Rural Development Department Tender

Item No-4 Supplying hard murum/ kankar at the road site, including conveying and stacking complete. SSR Item No-2.29a

Item No-5 Supplying soft murum at the road site, including conveying and stacking complete. SSR Item No-2.29b

Item No-6 Spreading 80/40 mm metal for road work including sectionong etc complete as directed by Engineer in charge . SSR Item No-50.58 Specification No- As directed by Engineer-in-charge

Item No- 7 Spreading hard murum/ soft murrum/ gravel or kankar for side width complete SSR Item No-2.30

Item No- 8 Compacting the sub grade / gravel / size metal (100 mm loose) layers for all widths with Power roller having weight 8 to 10 MT. including necessary, labour, materials and artificial watering complete. . SSR Item No-50.61 Specification No- As director by engineer in charge

Item No-9 Compacting the hard murum side widths including laying in layers on each side with vibratory roller including artificial watering etc. complete.SSR Item No-2.31

Item No-10 Providing and constructing 50 mm. thick Modified Penetration Macadam (MPM) road surface including all mataerials, preparing the existing road surface, spreading 40mm. stone metal layers 30% crusher broken metal + 70% Hand broken (by breaking rubble obtained by blasting) heating and spraying the bitumen of specified grade @ 1.75 kg/sqm, spreading 12mm.size chips compacting with static roller having weight 8 to 10 MT. to achive the desired degree of compaction as per Technical Specification Clause 506 etc. complete. Including picking of existing WBM surface.(VG-30 bulk bitumen rates are considered to arrive at rates) SSR Item No-3.37a Specification No- MORTH 505

Item No-11 Providing and applying tack coat on the prepared surface heating by fames in Boiler and spraying bitumen with sprayer on Dry / Hungry B.T. surface 3 kg/10 sqm. (VG-30 bulk bitumen rates are considered to arrive at rates) SSR Item No-3.31 Specification No- MORTH 503

Item No-12 Open Graded Premix Surfacing- Providing and Laying OGC 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates premixed with bituminous binder transported to site with VTS , laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction but excluding prime / tack and Seal coat. For Bitumen of specified grade--USING drum mix type hot mix plant with SCADA, Paver and Vibratory roller ( Over MPM Surface) (VG-30 bulk bitumen rates are considered to arrive at rates) SSR Item No-4.12 Specification No- MORTH 510

Item No-13Providing bituminous Type A liquid seal coat on bituminous surface including supplying all materials and bitumen of specified grade preparing existing road surface, heating and applying bitumen @ 0.98 KgSqm. by mechanical means, spreading chips and rolling, by static roller having weight 8 to 10 MT. etc. complete. (VG-30 bulk bitumen rates are considered to arrive at rates) SSR Item No-4.01 Specificaion No- MORTH 511

Item No-14 Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge SSR item No-6.36Specification No-MORTH 801

Item No-15 Shooting still photographs

GST Charges

Labour Insurance Charges