Rural Development Department Tender

Providing and casting in situ C.C. of trap/granite/ quartzite/gneiss metal of approved quality for RCC work as per detailed by Engineer-in-charge including normal dewatering, centering, formwork, compaction, finishing the formed surfaces with CM 1:3 of sufficient minimum thickness to give a smooth and even surface wherever necessary and curing, etc complete. ((By weigh batching and mix design for M-250 ad M- 300 only. Use of L & T, A.C.C. Ambuja, Birla Gold, Manikgad, Rajashree, etc cement is permitted. Excluding M.S. or TOR reinforcement) in RCC M-200. For Raft

Providing and casting in situ C.C. of trap/granite/ quartzite/gneiss metal of approved quality for RCC work as per detailed by Engineer-in-charge including normal dewatering, centering, formwork, compaction, finishing the formed surfaces with CM 1:3 of sufficient minimum thickness to give a smooth and even surface wherever necessary and curing, etc complete. ((By weigh batching and mix design for M-250 ad M- 300 only. Use of L & T, A.C.C. Ambuja, Birla Gold, Manikgad, Rajashree, etc cement is permitted. Excluding M.S. or TOR reinforcement) For RCC M - 20 grade- For Wall. & Slab

Providing and fixing in position steel bar reinforcement in position steel bar reinforcement of various diameters for R.C.C. Piles, caps, footings, foundatio-ns, slabs, beams, columns, canopies, staircases, newels, chajjas, lintels, pardies, copints, fins, drawings, and schedules, including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required etc. complete.

Providing, erecting, connecting double flanges short body pattern type manually operated Butterfly valve having body, disc and end cover in graded cast iron to IS 210 Gr. CF 200 generally conforming in BS 5155, synthetic rubber faced ring secured on disc by retaining ring with stainless steel screw stub shaft of stainless steel riding in teflon bearings excluding C.C. foundation/ structural steel support confirming to IS 13095-1991 80 mm Sluice valves - PN - 1.

Lowering, laying and jointing in position following C.I. D/F Reflux vales, Buttefly valves and sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete (Rate for all class of valves).80 mm dia. CIDF Sluice Valve PN-1

Dewatering the excavated trenches and pools of water in Sthe building trenches/pipeline trenches, well works by using pumps and other devices including disposing off the water to safe distance as directed by Engineer-in-charge etc. complete.

Sub Work No 2 :- Gravity Main Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distace of 50 metres and lifts as below, stackig and spreading as directed, normal dewatering, preparing the bed for foundation and excluding, backfilling, etc. complete.

Excavation for foundation / pipe trenches in hard murum and boulders,W.B.M.road including removing the excavated materials upto distance of 50 m Beyond the area & lift as below stacking and spreading as directed by Engg. in charge normal dewatering preparing the bed for foundation and excluding backfilling etc. complete.,

Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyond area and lifts as below, stacking as directed by Engineer-in-charges, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. Lift 0 to 1.5 M

Excavation for foundation / pipe trenches in hard rock and concrete road by chiselling, wedging, line drilling, by machnial means or by all means other than blasting including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the area and lifts as below, stacking as directed by Engineer-in-charge, normal dewatering, excluding backfilling, etc. complete.by all means.

Filling in plinth ad floors murum bedding in trenches with approved murum from excavated materials from foundation 15 cm. to 20 cm. layers including watering ad compaction complete.

Providing and supplying in standard lengths Polyethelene Pipes, confirming to IS 4984 / 14151 / 10786 / 13488 with nesessary jointing material like mechanical connector i. e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint, including all statutary duties and taxes such as GST levied by Gol and GoM in all respect, transportation and fright charges inspection charges, loading / unloading charges, conveyance to the departmental stores / site & stacking the same in closed shade duly protecting from sunrays & rains, etc. complete. 90 mm dia HDPE 6 Kg/cm2

Hydraulic testing of PVC pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position.

