Rural Development Department Tender

Providing and laying cement concrete pipe of IS 458:2003 NP-2 class of 600mm diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete. (Item No.11.09)

Watering and compacting of embankment formed of materials obtained from the road cutting within a lead of 50 m, not less than 97% of standard Proctor density after laying them in layers of 20 cm. to 30 cm. with Power roller (Item No.2.24)

Supplying trap/granite/quartzite/gneiss stone metal of required size by bringing the boulders / Rubble at the road side breaking them to required gradation including conveying the boulders /Rubble and stacking the broken metal etc. complete . (Prior approval of sample stack of broken metal by the Ex. Engineer is necessary the date of approval will form part of the measurements) a)80 mm Metal, By breaking Boulders (Hand broken). (Item No.50.56)

Supplying trap/granite/quartzite/gneiss stone metal of required size by bringing the boulders / Rubble at the road side breaking them to required gradation including conveying the boulders /Rubble and stacking the broken metal etc. complete . (Prior approval of sample stack of broken metal by the Ex. Engineer is necessary the date of approval will form part of the measurements) a)40 mm Metal, By breaking Boulders (Hand broken). (Item No.50.57)

Supplying hard murum/ kankar at the road site, including conveying and stacking complete. (Item No.2.29a)

Supplying soft murum at the road side, including conveying and stacking complete. (Item No.2.29b)

Spreading 80/40 mm metal for road work including sectionong etc complete as directed by Engineer in charge .(Item No.50.58)

Spreading hard murum/ soft murrum/ gravel or kankar for side width complete (Item No.2.30)

Compacting the hard murum side widths including laying in layers on each side with vibratory roller including artificial watering etc. complete.(Item No.2.31)

Compacting the sub grade / gravel / size metal (200 mm loose) layers for all widths with Power roller having weight 8 to 10 MT. including necessary, labour, materials and artificial watering complete. (Item No.50.59)

Compacting the sub grade / gravel / size metal (100 mm loose) layers for all widths with Power roller having weight 8 to 10 MT. including necessary, labour, materials and artificial watering complete. (Item No.50.61)

Providing dry rubble stone pitching 23cm (about 9) thick including all material, quarry spalls, labour etc. complete. (Item No.2.34)

Providing and fixing Road junction / Information sign board of size 0.90 m x 0.60 m. prepared on 16 gauge M.S. sheet with angle iron frame of size 35x35x5 mm including painting with one coat of zinc cromate stoving primer and two coats each of green/ white back ground and back side gray stove enamelled, bonded with red retro reflective sheet Engineering grade, border / letters / numeral / arrows, coated with non pealable crystal clear protective coat retaining 100% reflection including two angle iron post of size 50x50x5 mm of 3.65 m. long inflated at bottom drilled on top and painted in white and black bands of 30 cm. with 4 Nos. high strength G.I. bolts and nuts of size 10 mm dia. and 20 mm long sheet and angle iron post in one piece without joints including all taxes, conveying, fixing in ground with cement concrete 1:4:8 block of 60 cm x 60 cm x 75 cm size as directed by Engineer-in-charge etc. complete. Mild Steel Board with Engineering Grade. (Item No.6.47)

Total Royalty Charges For Metal & Murum

Test For 80 mm Metal (Water Absorption, Specific Gravity,Impact Value, Crushing Value)

Test For 80 mm Metal (Sieve Analysis.)

Test For 40 mm Metal (Water Absorption, Specific Gravity,Impact Value, Crushing Value)

Test For 40 mm Metal (Sieve Analysis.)

Test For Soft Murum (Liquid limit & plastic Limit.)

Test For Hard Murum (Sieve Analysis.)