Rural Development Department Tender

Excavation in Hard murum including boulders up to 0.60 m diameter ( 0.113 cum ) for canal, seating of embankment, filter drains/ catch water drains etc, and placing the excavated stuff neatly in dump area or for formation of service road/ embankment including cost of all materials, machinary, labour, dressing bed and sides to required level and profile etc. complete with lead up to 15 m and all lifts as directed.

Excavation in Soft Rock of all toughness by blasting including boulders above 0.6 m dia.(0.113Cum) minimizing damage to side slopes of excavation in water prism area by adopting any one or combination of line drilling /pre-splitting /smooth blasting techniques and placing the excavated rock neatly in approved dump area including cost of all materials, machinery, labour, leveling bed etc., complete with lead up to 15 m and all lifts as directed.

Excavation in Hard-Rock of all thoughness by blasting including boulders above 0.60 mtr. diameter (0.113 cum) minimising damage to side slope of excavation in waer prism area by adpoptig any one or combination of line drilling / pre-spilting / smooth blasting techniques and placing the excavated rock neatly in approved dump area as directed including cost of all materials, machinery, labor, leveling bed etc. complete with all lead and lift.

Providing and laying in situ cement concrete of grade M-15 of trap / granite / gneiss / quartzite / graded metal (40 MSA.) for PCC with or without surface reinforcement / RCC concreting requiringheavyor specialtypeof shuttering for works of gallery, sluice, spillway crest, spillway downstream face, energy dissipating structures, intake structures, training walls, piers, abutments etc. with Concrete Mixer considering lead of 50 m with shuttering and scaffolding, placing, compacting, curing etc. complete with an initial lead of 50 m. & lift of 1.5 m

Providing & fixing deformed cold twisted (TMT )steel surface reinforcement bar of various size as per design and drawing including cutting, bending, hooking binding with G.I. wire placing at desire location including cost of binding wire as directed with all lead & lifts etc completed.as per specification (Rates as per Joint Plant Committee) for 10 mm

Back filling up to ground level behind the canal structures etc. complete (without royalty) with suitable material of approved quality in layers not exceeding 20 cm without disturbing the structure etc. complete.

Providing and fixing bar of 25mm dia. 3.375 m length with resin bond cement capsule anchorage through shaft including drill holes, inserting grout capsule, driving anchor, cost of all materials, machinery, labour, ventilation, lighting, drainage and other ancillary operations etc. complete with all lifts as directed

Providing and fixing canal information board of 1.20 x 0.75 m prepared on 16 gauge M.S. sheet with angle iron frame of size 35 X 35 X 3 mm with cross bracing of size 25 X 25 X 3 mm including painting with one coat of zinc chromate storing primer and two coats each of green/white back ground and back side grey store enamelledbondedwith redretroreflective sheet Engineering grade, border / letters / numeral / arrows coated with non pealable crystal clear protective transparent coat retaining 100% reflection including two angle iron post of size 50X50X5 mm of 3.65 m long inflated at bottom drilled on top and painted in white and black bonds of 30 cm with four numbers high strength of G.I. bolts and nuts of size 10 mm dia. and 20 mm long sheet and angle iron post in one piece without joints including all taxes, conveying, fixing in ground with cement concrete in M-15 block of size 60 X 60 X 75 cm as directed by engineer-in- charge.

Royalty not included in rates

GST(18%)

GIS(1%)