Rural Development Department Tender

for Sathe nagar

Supplying 6 MM Metalat the road site, including conveying and stacking complete

for Sathe nagar

Spreading 80/40 mm metal for road work including sectionong etc complete as directed by Engineer in charge .

for Sathe nagar

Spreading hard murum/ soft murrum/ gravel or kankar for side width complete

for Sathe nagar

Providing and fixing heavy duty inter locking concrete Coloured paving blocks of 60 mm thickness of having a strength of 300 kg/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete

for Sathe nagar

Providing and laying Cast in situ/Ready Mix cement concrete M-15 of trap/ granite/quartzite/gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/ steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)

for Sathe nagar

Providing and fixing board of size 60 cm. having shape of Rrctngle prepared on 16 gauge M.S. sheet including painting with one coat of zinc cromate stoving primer and two coats each of white back ground, red border and backside gray stove enamelled, bonded with cut out of Retro reflective sheet Engineering grade, symbol / letters / numerals / border / arrow, coated with non pealable crystal clear protective transparent coat retaining 100% reflection including one number of M.S. Angle iron post of size 50 x 50 x 5 mm of 3.65 m. long inflated at bottom drilled on top in one piece without joint painted with white and black bands of 30 cm. fixing board and post with 2 Nos. high strength G.I. bolts and nuts of size 10 mm dia. and 20 mm long including all taxes, conveying, fixing in ground with cement concrete 1:4:8 block of 60 cm x 60 cm x 75 cm size etc.complete. 60 cm. equilateral triangle M.S. sheet with Engineering grade,

for Sathe nagar

ROYALTY CHARGES :- Supply of Rubble,Murum ,Soil, 60 mm./40mm. Metal (Hand broken), royalty charges are not included in the rates. [As per Govt. of Maharashtra, Revenue May, 2015. States that the royalty charges of Rs.141.34/Cu.M.) are considered. The surcharge levied on Royalty shall also be payable to the BASIC RATE

for Sathe nagar

ADD 2 % OF ROYALTY FOR SURCHARGE

for Sathe nagar

Laboratory testing charges - are not considered in the Rate Abstracts. Where ever required separate item shall be taken in the estimate for material testing charges, on the basis of testing frequency and charges fixed by Vigilance & Quality Control Circle, for the current year and shall form part of tender. testing of material by Quality control and certified quality must be use by CONCRETE PAVING BLOCK Compressive strength, water Absorption (Set of 8 Blocks), Flexural Test (Set of 8 Blocks), Resistance to wear (Set of 8 Blocks)

for Sathe nagar

ADD 12 % GST TAX

for Sathe nagar

ADD 1% LABOUR INSURANCE

for Sathe nagar