Rural Development Department Tender

Excavation in all types of soil / silt / soft murum / lime shadu / hard murum, soft rock for nalla deepening (exceeding 1.50 m. in width) including depositing the excavated material as directed with all leads and lifts including dressing etc.complete.

Drilling 32 mm diameter grout holes in concrete/rock by per cusion drilling using jack hammer as directed to specified depth for consolidation / contact grouting including cost of all materials, machinery, labour, cleaning holes, ventilation, lightening, drainage and all other ancillary operations etc., complete.

Providing and laying in situ cement concrete of grade M-15 of trap / granite / gneiss / quartzite / graded metal (20 msa.)for PCC with or without surface reinforcement / RCC concreting requiringheavyor specialtypeof shuttering for works of gallery, sluice, spillway crest, spillway downstream face, energy dissipating structures, intake structures, training walls, piers, abutments etc. with Concrete Mixer considering lead of 50 m with shuttering and scaffolding, placing, compacting, curing etc. complete with an initial lead of 50 m. & lift of 1.5 m.

Providing and fixing deformed cold twisted ( TMT ) Steel reinforcement bars of various sizes as per design, drawing & schedule including cuttings, bending, hooking, placing at the desired location, binding with G.I.Wire, supporting with all leads & lifts, etc. complete as directed and as per specifications.(For RCC works). (including cost of binding wire).10 MM

Providing and fixing deformed cold twisted ( TMT ) Steel reinforcement bars of various sizes as per design, drawing & schedule including cuttings, bending, hooking, placing at the desired location, binding with G.I.Wire, supporting with all leads & lifts, etc. complete as directed and as per specifications.(For RCC works). (including cost of binding wire). 25 MM

Providing,erecting and laying,Galvanized net of 10 cm x 10cm mesh (Galvanized wire of 4 mm diameter) fir Dabian structure.etc complete.

Providing and constructing 230 mm thick dry rubble stone pitching with pin headers at 2 per sqm using stones and stone chips from approved source including cost of all materials, labour, hand packing / wedging stone chips, finishing etc., complete with lead up to 50 m and all lifts excluding royalty of material.

Providing and fixing canal information board of 1.2 x 0.75 m prepared on 16 gauge M.S. sheet with angle iron frame of size 35 x 35 x 3 mm with cross bracing of size 25 x 25 x 3 mm including painting with one coat of zinc chromate storing primer and two coats each of green/white back ground and back side grey store enameled bonded with red retro reflective sheet Engineering grade, border / letters / numeral / arrows coated with non peal able crystal clear protective transparent coat retaining 100% reflection including two angle iron post of size 50x50x5 mm of 3.65 m long inflated at bottom drilled on top and painted in white and black bonds of 30 cm with four numbers high strength of G.I. bolts and nuts of size 10 mm dia. and 20 mm long sheet and angle iron post in one piece without joints including all taxes, conveying, fixing in ground with cement concrete in M-15 block of size 60 x 60 x 75 cm as directed by Engineer-in-Charge.

Royalty not included in rates

GST(18%)

GIS(1%)