Rural Development Department Tender

Providing and Laying open graded premix surfacing of 20 milimetre thickness composed of 13.2 milimetre to 5.6 milimetre aggregates premixed with bituminous binder, transported to site with vehicle tracking system, laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction, excluding prime / tack coat and seal coat. For Bitumen VG-30 bulk (Grade 60/70) - Using drum mix type hot mix plant with Supervisory Control and Data Acquisition, Paver and vibratory roller. (Over modified penetration macadam surface) Item / Page No : 12 / 33 Specification No : MORTH-501, 510, 511, 902, 903, 112, MORTH-503 Spec. Page No : 149-162, 198-205, 205-207, 417-421, 421-436, 19-21, 168-170 Additional Specifications : 1. The work shall be carried out in day time and in dry wheather. 2. The representative of contractor shall maintain a register giving details of challens for bitumen received and should get it signed from the representative incharge of the Department in token of its acceptance. 3. For controlling trafic and maintening diversion during construction, no extra payment shall be made.

Providing and Laying open graded premix surfacing of 20 milimetre thickness composed of 13.2 milimetre to 5.6 milimetre aggregates premixed with bituminous binder, transported to site with vehicle tracking system, laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction, excluding prime / tack coat and seal coat. For Bitumen VG-30 bulk (Grade 60/70) - Using drum mix type hot mix plant with Supervisory Control and Data Acquisition, Paver and vibratory roller. (Over balck topped surface) Item / Page No : 11 / 32 Specification No : MORTH-501, 510, 511, 902, 903, 112, MORTH-503 Spec. Page No : 149-162, 198-205, 205-207, 417-421, 421-436, 19-21, 168-170 Additional Specifications : 1. The work shall be carried out in day time and in dry wheather. 2. The representative of contractor shall maintain a register giving details of challens for bitumen received and should get it signed from the representative incharge of the Department in token of its acceptance. 3. For controlling trafic and maintening diversion during construction, no extra payment shall be made.

Providing bituminous type-A liquid seal coat on bituminous surface including supplying all materials and bitumen of VG-30 grade, preparing existing road surface, heating and applying bitumen at the rate of 0.98 kilogram per square metre by mechanical means, spreading chips and rolling by static roller having weight 8 to 10 metric tonne, excetra complete. Item / Page No : 1 / 32 Specification No : MORTH-511 Spec. Page No : 149-162, 205-207, 198-205, 417-421, 19-21 Additional Specifications : 1. The work shall be carried out in day time and in dry wheather. 2. The representative of contractor shall maintain a register giving details of challens for bitumen received and should get it signed from the representative incharge of the Department in token of its acceptance. 3. For controlling trafic and maintening diversion during construction, no extra payment shall be made.

Providing and laying cement concrete pipe confirming to Indian Standard 458:2003 non pressure class-2 of 450 milimetre diameter in proper line, level and slope including providng and fixing collars in cement mortar 1:2 and curing, excetra complete. Item / Page No : 8 / 62 Specification No : CD.7 Spec. Page No : 162

Providing and laying cement concrete pipe confirming to Indian Standard 458:2003 non pressure class-2 of 600 milimetre diameter in proper line, level and slope including providng and fixing collars in cement mortar 1:2 and curing, excetra complete. Item / Page No : 9 / 62 Specification No : CD.7 Spec. Page No : 162

Supplying hard murum / kankar at the road site, including conveying and stacking, excetra complete. Item / Page No : 29a / 24 Specification No : MORTH-408 Spec. Page No : 139-142

Spreading hard murum / soft murrum / gravel or kankar for side width, excetra complete. Item / Page No : 30 / 24 Specification No : MORTH-408 Spec. Page No : 139-142

Compacting the hard murum side widths including laying in layers on each side with vibratory roller including artificial watering, excetra complete. Item / Page No : 31 / 24 Specification No : MORTH-408 Spec. Page No : 139-142

Royalty charges for various building construction bonafied materials which are used for government bonafied works and for which Royalty charges are to be paid by the contractor. (This Item is to be paid to the contractor only after he pays the Royalty amount to Revenue department and produces the required voucher.) Item / Page No : 3 / 0 Additional Specifications : 1. Government of Maharashtra, Revenue and Forest Department Gazette Number 146 Dated 04/06/2021 and Government of Maharashtra Public Works Department State Schedule of Rates 2021-22 General Note Number A(v), Page 5. 2. The amount of royalty charges will be paid only after submission of the receipt in original from Revenue authority for payment of royalty to Government, stating the name of work. 3. Above / below percentage quoted by the contractor will not be applicable for this item.

