Rural Development Department Tender

Item No.4 :- Providing MS / HYSD / TMT bar reinforcement of R C.C.Work as per detailed drawing or directed by Engineer incharge Including cutting , bending, hooking and laying in position and tying with G.I.wire etc Complete..

ItemNo.5 :- Providing & laying in situ Cement concrete of grade M-15 ( 40 MSA ) of trap / granite / quartzite/ graded metal for PCC with or without surface reinforcemnet / RCC concreting requiring heavy or special type of shuttering for works of gallery, sluice spilway crest, spilway downstream face, energy dissipating ,structures, intake structures, training walls, picers, abutments etc. with concrete mixer with shuttering and scaffolding, placing compacting, curing with an initial lead of 1 km & all lift etc Complete as directed..

Item No.6 . Back filling upto ground level behind the canal structure etc complete with suitable material of approved quality in layers not exceeding 20 cm without disturbing the structure etc. complete as directed.

Item No.7. Nala Regradation including excavation in soil, silt, lime, shadu, soft murum, hard murum (machinery rate only) and stacking/ dressing the material by Public Participence as directed with all leads and lifts etc. complete.

Item No.8. Providing and constructing 230 mm thick dry rubble stone pitching using stones and stone chips from approved source from barrow area including cost of all material, labour, hand packing / wedging stone chips, finishing etc. complete. With lead up to 50 m and all lifts as directed.

Item No. 9 :- Providing & Fixing Information Board of 1.2 x 0.75 m prepared on 16 guage M.S. sheet with angle iron frame of size 35 x 35 x 3 mm with cross bracing of size 25 x 25 x 3 mm including painting with one coat of zinc chromate storing primer and two coats each of green/white background and back side grey store enameled bonded with red retro reflective sheet Engineering grade, border / letters / numeral / arrows coated with non peal able crystal clear protective transparent coat retaining 100% reflection including two angle iron post of size 50x50x5 mm of 3.65 m long inflated at bottom drilled on top and painted in white and black bonds of 30 cm with four numbers high strength of G.I. bolts and nuts of size 10 mm dia and 20 mm long sheet and angle iron post in one piece without joints including all taxes, conveying, fixing in ground with cement concrete in M-15 block of size 60 x 60 x 75 cm as directed by Engineer - in - charge.