Rural Development Department Tender

Item No. 4 Providing and supplying ISI mark CI D/F reflux valves (non-return valves ) of following dia including railway freight, inspection charges, unloading from railway wagon, loading into truck, transportation upto departmental stores, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete. Reflux valves as per I.S.5312 Part I (1984) without by pass Reflux valves 100 mm Dia

Item No. 5 Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete without by pass Sluice valves 100 mm Dia for Washout

Item No. 6 Providing and supplying Air Valves as per IS- 14845-2000 and MJP’s standard specifications of approved make and quality of following diameters including railway freight, inspection charges, unloading from railway wagons, loading into truck, transportation upto departmental stores, unloding and stacking excluding GST levied by GOI & GOM in all respect etc. complete. Air valves 15 mm Dia

Item No. 7 Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A 1/259) Earth Soils

Item No. 8 Excavation for foundation / pipe trenches in hard murum and boulders, W.B.M. road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd A-3/259)

Item No. 9 Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking as directed by Engineer-in charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A-4/259) Soft Rock

Item No. 10 Excavation for foundation / pipe trenches in hard rock and concrete road by chiselling, wedging, line drilling by mechanical means or by all means other than blasting including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the area and lifts as below, stacking as directed by Engineer-in-charge, normal dewatering, excluding backfilling, etc. complete by all means. (Bd-A-6/259) Hard Rock

Item No. 11 Filling in plinth and floors murum bedding in trenches with approved murum from excavated materials from foundation in 15 cm to 20 cm layers including watering and compaction, etc. complete. (Bd-A-10/263) Total Rate

Item No. 12 Lowering, Laying and Jointing H. D. P. E./M. D. P. E. pipes in proper position including all specials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II 90 mm dia HDPE PN 6 Pipes Basic Rate Rs 75.00

Item No. 13 Lowering, laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete. (Rate for all class of valves.) Sluice valves 100 mm Dia Basic Rate Rs 2545.00 HILLY AREA/MMRDA (10%)

Item No. 14 Lowering, laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete. (Rate for all class of valves.) Reflux valves 100 mm Dia Basic Rate Rs 2545.00 HILLY AREA/MMRDA (10%)

Item No. 15 Lowering, laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete. (Rate for all class of valves.) Sluice valves 100 mm Dia for Washout Basic Rate Rs 2545.00

Item No. 16 Lowering, laying and fixing in proper alignment and position all types of C.I. air valves as directed by Engineer-in-charge including cost of conveyance from stores to site of work, cost of all material and giving satisfactory hydraulic testing, etc. complete. (for all class of valves). Air valves 15 mm Dia

Item No. 17 Providing and laying in situ Cement Concrete of trap/ granite / quartzite / gneiss metal for RCC work in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering, form work, compaction, finishing and curing, etc. complete. (By weigh batching and mix design for M250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement) a) 1:2:4 (M-150) grade for Thrust Blocks b) 1:2:4 (M-150) grade fo

Item No. 18 Valve Chamber with Precast RCC Covers Providing and constructing B.B. masonry valve chamber with 15 cm thick 1:3:6 proportion PCC bedding, excluding excavation, B.B. masonry in CM 1:5 proportion precast RCC frame and cover, etc. complete as directed by Engineer-in-charge. As above of 90 x 60 cm internal size and depth upto 1.2 M with precast R.C.C slab cover. MJP SSR 2023-24, P. No. 283, I. No. 1c Basic Rate Rs 7382.00 HILLY AREA/MMRDA (10%) Total Rate

Item No. 19 Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete. MJP SSR 2023-24, P. No. 40, It. No. 15 Basic Rate Rs 92.00 HILLY AREA/MMRDA (10%)

Item No. 20 Hydraulic testing of H. D. P. E./ M. D. P. E. pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position.. 90 mm dia HDPE PN 6 Pipes

