Rural Development Department Tender

Supplying hard murum / soft murum /gravel or kankar for side width complete (DSR I.NO.2.30 P.NO.29)

Providing and laying in situ/ Ready mix/ ready mix M-10 cement concrete of trap / granite / quartzite /gneiss metal in foundation including necessary centering, formwork, bailing out water, formwork laying/pumping compacting roughening them if special finish is to be provided finishing is to be provided finishing if required and curing etc. complete. With fully automatic microprocessor based PLC with SCADA enabled with reversible drum type mixer/ concrete batch mix plant(Pan mixer) etc compete with fine aggregate ( natural Sand / Crushed Sand VSI Frade finely Washed etc Spec No. ITEM NO.24.01 & PAGE NO.226 )

Providing and fixing heavy duty inter locking concrete Gray paving blocks of 60 mm thickness of having a strength of 300 kg/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete. As directed By Engineer in charge.(using 100 % crushed sand) DSR ITEM NO.33.49 & PAGE NO.280

Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, Steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer with Natural Sand Spec Bd.E.4 Page No. 289 and B-7, Page No.38

Providing and fixing board displaying information, such as Name of work, Tender cost, Name of Contractor, Work completion and liability period-etc'rtravtnq rectanqular shape of 1.20 m x 0.90 m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border/ messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 rnrnec mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1 :4:8 concrete block of size 60 cmx 60 cmx 75 cm including, excavation, refilling, transportation, and labour etc . As directed by Engineer in chages (Item no.6.36 & P.NO.73)

Royalty Charges for materials + 2 % Surcharges For METAL

Laboratory testing Charges Commpressive Strength of Paving Block

ADD 12 % FOR GST CHARGES

ADD 1 % LABOUR INSURANCE

B) Internal Cement Concrete Drain Excavation for foundation in earth, soils of all types sand, gravel and soft murum,Including removing the excavated meterial upto a distance of 50 M beyond the building area stacking and spreading as directed, dewatering,prepairing the bed for the foundation and necessary back filling ,ramming, watering Including shoring and strutting etc.complete ( Lift up to 2km ) Spec No.Bd.A.1 Page No 259 DSR ITEM NO.21.02 & PAGE NO.197

Providing and laying in situ/ Ready mix/ ready mix M-10 cement concrete of trap / granite / quartzite /gneiss metal in foundation including necessary centering, formwork, bailing out water, formwork laying/pumping compacting roughening them if special finish is to be provided finishing is to be provided finishing if required and curing etc. complete. With fully automatic microprocessor based PLC with SCADA enabled with reversible drum type mixer/ concrete batch mix plant(Pan mixer) etc compete with fine aggregate ( natural Sand / Crushed Sand VSI Frade finely Washed etc Spec No. ITEM NO.24.01 & PAGE NO.226 )

Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, Steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only.Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer Natural Sand /) Spec No Bd.E.4 Page No. 289 and B-7, Page No.38

Providing and fixing in position T.M.T-FE-500 bar reinforcement of various diameters for reinforced cement concrete pile caps, footing, foundations, slabs, beams, columns, canopies, stair case, newels, chajjas, lintels, pard is, copings, fins, arcnes etc. as per detailed designs, drawings and schedules including cutting, bending, hooking the bars, binding with wlres or tack welding and supporting as required complete. Spec No Bd.F.17 Page No. 306 DSR ITEM NO.26.33 & PAGE NO.245

Providing and laying cast in situ/ ready mix cement concrete in M 20 of trap / granite / quartzite /gneiss metal for R.C.C. slabs and landings as per detailed designs and drawing or as directed including centering formwork, cover blocks, laying/pumping compaction finishing the formed surfce with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel)With fully automatic microprocessor based PLC with SCADA enabled with reversible drum type mixer/ concrete batch mix plant(Pan mixer) with natural sand/VSI quality artificial sand Spec No Bd.F.8 Page No. 302 and B.7, Page.No. 38 DSR OF ITEM NO.25.70 & PAGE NO.236

Providing and fixing board displaying information, such as Name of work, Tender cost, Name of Contractor, Work completion and liability period-etc'rtravtnq rectanqular shape of 1.20 m x 0.90 m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border/ messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 rnrnec mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1 :4:8 concrete block of size 60 cmx 60 cmx 75 cm including, excavation, refilling, transportation, and labour etc . As directed by Engineer in chages (Item no.6.36 & P.NO.73)

Royalty Charges for materials + 2 % Surcharges +10 % CESS fo SAND

Laboratory testing Charges Commpressive Strength of C.C.Cube

ADD 12 % FOR GST CHARGES

ADD 1 % LABOUR INSURANCE