Providing ISI mark G.I. pipe of following class and dia.excluding GST levied by GOI and GOM in all respect including inspection charges, transportation to stores, etc. Complete as per IS-1239/2004. 80 mm dia GI Pipe Medium

Providing double flange sluice valve confirming for IS-14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading,stacking excluding GST levied by GOI & GOM in all respect etc. complete. 80 mm Sluice valves - PN - 1

Providing and supplying Air Valves as per IS-14845 and MJP’s standard specifications double orifice type combined with screw down isolating valve, small orifice elastic ball resting on a gun metal orifice nipple, large orifice vulcanite ball seating on moulded seat ring, inlet face and drilled, including insurance,third party inspection charges, loading, unloading,transportation upto departmental stores, excluding GST levied by GOI & GOM in all respect etc. complete. 25 mm Dia. PN - 1

Lowering, Laying and Jointing H. D. P. E. pipes by heating to the ends of pipes with the help of tefflon coated electric mirror / heater to the required temparature and then pressing the ends together against each other, to form a monolithic & leak proof joint by thermosetting process. The pressing may be required to be done with Jacks/ Hydraulic Jacks/Butt fusion machine etc. complete with all materials labours as directed by Engineer - in - charge. to be corrected including Hydrulic testing etc.complete 90 mm dia HDPE 6 Kg/cm2

Lowering, laying and jointing G. I. pipes and specials of following class and diameter including conveyance from stores to site of works, all labour etc. complete either underground or in vertical position, as directed by Engineer-in-charge Hydraulic testing of G. I. pipe line to specified pressure including cost of all materials and labour and water for testing for the length upto 1km using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour operation charges etc. required for testing, The rates under this item shall also include cost of retesting if necessary and reinstating to original postion. 80 mm dia GI Pipe Medium

Lowering, laying and jointing in position following C.I. D/F Reflux vales, Buttefly valves and sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete (Rate for all class of valves)Giving satisfactory Hydraulic testing of following C.I.D./F Reflux valves,Butterfly valves and Sluice Valves. 80 mm dia

Lowering, laying and fixing in proper alignment and position all types of C.I. air valves as directed by Engineer-in-charge including cost of conveyance from stores to site of work, cost of all material and giving satisfactory hydraulic testing, etc. complete. (for all class of valves). 25 mm dia single ball

Providing and supplying of Electro Fusion Fittings in accordance with BNS EN12201 Part-3 suitable for drinking water with in black/blue colour manufactur-ed from compounded PE80/ PE100 virgin polymer and compatible with PE80/ PE100 pipes in pressure rating SDR11 with min. PIN12.5 rated for water application and shall be inclusive of all cost such as testing, all the taxes related to central, state & municipal, inspection charges, transportion, insurance, loading, unloading, stacking etc, complete. Coupler 90 mm

End cap 90 mm

Tee 90 mm

Elbow 45 degree 90 mm

LNPE ( Tail Pieces) 90 mm

Refilling the trenches with available excavated stuff with soft material first over pipe line and then hard material I 15 cm. layers with all leads and lifts including consolidation, surcharging, etc. complete.

Providing and laying in situ Cement Concrete M-15 of trap/ granite / quartzite / gneiss metal for foundation and bedding including bailing out water, form work, compaction, curing, etc. complete.

Providing and supplying ISI standard MS specials of required thickness with 3 coats of approved make epoxy paint (Shalimar, Ciba or Mahindra & Mahindra make)from inside and outside excluding GST levied by GOI & GOM in all respect including inspection charges, transportation to stores and stacking, etc. complete.

Subwork No 3 :- R.C.C.G.S.R Providing  and in situ  Cement Concrete M-15 of trap/ granite I quartzite I gneiss metal for foundation   and bedding including bailing out water, form work, compaction, curing, etc. complete.

Providing uncoursed rubble masonry of trap /granite / quartzite / gneiss stones in cement mortar 1:6 in foundation and plinth of in ner walls / in plinth of external walls including bailing out water manually , striking joints on un exposed faces and watering etc.complete.

