Rural Development Department Tender

ITEM NO. : 4 Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete....(INo27-05, PgNo 197) (STATE SSR) Item Spec: (Bd.G.5 Page No. 315) RA NO.: 3

ITEM NO. : 5 Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.....(INo32-11, PgNo 209) (STATE SSR) Item Spec: (Bd.L.7 Page No. 369) RA NO.: 4

ITEM NO.: 6 Providing flush grooved pointing with cement mortar 1:3 for stone masonry work including scaffolding and curing etc. complete.....(INo32-17, PgNo 210) (STATE SSR ) Item Spec: (Bd. L.15 Page No. 372) RA NO. : 5

ITEM NO.: 7 Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15cm. to 20cm. including watering and compaction etc. complete.....(INo21-37, PgNo 157) (STATE SSR) Item Spec: (Bd.A.11 Page No. 263) RA NO.: 6

ITEM NO. : 8 Providing and fixing heavy duty inter locking concrete RUBBER MOULD GLOSSY PAVING BLOCKS of 60 millimeter thickness of having a strength of 400 Kg/sq.m of approved quality and shape on a bed of crushed sand of 25 to 30 millimeter thick including striking joints an cleaning etc. complete. (using 100% crushed sand)....(INo33-53, PgNo 219) (STATE SSR) Item Spec: (Bd. M-12 page No. 385)

ITEM NO. : 9 Providing and applying priming coat on concrete/masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete.....(INo35-21, PgNo 225) (STATE SSR) Item Spec: (As directed by Engineer in charge.)

ITEM NO. : 10 Providing and applying two coats of exterior white weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface,applying primer coat ,scaffolding if necessary, and watering the surface for two days etc complete. NOTE: For Item No. 15 to 18 prior approval of Superintending Engineer will be necessary....(INo35-26, PgNo 225) ( Spec: (As directed by Engineer in charge.) (STATE SSR) Item

ITEM NO.: 11 Providing and fixing mild steel grill gate as per the detailed drawing including hinges, locking arrangements and painting in three coats of oil paint of approved colour and shade etc. complete. (weight 18 kg. to 20 kg. Per Sq.m.) Spec.No.: As directed by Engineer- in-charge.....(INo23-09, PgNo 174) (STATE SSR) Item Spec: (Spec. No. As directed byEngineer in Charge.)

ITEM NO.: 12 Low Height Openable Storage @ 900Lx450x750HT Providing and fixing Openable Steel Storage of 900 x 450 x 750Ht, with 2 adjustable shelves, Complete body & shutter made in 0.8 mm thick & Top in 2 mm thick CRCA, 2 Shutter to be mounted with the help of cup hinges, and 4 adjustable levelers, enitre storage in powder coated finish with 60 to 80 microns. with 25 mm. thk additional Top on top of storage as as per drawing....(INo51-35, PgNo 358) (STATE SSR) Item Spec: (As directed by Engineer -in- Charge)

ITEM NO.: 13 Credestal @ 1200L * 450L * 650HT Providing & Fixing of LOW HEIGHT CREDESTAL @ 1200L X 450D X 650H: To be made out of Membrane Finish (2 Openable Shutter & 3 Drawer Pedestal in between )as per drawing....(INo51-23, PgNo 355) (STATE SSR) Item Spec: (As directed by Engineer -in- Charge)

ITEM NO. : 14 Conference Table @ 3600Lx1400Dx750HT Providing & Fixing of Main Table @ 3600Lx1400Dx750HT -made up of 18+18mm Thick MDF top with PVC Membrane finish and waterfall edge profile. Aluminium Anodizied finish beeding of 4mm thich is running all over the table top edge. Gable ends is Aerofoiled Shape with front edges in PVC Membrane finish and rest in Prelaminated MDF with batton structure. Gable ends should be hollow from inside for the provision of passing electrical and Data wiring., MODESTY PANEL:- to be made of 18 mm thick Prelaminated particle board with PVC edge band Access Flap:- For Wire manager 2 Nos.....(INo51-31, PgNo 357) (STATE SSR) Item Spec: (As directed by Engineer -in- Charge)

ITEM NO.: 15 Providing & Arrangemnt of High Back Chair - TILT MECHANISM WITH MULTILOCKING, HIGH DENSITY CUSHION ON SEAT COMPOSITE LEATHER WITH METALLIC SILVER FINISH BASE AND ARMS WITH P.U.CASTORS GASLIFT FOR HEIGHT ADJUSTMENT.....(INo51-41, PgNo 359) (STATE SSR) Item Spec: (As directed by Engineer -in- Charge)

ITEM NO.: 16 Providing & Arrangemnt of MId Back, Normal Syncro Mechanism, Fixed Armrest, Gaslift for Seat height adjustment, Standard 5-prong/Nylon Base with Leather Upholstery....(INo51-42, PgNo 359) (STATE SSR) Item Spec: (As directed by Engineer -in- Charge)

ITEM NO.: 17 Providing & fixing Sofa Set 3+1+1 Brown and Cream leather DIMENSION Length: 182.5 (cms) Breadth (cms): 100 (cms)Height (cms): 100 (cms) Weight (kgs): 66 (Kg) Seating Capacity: Five Seat....(INo51-53, PgNo 366) (STATE SSR) Item Spec: (As directed by Engineer -in- Charge)

ITEM NO.: 18 Providing and fixing frame work of anodised aluminium sections for suspended false ceiling consisting of aluminium T 50 mm x 40 mm weighing 0.39 kg/m. at 60 cms c/c & fixed with (15 * 15mm) flanges weighing 0.119 kg/m suspended on 6 mm dia. mild steel rod weighing 0.22 kg/m fixed on wall and beams including rounding of the edges with aluminium T of 50mm * 40mm weighing 0.39 kg/m etc. including all labour etc. complete.....(INo38-14, PgNo 234) ( STATE SSR) Item Spec: (As directed by Engineer in charge.)

ITEM NO.: 19 Providing and fixing false ceiling of 10 to 12 mm thick decorative boards of fibrous plaster of paris including scaffolding if necessary all architectural work like mouldings, cornices, coves, domes, cups as per detailed drawings and three coats of spray painting to boards etc. complete. (excluding frame work, runners and mild steel suspenders).....(INo38-17, PgNo 235) ( STATE SSR) Item Spec: (As directed by Engineer in charge.)

ITEM NO.: 20 Providing and fixing 20 mm thick superior veneer board pelmet box 150 to 200 mm wide to doors or window frames including 20mm dia. Aluminium curtain rod with sockets and finishing with french polishing (without top)etc. complete.....(INo37-14, PgNo 231) (STATE SSR) Item Spec: (As directed by Engineer- in-charge.)

ITEM NO. : 21 Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border /messages/symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge.... (INo6-36, PgNo 60) ( STATE SSR) Item Spec: (MORTH 801)

TESTING CHARGES

TOTAL AMOUNT FOR SUB WORK NO.3