Rural Development Department Tender

Item No.4: Providing and fixing black kadappa stone as shelves 25mm. thick machine polished, extending the polish upto 20 cm width on lowerside, rounding corners, laying in position jointing with bedding cement mortar 1:4 proportion curing etc etc. complete. (SSR 2022-23 I.No. 33.23)

Item No.5: Providing internal cement plaster 20mm thick in Single coats in cement mortar 1:5 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete (SSR 2022-23 I.No. 32.06)

Item No.6: Supplying hard murum/ kankar at the road site, including conveying and stacking complete. (SSR 2022-23 I.No. 2.29a)

Item No.7: Spreading hard murum/ soft murrum/ gravel or kankar for side width complete (SSR 2022-23 I.No. 2.30)

Item No.8: Providing and fixing heavy duty inter locking concrete Coloured paving blocks of 60 mm thickness of having a strength of 300 Kilogram/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete (SSR 2022-23 I.No. 33.51)

Item No.9: Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, Steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) (SSR 2022-23 I.No. 24.08)

Item No.10: Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge (SSR 2022-23 I.No. 6.36)

Total Figure Amount

Item No.11: Charges for testing of material in vigilance & quality control laboratory For Concrete Compressive Strength OF C.C. Cube (Set of 3 cubes).

Item No.12: Charges for testing of material in vigilance & quality control laboratory For Concrete Paving Block. Compressive Strength, Water Absorption (Set Of 8 Blocks)

Item No.13: Royalty Charges b) For All Other Minerals = Royalty + surcharge (2%) = 211.95+4.23 = 216.18 per cum As per SSR 2022-23 Section V Page No.3

Total Figure Amount