Designing and constructing RCC Ground Service Reservoirs in M300 mix of required capacity including excavation in all types of strata, foundation concrete, container walls, bottom slab, top RCC roof slab or dome, 20 mm thick cement plaster with water proofing compound in CM 1:3 proportion to inside face of the container including refilling and disposing off the surplus stuff within a lead of 50 m. all labour and material charges for laying and jointing of pipe assembly for inlet, outlet, washout, overflow and bye-pass arrangement consisting of C.I./M.S.D/F. pipes, specials and valves of given diameters, providing and fixing accessories such as M.S. ladder inside and outside, C.I., C.I. manhole frame and covers top slab, B.B. masonry chamber for all valves, ventilating shafts, indicating giving satisfactory hydraulic test and water tightness test as per IS code and providing three coat of cement paints to all expose surface of structure includiung roof surface etc. complete as per design data, criteria, obligatory requirements and detailed specifications. RCC GSR Cap- 40,000 Lit Notes :- 1) The design shall be in accordance with various relevant l.S. specification (l.S. 456/1978, l.S. 875 - 1987, l.S. 3370 -1965 or revised. 2) Only M.S. bars grade I conforming to l.S. 432 part-I or high yield strength deformed bars conforming to l.S. 1786 or l.S. 1139 shall be used. Grade -II M.S. bars shall not be used. 3) Entire structure shall be in M-300 onlv. 4) The scope of pipe assembly work shall be upto 5 metre beyond outside face of the wall, cost of pipes valves and specials is not included in the rate but labour cost for laying and jointing is included. 5) The G.S.R. I Sump above 15 lakh litres capacity shall be in two compartment. 6) The Job includes designing the structure for uplift pressure and dewatering if required during entire execution and disposal of surplus excavated stuff within lead of 50 metres as directed by Engineer- in-charge. If uplifts considered in design, then these rates shall be increased by 7.5%. 7) G.S.R. outlets shall be with bell mouth of approved pattern in bottom slab and cost of designing bell mouth is included in the rate. Sump well includes cost of suction pit required at bottom. 8) For pipe diameters upto 300 mm only Cl pipes and Cl specials shall be used. For pipe diameters above 300 mm, M.S. pipes and specials minimum 10 mm thick shall be used with proper anticorrosive epoxy treatment from inside and outside. 9) Cost of pump house is not included in these rates. 10) Above rates are applicable for Seismic Zones 2 3 and 4. 11) 75% part rate shall be payable for reinforcement, concrete and plastering items of all types of G.S.R.s and sumps till satisfactory hydraulic testing for water tightness test is given and till that work shall be treated as incomplete. Note : Conditions from Sr. No. 1 to 11 shall form a part and parcel of tender and must be included in the draft tender papers for work of R.C.C. GSRs and sumos.

Providing ISI mark G.I. pipe of following class and dia. excluding GST levied by GOI and GOM in all respect including inspection charges, transportation to stores, etc. complete as per IS-1239/2004. a) 80 mm dia G.I Medium Class

Providing double flange sluice valve confirming for IS-14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete. a) 80 mm dia Sluice Valve

Providing and supplying ISI standard MS specials of required thickness with 3 coats of approved make epoxy paint ( Shalimar,Ciba or Mahindra and Mahindra make ) from inside and outside excluding GST levied by GOI & GOM in all respect including inspection charges, transportation to stores / site, and stacking, etc. complete.

Subwork No 5 :- Distribution system ( Extension) Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distace of 50 metres and lifts as below, stackig and spreading as directed, normal dewatering, preparing the bed for foundation and excluding, backfilling, etc. complete.

Excavation for foundation / pipe trenches in hard murum and boulders,W.B.M.road including removing the excavated materials upto distance of 50 m Beyond the area & lift as below stacking and spreading as directed by Engg. in charge normal dewatering preparing the bed for foundation and excluding backfilling etc. complete.,

Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyond area and lifts as below, stacking as directed by Engineer-in-charges, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. Lift 0 to 1.5 M

Excavation for foundation / pipe trenches in hard rock and concrete road by chiselling, wedging, line drilling, by machnial means or by all means other than blasting including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the area and lifts as below, stacking as directed by Engineer-in-charge, normal dewatering, excluding backfilling, etc. complete.by all means.

Filling in plinth ad floors murum bedding in trenches with approved murum from excavated materials from foundation 15 cm. to 20 cm. layers including watering ad compaction complete.

