Rural Development Department Tender

Providing and laying POLISHED SHAHABAD STONE Flooring 25 to 30 mm thick &30 cm wide requried width in plain and diamaind pattren on a bed of 1:6 cm including cement float filling joints with neat cement slurry pointing in cement mortor in 1:3 curing ,polishing and cleaning etc. complete. (SPEC NO.BDM.3.A.PAGE NO.380)SSR P NO.275 / I NO.33.04 SSR Item No. : 33.01 BD.M. 1Page No. 265

Dismenting brick masonry in time or cement mortor and stacking the materials as directed with all leads lifts complete . Spec. As directed by Engineer in charge. SSR P NO 375 I NO .46.09

Providing Bricks masonry in cement mortar 1:6 using ____ bricks in superstructure including striking joints, raking out joints, watering and scaffolding complete. SSR Item No. : 27.05 BD.G.5 Page No. 246

Providing and fabricating structural steel work in tubular/rectangular/hollow steel structure of standard size as per detailed designs and drawing including fixing in position without connecting plates, braces etc. and one coat of anticorrosive paint and over it two coats of oil paintings of approved quality and shade complete. SSR Item No. : 23.04 BD.C.8 Page No. 214

Providing and fixing colour coated Zincalume ( R ) AZ150 ( min 150 gms/sq.mt. total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyester paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm center- to-center. The end rib shall be designed for anti-capillary groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 Kilogram/Square Metre)SSR Item No. : 38.34 BD.R.5 Page No. 303

Providing internal cement plaster 12mm thick in Single coat since mentmortar 1:5 without neeru finish, to concrete ,brick surface, in all positions including scaffolding and curing etc. complete. Bd.L.4 Page No. 368 SSRPage no.270 Item no.32.06

Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:3 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete.32.02 Bd.L.1 Page One Number 367

Providing SAND FASED PLASTER externally in cement mortor mortor using good sand in all positions including base coat of 15 mm thick in cm1;4 using water proffing compound at 1kg per cement bag curin the same for not less than 2 days and keeping the surface.

Providing and applying washable OIL BOUND DISTENPER of approved colour and shade to old & new surface in Two coats including scaffolding preparing the surfaces etc, complete. (SPEC.NO.BDP.5.A.PAGE.NO.413)SSR P NO.292 I NO.36.11

Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to old plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete. SSR 2022-23 P.No. 281 Item Code 35.14

Providing and laying damp proof course 50 mm thick in M20 cement concrete layer and bitumen / using cement with waterproofing compound curing, formwork etc. complete.Bd.J.2 Page No.355 SSR P NO 265 /I NO.31.01

Removing Steel doors & windows includingstacking the material as directed with all leads & lifts etc. complete. SSR Item No. : 46.15 BD.W.-8 Page No. 371

Providing and fixing double leaf STEEL DOOR without ventilator including M.S.Sheet Shutter of 20 gauge, door frame of cold frame angle of 25x25x5 mm M.S Support angle of 25x15x5 approved quality hold fast necessary fixtures and fastenings painting with oil paint three coats and primre etc. complete as per detailed drawing or as directed as per Rate Analysis. SSR Item No. : 39.19 BD.T.53 Page No. 309

Providing and fixing STEEL WINDOWS with out ventilators including M.S.Shutter of 20 gauge windows frame of cold pressed steel sheet of size 100x60x1.25 mm , shutter frame Angle of 25x25x5 mm M.S.Support angle of 25x15x5 mm M.S.Guard bars of 12 mm square approved quality hold fast necessary fixitures and fastenening painting with oil paint three coats and primer etc. complete as per detailed drawings or as directed.(As per Rate Analysis)

Rain Water Harvesting

Item No.16 : Royalty Charges

Item No.17 : Testing of Materials

Item No.18 : 1 % Cess/Labour For Insurance

Item No.19 : CGST 9 %

Item No.20 : SGST 9 %