Surcharge on Royalty charges at the rate of two percent of Royalty charges for various building construction bonafied materials which are used for government bonafied works and for which Royalty charges are to be paid by the contractor. (This Item is to be paid to the contractor only after he pays this Surcharge amount to Revenue department and produces the required voucher.) Item / Page No : 14 / 0 Additional Specifications : 1. Letter from the Chief Engineer, Public Works Region, Nagpur; bearing number Ka.Raste-6/Darsuchi/7618/2019 dated 11/09/2019 and Corrigendum number 1 attached to the letter. 2. The amount of surcharge on royalty charges will be paid only after submission of the receipt in original from Revenue authority for its payment to Government, stating the name of work. 3. Above / below percentage quoted by the contractor will not be applicable for this item.

Laboratory testing charges for various materials required for items of work, on the basis of testing frequency and charges fixed by Vigilence and Quality Control Circle, Pune. Item / Page No : 4 / 0 Additional Specifications : 1. The amount of the laboratory testing charges will be paid to the contractor after submission of the original receipt from the Office of the Vigilance and Quality Control with name of work mensioned on the original receipt within the stipulated period of work. 2. The frequency of tests will be as per the instructions of Vigilance and Quality Control, Pune; vide their letter No. Prasha/2647/ 2010 dated 30/10/2010. 3. No extra claim shall be entertained on account of additional tests required and material transportation charges for tests. 4. In addition to above, the conditions under clause 25 - Samples and Testing of Material, under 'Additional General Conditions and Specifications' of this tender document shall be applicable. 5. Above / below percentage quoted by the contractor will not be applicable for this item.Penetration, Softening Point, Flash and Fire Point, Specific Gravity for Asphalt VG-30 (Grade 60/70) 1 Test per 10.00 Metric Ton

Sieve Analysis Test for Metal 40 milimetre and above (Hand Broken) 1 Test per 100.00 Cubic Metre

Water Absorption, Specific Gravity, Impact Value, Crushing Value Test for Metal 40 milimetre and above (Hand Broken) 1 Test per Source

Sieve Analysis Test for Metal below 40 milimetre 1 Test per 100.00 Cubic Metre

Water Absorption, Specific Gravity, Impact Value, Crushing Value Test for Metal below 40 milimetre 1 Test per Source

Extraction Test for Mix Material 2 Test per 500.00 Cubic Metre

Sieve Analysis Test for Hard Murrm 1 Test per 100.00 Cubic Metre

Liquid Limit and Plastic Limit for Hard Murum 1 Test per 250.00 Cubic Metre

Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20 metre X 0.90 metre size made out 18 gauge (1.25 milimetre) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols excetra with approved colour shade paint complete, on M.S.angle of size 35 milimetre X 35 milimetre X 3 milimetre frame with properly cross braced mild steel angles of size 35 milimetre X 35 milimetre X 3 milimetre duly painted including two mild steel angle iron posts of size 65 milimetre X 65 milimetre X 6 milimetre, 3.65 metre long painted with alternate black and white bands of 25 centimetre width including all fixtures excetraand fixing the boards in 1:4:8 concrete block of size 60 centimetre X 60 centimetre X 75 centimetre including, excavation, refilling, transportation, and labour etc complete. Spec. number As directed by Engineer in Charge Item / Page No : 36 / 47 Specification No : MoRTH-801 Spec. Page No : --- Additional Specifications : The work shall be carried out as per instructions of Engineer in charge.