Rural Development Department Tender

A) With Excavated Material

B) With Private Material R.A.

Item No.4 :- Spreading soft murum & stone dust over the rubble soling, oversize and size metal layer / blandage on W.B.M. surface etc. complete SSR P/I. 2.30

Item No.5 :-Providing and constructing 50 mm. thick Modified Penetration Macadam (MPM) road surface including all materials, preparing the existing road surface, spreading 40mm. stone layers metal 100% crusher broken metal with conical crusher palnt, heating and spraying the bitumen of specified grade @ 1.75Kilogram/ Square Metre, spreading 12mm.size chips compacting with Static roller having weight 8 to 10 MT. to achive the desired degree of compaction as per Technical Specification Clause 506 etc.complete, including applying tack coat at the rate of 0.30KilogramSquare Metre.on existing bitumen surface. (VG-30 bulk bitumen rates are considered to arrive at rates). R.A.

Item No.6 :--Providing 20 mm thick premix bituminous carpet including supplying all materials, preparing and cleaning the base, heating bitumen applying tack coat at specified rate, mixing hot bitumen and chips laying the carpet layer and compacting etc complete. By Bulk Asphalt . R.A.

Item No. 7:-- Providing bituminous Type A liquid seal coat on bituminous surface including supplying all materials and bitumen of VG-30 grade preparing existing road surface, heating and applying bitumen @ 0.98 KgSqm. by mechanical means, spreading chips and rolling, by static roller having weight 8 to 10 MT. etc. complete. R.A.

Item No.8 :-Providing and fixing Road junction / Information sign board of size 0.90 m x 0.60 m. prepared on 16 gauge M.S. sheet with angle iron frame of size 35x35x5 mm including painting with one coat of zinc cromate stoving primer and two coats each of green/ white back ground and back side gray stove enamelled, bonded with red retro reflective sheet Engineering grade, border / letters / numeral / arrows, coated with non pealable crystal clear protective coat retaining 100% reflection including two angle iron post of size 50x50x5 mm of 3.65 m. long inflated at bottom drilled on top and painted in white and black bands of 30 cm. with 4 Nos. high strength G.I. bolts and nuts of size 10 mm dia. and 20 mm long sheet and angle iron post in one piece without joints including all taxes, conveying, fixing in ground with cement concrete 1:4:8 block of 60 cm x 60 cm x 75 cm size as directed by Engineer-in-charge etc. complete. Mild Steel Board with Engineering Grade..S S R P/I 6.47

Item No.9 :- Royalty Charges of Material

Murum

Item No. 10 :- Payment of testing charges if contractor produced authourised results

DSR - I/P - VQCC DSR for 2014-2015

Quality of binder

Gradation

GST