high strength of G.I. bolts and nuts of size 10 mm dia. and 20 mm long sheet and angle iron post in one piece without joints including all taxes, conveying, fixing in ground with cement concrete in M-15 block of size 60 X 60 X 75 cm as directed by engineer-in-charge.