Item No. 1 Designing (aesthetically), and constructing RCC ground service reservoirs / RCC sumps in M-300 mix of required capacity including excavation in all types of strata, foundation concrete, container walls, bottom slab top RCC roof slab / or dome, 20 mm thick cement plaster with water proofing compound in CM 1:3 proportion to inside face of the container, including epoxy paint from inside including refilling and disposing of surplus stuff within lead of 50 M, all labour and material charges, for laying and jointing of pipe assembly for inlet, outlet washout, over flow and bypass arrangement consisting of C.I. M.S. D/F. pipes, specials and valves of given diameters, providing and fixing accessories such as M.S. ladder inside and outside, C.I. Manhole frame and cover, water top slab, B.B. masonry chamber for all valves, ventilating shafts, including giving satisfactory hydraulic test and water tightness test as per IS code and providing three coats of cement paints to all exposed surface of structure including roof surface etc. complete as per design data, criteria, obligatory requirements and detailed specifications. Anti-termite treatment shall be given for underground portion of the structure. Notes :- The design shall be in accordance with various relevant I.S. specification (I.S. 456/1978, I.S. 875 - 1987, I.S. 3370 -1965 or revised.) Only M.S. bars grade I conforming to I.S. 432 part-I or high yield strength deformed bars conforming to I.S. 1786 or I.S. 1139 shall be used. Grade -II M.S. bars shall not be used. Entire structure shall be in M-300 only. The scope of pipe assembly work shall be upto 5 metre beyond outside face of the wall, cost of pipes valves and specials is not included in the rate but labour cost for laying and jointing is included. The G.S.R. / Sump above 15 lakh litres capacity shall be in two compartment. The Job includes designing the structure for uplift pressure and dewatering if required during entire execution and disposal of surplus excavated stuff within lead of 50 metres as directed by Engineer in-charge. If uplifts considered in design, then these rates shall be increased by 7.5%. G.S.R. outlets shall be with bell mouth of approved pattern in bottom slab and cost of designing bell mouth is included in the rate. Sump well includes cost of suction pit required at bottom. For pipe diameters upto 300 mm only CI pipes and CI specials shall be used. For pipe diameters above 300 mm, M.S. pipes and specials minimum 10 mm thick shall be used with proper anticorrosive epoxy treatment from inside and outside. Cost of pump house is not included in these rates Above rates are applicable for Seismic Zones 2, 3 and 4. 75% part rate shall be payable for reinforcement, concrete and plastering items of all types of G.S.R.s and sumps till satisfactory hydraulic testing for water tightness test is given and till that work shall be treated as incomplete. Note : Conditions from Sr. No. 1 to 11 shall form a part and parcel of tender and must be included in the draft tender papers for work of R.C.C. GSRs and sumps RCC SUMP 26000 Litrs

Item No. 2 Providing and supplying in standard lengths Polyethelene Pipes, confirming to IS 4984 / 14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i.e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by GI & GOM in all respect etc. complete. Note:- H.D.P.E. Pipes shall be as per latest IS Specifications Also HDPE pipes upto 110 mm Dia shall be in coil form 110 mm dia HDPE PN 8 Pipes 125 mm dia HDPE PN 8 Pipes

125 mm dia HDPE PN 8 Pipes

Item No. 3 Lowering, Laying and Jointing H. D. P. E./M.D. P. E. pipes in proper position including all specials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II

125 mm dia HDPE PN 8 Pipes

Item No :- 4 Providing and supplying ISI standard MS specials of required thickness with 3 coats of approved make epoxy paint (Shalimar, Ciba or Mahindra & Mahindra make) from inside and outside excluding all statutory duties & taxes such as GST levied by GOI & GOM in all respect, inspection charges, transportation to stores / site, and stacking, etc. complete. Double flanged specials of all diameters

Item No. 1 Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A- 1/259) Basic Rate Rs 165.00 ADD 10.00% For MMRDA AREA MJP DSR 2021-22 P No 42; I No 1

Item No. 2 Excavation for foundation / pipe trenches in hard murum including removing the excavated material upto a distance of 50 M and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A-2/259) Basic Rate Rs 187.00 ADD 10.00% ForMMRDA AREAs MJP DSR 2021-22 P No 42; I No 1

Item No. 3 Providing dry trap/ granite/ quartzite/ gneiss, rubble stone soling in 15 cm to 20 cm thick layers including hand packing and compacting, etc. complete. (Bd-A-12/264) Basic Rate Rs 1316.00 ADD 10.00% ForMMRDA AREAs (MJP DSR 21- 22, Pg No.46, It.No.18 )

