Rural Development Department Tender

Item No.4 :- Supplying and erecting Street light bracket for erection of side entry fitting on pole with 40 mm. dia. ‘B’ class G.I. pipe of required length complete as per specification no. FG-BKT/SLB(CSR No. 2-7-9)

Item No.5 :- Supplying and erecting integrated LED street light fitting 60W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 6600 Lumens, min. efficacy of 110 lumen/W, CRI70, CCT upto 6500K, THD10%, p.f. 0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification No FG-ODF/FLS2(CSR No. 2-4-5)

Item No.6 :- Supplying, erecting & marking SPMCB 6A to 32A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB (CSR No. 5-3-3)

Item No.7 :- Supplying & erecting CRCA sheet metal one way enclosures of 1.2mm thickness suitable for DP MCB /TP MCB/FP MCB/RCCB/RCBO complete erected on angle iron/GI frame. .(CSR No. 5-4-13)

Item No. 8: Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority. (6-1-19)

Item No. 9: Providing & erecting 6 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 130 mm A/F, top 70 mm A/F on provided foundation as per specification no. OH-PL/OPL (8-2-12)

Item No. 10: Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 6m to 8m high octagonal /conical GI pole). (16-3-9)

Item No. 11 : Providng earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification no. EA-EP (9-1-1)

Item No. 12: Supplying and erecting self-locking arrangement with keys in duplicate, made of brass of grade 1 compliance to IS 729-1979 duly erected, flush with surface of panel / cupboard (6-1-20)

Item No. 13: Supplying and erecting metal work in CRCA sheet including Iron work for supports with fabrication of boxes, panel boards, etc. including cutting, bending, drilling, welding, riveting, treated with anti-rust treatment and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paint complete. (6-1-1)

Item No. 14 : Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with insulating and non-corrosive bond with required joints As per specification no. EA-EP. (9-2-8)

Item No. 15: Supplying, installing, testing and commissioning of solar panel comprising high efficiency polycrystalline / multi' crystalline photovoltaic cell 250Wp, 26V with necessary clamps and module frame on existing structure complete with following Specification maximum power 250 Wtt. Open circuit voltage 24V, short circuit current (ISE) 9.21AA Voltage at maximum power (Vmp/Vmpp) 17.3V current at maximum power (Imp): 7.95A, operting (Nominal) Voltage 24V dimension 1640x985x45 in mm complete (With Five Years Warranty) (Non CSR)(Approved By Superintending Engineer Nanded PWD Electrical Region Nanded No. 1970 /2023 Date :- 31/10/2023

Item No. 16: Supplying and erecting DC Light Emitting Diode Flood light fitting of 24V 25W, including first 6 hr full intensity light output and following 6 hr. with half intensity light output , with lumen 3750, colour temp 5500K -6500K, colour redering index 70 , PWM charge controller efficiency 90 %, DC Light Emitting Diode driver efficiency 90%. Duty cycle first six hours 100%, Rest 50% light, DC Light Emitting Diode external optics 145X90 degree street light lens , class IP 66. charge controlller methodology - three stage battery charge monitoring algorithm, maximum charging current 20Amps. short circuit protection, battery over charge protections, battery deep discharge protection, solar panel dusk to dawn operation NTTV- 4V, DTTV- 6V. battery low load disconnect voltage 22.4V. battery full load disconnect voltage 26V. battery constant voltage set point 29.4V Light Emitting Diode indication green of battery not charging PV low, green on battery charging green flashing battery full, rate of battery not discharge, red on: battery disciarge, load disconnect over on dimentions 255mm x 90mm x 60mm, over all weight 1kg & above housing of pressure die cast aluminium alloy and heat sink extruted aluminium complete. (NON CSR) (Five Years Warranty)(Approved By Superintending Engineer Nanded PWD Electrical Region Nanded No. 1970 /2023 Date :- 31/10/2023

Item No. 17: Supplying, installing, testing and commissioning Of Lifepo4 battery with capacity of 24V-78 Ah with 8S 15A BMS, Cell having duty cycle 3000 suitable to charge lithium cell with necessary wiring connections, With IP 65 alluminium cabinet with stand and nut bolts complete ( Nominal Voltage -24V, Nominal Capacity - 75Ah. Stored Energy-1.8Kw. Cycle@0.5C. 80%DOD 3000. Charge Voltage -29.2charge mode-CCCV. Standard charge current-15 amp. rapid charge current-37.5 standard I discharge current-15, max charge current- 75 amp, low voltage cutoff- 21.2. casing material- necessary suitable solar inverter / charge conttroller timing setting arrangement & necessary stand by arrangement for AC supply in case of rainy session • Alluminium. Terminal- MC4 connector, charge temp range-0-45C , Discharge temperature range 20-55 C. Storage temp - 20- 45C, Weight - 17Kg. (Non CSR) (5 Year Warrantee) (Approved By Superintending Engineer Nanded PWD Electrical Region Nanded No. 1970 /2023 Date :- 31/10/2023

Add GST 18%