Rural Development Department Tender

Supplying trap/granite/quartzite/gneiss stone metal of required size by bringing the boulders / Rubble at the road side breaking them to required gradation including conveying the boulders /Rubble and stacking the broken metal etc. complete . (Prior approval of sample stack of broken metal by the Ex. Engineer is necessary the date of approval will form part of the measurements) b) 40 mm Metal, By breaking Boulders (Hand broken) (SSR 19-20 Item No.50.57) As directed by Engineer-in-charge Km-1

Spreading 80/40 mm metal for road work including sectionong etc complete as directed by Engineer in charge . (SSR 19-20 Item No.50.58) As directed by Engineer-in-charge

Supplying hard murum/ kankar at the road site, including conveying and stacking complete. (SSR 19-20 Item No.2.29a) Km-1

Supplying soft murum at the road site, including conveying and stacking complete. (SSR 19-20 Item No.2.29b) Km-1

Spreading hard murum/ soft murrum/ gravel or kankar for side width complete (SSR 19-20 Item No.2.30)

Compacting the sub grade/gravel/oversize metal (200 mm loose) layers for all width with Power roller having weight 8 to 10 MT. including necessary, labour, materials and artificial watering complete. (SSR 19-20 Item No.50.59) As directed by Engineer-in-charge

Compacting the sub grade / gravel / size metal (100 mm loose) layers for all widths with Power roller having weight 8 to 10 MT. including necessary, labour, materials and artificial watering complete. (SSR 19-20 Item No.50.61) As directed by Engineer-in-charge

Compacting the hard murum side widths including laying in layers on each side with vibratory roller including artificial watering etc. complete. (SSR 19-20 Item No.2.31)

Providing and constructing 75 mm. thick Modified Penetration Macadam (MPM) road surface including all materials, preparing the existing road surface, spreading 40 mm. stone metal layers 30% crusher broken metal + 70% Hand broken (by breaking rubble obtained by blasting) heating and spraying the bitumen of specified grade @ 2 Kg/sqm, spreading 12 mm.size chips compacting with three wheel static roller having weight 8 to 10 MT. to achive the desired degree of compaction as per Technical Specification Clause 506 etc. complete. Including picking of existing WBM surface. (VG-30 bulk bitumen rates are considered to arrive at rates) (SSR 19-20 Item No.3.35a) IRC-SP-20, 2002 Clause No. 8.7.3 Km-1

Open Graded Premix Surfacing- Providing and Laying OGC 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates premixed with bituminous binder transported to site with VTS , laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction but excluding prime / tack and Seal coat. For Bitumen of specified grade--USING drum mix type hot mix plant with SCADA, Paver and Vibratory roller ( Over MPM Surface) (VG-30 bulk bitumen rates are considered to arrive at rates) (SSR 19-20 Item No.4.12) MORTH 511 Km-1

9 MM SEAL COAT: Providing and laying of Type A 9mm premix seal coat with HMP of apropriate capacity crushed stone chiping 6.7 mm size and penetration bitumen of specified grade @ 1.2kg/Sq.m, preparing existing road surface by mechanical means, spreading chips and rolling, by static roller having weight 8 to 10 MT. etc. complete.(VG-30 bulk bitumen rates are considered to arrive at rates) (SSR 19-20 Item No.4.13) MORTH 513 Km-1

Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge (SSR 19-20 Item No.6.36) MORTH 801

80 mm Water Absorption

Impact Value

Gradation / Sieve Analysis

Flakiness Index & Elongation Index

40 mm Water Absorption

Impact Value

Gradation / Sieve Analysis

Flakiness Index & Elongation Index

Hard Murum Liquid limit & plastic limit

Soft Murum Liquid limit & plastic limit

75 mm MPM (Crusher Metal) Water Absorption

Impact Value

Gradation / Sieve Analysis

Flakiness Index & Elongation Index

Bitumen Penitration

Ductility

Softening Point

Viscosity

Carpet Mix Extraction Test / Binder Content

Seal Coat Mix Extraction Test / Binder Content

Royalty Charges