Item No. 4 Providing and laying in situ Cement Concrete M-15 of trap/ granite / quartzite / gneiss metal for foundation and bedding including bailing out water, form work, compaction, curing, etc. complete. (Cement 5.90 bags / cum) Basic Rate Rs 5881.00 ADD 10.00% ForMMRDA AREAs (MJP DSR 21- 22, Pg No.49, It.No.1b )

Item No. 5 Providing uncoursed rubble masonry of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in foundation and plinth of inner walls / in plinth of external walls including bailing out water manually , striking joints on un exposed faces and watering etc.complete Basic Rate Rs 5025.00 ADD 10.00% ForMMRDA AREAs ( PWD DSR 2022-23, P.N. 146, I.N.28.01)

Item No. 6 Providing flush grooved pointing with cement mortar 1:3 for stone masonry work including scaffolding and curing etc. complete. Basic Rate Rs 182.00 ADD 10.00% ForMMRDA AREAs ( PWD DSR 2022-23, P.N. 257, I.N.32.17

Item No. 7 Filling in plinth and floors / trenches with contractor's murum for bedding in 15 cm to 20 cm layers including watering and compaction, etc. complete. (Bd-A-11/263) Basic Rate Rs 912.00 ADD 10.00% ForMMRDA AREAs (MJP DSR 21-22 Page No.46, It No.17)

Item No. 8 Providing and casting in situ C.C. of trap / granite/ quartzite / gneiss metal of approved quality for RCC works as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, centering, form work, compaction, finishing the formed surfaces with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface wherever necessary or roughening if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement) Basic Rate Rs 8674.00 ADD 10.00% ForMMRDA AREAs (MJP DSR 21-22 Page No.50, It No.4b)

Item No. 9 Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete Basic Rate Rs 7994.00 ADD 10.00% ForMMRDA AREAs (PWD DSR 2022-23 Page No.242 It.No 27.05)

Item No. 10 "Providing and fixing Country cut teak wood single leaf panelled door shutter without fanlight and 25mm thick as per drawing consisting of T.W. top rail size 100mm x 25mm and bottom lock rail 200mm x 25mm insert pannel 12 mm thick commercial ply faced T.W. particle board with phenol formaldehyde synthetic resin (Generally confirming to ISI 3097) excluding frame, including stainless steel fixture and fastening and T.W. beading to junctions of panelled inserts and as instructed by the Engineer in charge including 3 coats of oil painting etc. complete." Basic Rate Rs 5852.00 ADD 10.00% ForMMRDA AREAs

Item No. 11 Providing and fixing steel window of various sizes as per detailed drawing without hot dip zinc coating, without ventilators, including fabricating / glazing with plain / obscured glass panels of approved type and quality, iron oxidised fixtures and fastenings, finishing with oil painting two coats complete (with guard bars 12 mm square at 10 cm c/c.) Basic Rate Rs 4874.00 ADD 10.00% ForMMRDA AREAs (PWD DSR 2022-23 Page No.306 It.No 39.20)

Item No. 12 Providing and casting in situ C.C. of trap / granite/ quartzite / gneiss metal of approved quality for RCC works as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, centering, form work, compaction, finishing the formed surfaces with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface wherever necessary or roughening if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement) Basic Rate Rs 8674.00 ADD 10.00% ForMMRDA AREAs (MJP DSR 21-22 Page No.50, It No.4b)

Item No. 13 Providing and casting in situ C.C. of trap / granite/ quartzite / gneiss metal of approved quality for RCC works as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, centering, form work, compaction, finishing the formed surfaces with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface wherever necessary or roughening if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement) Basic Rate Rs 9273.00 ADD 10.00% ForMMRDA AREAs (MJP DSR 21-22 Page No.51, It No.6b)

Item No. 14 Providing and casting in situ C.C. of trap / granite/ quartzite / gneiss metal of approved quality for RCC works as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, centering, form work, compaction, finishing the formed surfaces with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface wherever necessary or roughening if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement) Basic Rate Rs 9313.00 ADD 10.00% ForMMRDA AREAs (MJP DSR 21-22 Page No.50, It No.5b)