Providing and supplying in standard lengths ISI mark rigid unplasticised PVC pipes suitable for potable water with solvent cement joints including cost of couplers, as per IS specification no. 4985 / 1988 excluding GST levied by GOI and GOM in all respect, including transportation, freight charges, inspection charges, loading, unloading, conveyance to the departmental stores and stacking the same in closed shed duly protected from sun rays and rains including cost of jointing material i.e. solvent cement, etc. complete (selffit type to be jointed with cement solvent). Working Pressure 4 Kg./Sq.cm 75 mm dia PVC 4 Kg/cm2

Providing ISI mark G.I. pipe of following class and dia. excluding GST levied by GOI and GOM in all respect in- cluding inspection charges, transportation to stores, etc. complete 65 mm dia GI Pipe Medium

Providing double flange sluice valve confirming for IS-14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading,stacking excluding GST levied by GOI & GOM in all respect etc. complete. 65 mm dia PN 1

Lowering, laying and jointing with P.V.C. pipes and specials of following class and diameter including cost of conveyance from stores to site of works including cost of all labour, material, except cement solvent, rubber ring, , etc. complete (With cement solvent joint / ring fit joint). Hydraulic testing of PVC pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour,operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position. working Pressure 4 Kg/Sqcm. 75 mm dia PVC 4 Kg/cm2

Lowering, laying and jointing G. I. pipes and specials of following class and diameter including conveyance from stores to site of works, all labour etc. complete either underground or in vertical position, as directed by Engineer-in-charge Hydraulic testing of G. I. pipe line to specified pressure including cost of all materials and labour and water for testing for the length upto 1km using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour operation charges etc. required for testing, The rates under this item shall also include cost of retesting if necessary and reinstating to original postion. 65 mm dia GI Pipe Medium

Lowering, laying and jointing in position following C.I. D/F Reflux vales, Buttefly valves and sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete Giving satisfactory Hydraulic testing of following C.I.D./F Reflux valves,Butterfly valves and Sluice Valves.(Rate for all class of valves). 65 mm dia PN 1

Providing ISI standard R.C.C. pipes in standard lengths of following class and diameter suitable for either collar joints or rubber ring joints, excluding GST levied by GOI & GOM in all respect including inspection charges, transport to departmental stores, unloading and stacking etc. complete as per IS-458/1988. For Casing Collar joints class NP - III, 200 mm

Lowering, laying and jointing in proper grade and alignment R.C.C. pipes with collar joints in C.M.1:1 proportion or socketed R.C.C. pipes with rubber joints (excluding cost of rubber ring or R.C.C. collar,) including cost of conveyance from stores to site of work, cost of jointing material, labour, giving hydraulic testing etc. complete as directed by Engineer-in-charge (For all class of pipes.) Collar joints class NP - III, 200 mm

Providing and constructing B.B. masonry valve chamber with 15 cm thick 1:3:6 proportion PCC bedding, excluding excavation, B.B. masonry in CM 1:5 proportion precast RCC frame and cover, etc. complete as directed by Engineer-in-charge. As above of 0.90 x 0.60 m internal size depth upto 1.2 m with precast RCC slab cover

Providing and fixing C.I. road box including loading, unloading and carting to site of work including all necessary excavation in all types of strata and fixing in murum packing, etc. complete. 100 mm x 225 mm (20 kg)

Providing & laying in situ M-150 grade of CC of trap/granite/quartzite/gneiss metal for foundation & bedding including bailing out water ,formwork compacting & curing finishing etc. complete.

Refilling the trenches with available excavated stuff with soft material first over pipe line and then hard material I 15 cm. layers with all leads and lifts including consolidation, surcharging, etc. complete.

Providing and supplying ISI standard MS specials of required thickness with 3 coats of approved make epoxy paint (Shalimar, Ciba or Mahindra & Mahindra make)from inside and outside excluding GST levied by GOI & GOM in all respect including inspection charges, transportation to stores and stacking, etc. complete.

Subwork No 4 :- RUNNING THE SCHEME (FOR ONE MONTH) Commissioning, running and maintaining the scheme to quantities, rated capacity, including manning necessary personnel such as operator, valveman, etc. as per requirements of the scheme and who should also administer chemical dose for a period of 1 month for individual scheme and 3 months for regional scheme, together with training of personnel spared by MJP / Local Body and handing over the scheme to Local Body after completion of the above period as directed by Engineer-in-charge. Note : Required chemicals to be supplied by Department free of cost and electricity bill will also be paid by the Department. a) For single village ( One Month ).

Add GST 12%