Rural Development Department Tender

Providing SAND FACED PLASTER externally in cement mortor mortor using good sand in all positions including base coat of 15 mm thick in cm1;4 using water proffing compound at 1kg per cement bag curin the same for not less than 2 days and keeping the surface. (SPEC NO.BDL.7.PAGE NO.369) SSR P NO.153/ I NO.32.11 SSR 2022-23 P.No 257*32.11

Providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting fixing in position, Making riveted/ bolted/ welded connection and one coat of anticorrosive paint and over it 2 coats of oil painting approved quality and shade etc. complete.(Bd.C.8 Page No.278) SSR P.NO.129 I NO.23.04 SSR 2022-23 P.No 212*23.04

Removing G.I. or A.C. sheet roofing including purlins, principal rafters etc. including sorting serviceable and unserviceable materials, stacking the same as and where directed in the compound including scaffolding etc. complete.As directed by Engineer in charge .SSR P NO 173. I NO .38.26 SSR 2022-23 P.No 289*38.26

Providing and fixing colour coated Zincalume ( R ) AZ150 ( min 150gms/sq.mt. total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyester paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180- 250 mm center-to-center. The end rib shall be designed for anticapillary groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 kg/sqm)As directed by Engineer in charge Bd.R. SSR P.NO.173. I.NO.38.34 SSR 2022-23 P.No 291*38.34

Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete.complete. SSR 2022-23 P.No/I.No.370* 46.19

Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) Spec. No. Bd. E. 1 Page No. 287 SSR 2022-23 P.No./I.no. 215*24.01

Providing and laying Polished Shahabad Stone flooring 25mm to 30mm thick and required width wide in plain/diamond pattern on a bed of 1:6 C.M. including cement float,filling joints,with neat cement slurry,curing,polishing and cleaning etc.complet SSR 2022-23 P.No./I.no. 261*33.04

Removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete.As directed by Engineer in charge. SSR 2022-23 P.No 370*46.15

Item No. :-Providing and fixing double leaf steel door without ventilator including shutter of M.S. frame of angle 50 x 50 x 6 mm and shutter frame of 30 x 30 x 6 mm and shutter sheet of 10 guage of approved quality with hold fast , necessary fixture and fastening with oil painting three coats including primer coat complete as per detailed drawings and as directed complete. SSR 2022-23 P.No Rate as per Rate Analysis.

Item No. :-Providing and fixing steel window of various sizes as per detailed design and drawings without ventilator and steel frame of angle 40 x 40 x 5 mm and shutter frame of angle 25x 25 x 5 mm fixture and fastening with oil painting three coats including primer coat complete as per detailed drawings and as directed complete.(including M.S. guard bars of 12 mm dia. at 10 cm c/c and M.S. flat of 40 x 6 mm) SSR 2022-23 P.No Rate as per Rate Analysis.

Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete.(Specificationas directed by Engg. Incharge) SSR 2022-23 P.No 260*32.34

Providing and applying washable OIL BOUND DISTENPER of approved colour and shade to old & new surface in Two coats including scaffolding preparing the surfaces etc, complete. (SPEC.NO.BDP.5.A.PAGE.NO.413)SSR P NO.292 I NO.36.11 SSR 2022-23 P.No 280*36.11

Providing applying two coats of WATER PROOF CEMENT PAINT of approved manufacture & of approved colour to the plastered surfaces including scaffolding if necessary cleaning and preparing the surfaces watering for two days complete.(SPEC.NO.BDO.8.P NO.406)SSR P NO 289 /I NO.35.13 SSR 2022-23 P.No.276*35.13

Royalty Charges

Testing of Materials

1 % Cess/Labour For Insurance

CGST 9 %

SGST 9 %