Item No. 15 Providing and fixing in position steel bar reinforcement of various diamenters for RCC piles, caps, footing, foundation, slabs, beams, columns, canopies, staircases, newels,chjjas, lintels, pardies, copings, fins, arches, etc. as per detailed designs, drawings and schedules, including cutting, bending, hooking he bars, binding with wires or tack welding and supporting as required, etc. complete.(including cost of binding wire) Basic Rate Rs 80681.00 ADD 10.00% ForMMRDA AREAs ( MJP DSR 21-22, P.No.52,t.No.8(b) )

Item No. 16 Providing internal cement plaster 20mm. thick in Single coats in cement mortar 1:3 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete. Basic Rate Rs 393.00 ADD 10.00% ForMMRDA AREAs (PWD DSR 2022-23 Page No.256 It.No 32.08)

Item No. 17 Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. Basic Rate Rs 639.00 ADD 10.00% ForMMRDA AREAs

Item No. 18 Providing and laying cement concrete flooring 50mm thick with cement concrete M-25 laid to proper line etc complete. Basic Rate Rs 581.00 ADD 10.00% ForMMRDA AREAs (PWD DSR 2022-23 Page No.262 It.No 33.13)

Item No. 19 Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding,preparing the surfaces.(excluding the primer coat.) etc. complete. Basic Rate Rs 48.00 ADD 10.00% ForMMRDA AREAs

Item No. 20 Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to old plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete. Basic Rate Rs 78.00 ADD 10.00% ForMMRDA AREAs

Item No. 1 Providing, erecting and giving test of submersible pump set conforming to IS 8034 and motor conforming to IS 9283, with water proof winding. Pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suitable for working on 415 V ± 10%, 3 Ph, 50 Hz A.C. Supply, with cable guard, thrust carbon / fiber bearing to withstand entire hydraulic thrust. The pump set shall be suitable for direct coupling, with suitable suction strainer. Pump should have suitable discharge out let as per manufacturer's design. Antithrust stream lined non return valve shall be provided with the pump. 3 m submersible copper conductor cable in single / double run and 2 pairs of suitable size erection clamp 10 mm thick shall be provided with each pump. Submersible Pump150 mm dia (with Bronze / Stainless steel (CF8M) Impeller) up to 8

Item No. 2 Supplying & erecting flat flexible 3 core 10 sq.mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete. 3 core 10 sqmm PWD DSR 2022-23 It No. 12-4-12, Pg no 204

Item No. 3 Supplying and erecting, assembled Fully Automatic Star Delta starter, in a provided cubical panel to operate squirrel cage induction motor working on 380- 440 Volt, 3 phase, 50 Hz with no volt coil, over load relay and ON-OFF push buttons, with necessary material and connected to supply, etc complete. 7.5 HP & Up to 12.5 HP (MJP /DSR (Mech,)2023-24 I.No.1 P.No.38 LG 1-1) Basic Rate Rs 9462

Item No. 4 Supplying and erecting DOL starter to operate squirrel cage induction motor working on 380- 440 Volt, 3 phase, 50 Hz with no volt coil and over load element with necessary material and connected to supply, etc complete. Starter with original sheet steel encloser. as RA Attached

Item No. 5 Providing, erecting Pressure gauge of required range complete with syphon tube, isolating cock suitable for 12 mm dia G.I. Pipe. Pressure gauge shall be installed as directed, with tapping on rising main. Ghyscerine filled Pressure gauge Bourdon’s type Each 0 to 20 kg/cm2 with syphone tube, cock etc. as IS 3624:1987 Pressure gauge (100 mm dia) (MJP /DSR(Mech.)2023-24 Pg no 10, PM 11-1)

Item No. 6 Providing tools for pumping. As per Rate Analysis

Item No. 7 Main wiring work from M. S. E. B. cut out to the panel board 4 core x 459 mm 1100 grade with I. S. I. Mark standard / Aluminum armored cable (94.1 p.36) Supplying and erecting, XLPE / PVC insulated, armoured cable 1100 V grade with ISI mark Four core, solid / stranded aluminium conductor with 6 mm thick 25 mm width M.S. spacer with G.I. Earth wire 6 sq mm, complete erected on wall / on pole with 25 X 3 mm M.S. clamps or in provided trench in an approved manner.

Item No. 8 Providing pipe type earthing with 40mm. dia. G.l. pipe or 20 mm dia. G.l. Rod complete with all materials as per specification no. EA-EP (PWD DSR 2022-23, Pg No 160 It No. 9-1-4 )

Item No. 9 Providing, erecting triple spur gear type Chain Pulley Block suitable for capacity as below with 6 m lift complete with load chain and hand chain suitable for above lift, tested to 50% over load as per IS 3832 carrying ISI mark. 1 Tonne Capacity (MJP Mech. DSR,Pg N.-19, LF-1-1)

Item No. 1 Supplying, installing, testing and commissioning of solar water pump of 5 HP capacity, DC submersible type (with controller) 100800 LPD/ 67200LPD/ 45600LPD, total head of 50m/70m/ 100m, comprising of 4800Wp/ 4800Wp/ 4800Wp/ PV array respectively mounted on GI structure with necessary hardware with 5 years on site performance warrantee. Specification no. ESD-SWPS 5.0 BHP SOLAR PUMP

Item No. 2 Providing and erecting 1.5 metre high wire fencing with seven rows of barbed wire supported on M.S.Angles ( 50mm x 50mm x 6mm) at 2.5 Metres, Center to center including excavating pits for foundqtion, fixing post in cement cocnrete 1:4:8 of size 45 x 45 x 45 cm fastening the wire and painting the M.S.Angles with one coat of red lead primer and two coats of painting etc.complete. PWD SSR 2022-23, Pg No.293, I.No 44.09 HILLY AREA 10%

Item No. 3 Providing and fixing mild steel grill gate with angle iron frame 65mm x 65mm x 10mm with iron bars at 150mm C/C and diagonal flats as per the detailed drawing including hinges, pivot block locking arrangement, welding riveting and oil painting of three coats of approved shade Weight of gate 35 Kilogram/Smt BASIC RATE Rs.3190 PWD SSR 2022-23, Pg No.294, I.No 44.10 HILLY AREA 10%

Item No. 1 Providing of aquasoft pressure filter systems automatic online hydraulically operated cell cleaning filter with required accessories etc. Complete for connecting to rising main with maximum or minimum operating pressure of 3.5BAR and 2BAR resp. And including the cost of filter inlet valve, outlet valv, bypass valve and non return valve, MS stand for support and confirming to the following specifications. a) The filter equioment is made up of epoxy or polyster carbon steel 37-2 with 1 inlet, 1 outlet and drain and the system consists of coarse screen and fine screen. b)The following accessories should be provided with the hydraulically operated self cleaning filter 1) One suitable set of inlet,outlet,bypass 2) One suitable pressure gauges to monitor the pressure loss across the filter. 3)Suitable stand made of MS frame work, so that the rising main is protected from the weight of the filter c) The manual online hydraulicaaly self cleanig filter unit is designed for the following specifications. NOTE: RATE INCLUDES: 1) INSTALLATION, ERECTION AND COMMISSIONING CHARGES. 2) INCLUSIVE OF TRANSPORT 3) 5 YEARS PERFORMANCE WARRANTY Pressure Filter with details attached here with capacity 5 5 Cum/Hr. (0.12 MLD) As per quotation received from Aquasoft Kolhapur

Item No. 1 Providing and supplying in standard lengths Polyethelene Pipes, confirming to IS 4984 / 14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i. e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by GI & GOM in all respect etc. complete. Note:- H.D.P.E. Pipes shall be as per latest IS Specifications Also HDPE pipes upto 110 mm Dia shall be in coil form

Item No. 2 Providing HDPE Specials as per standard specifications & direction of incharge Engineer. (10% of Item No.1)

Item No. 3 Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete without by pass Sluice valves 100 mm Dia Basic Rate Rs 8202.00 MJP SOR 2021-22 P No 132 ; INo 2 a

Item No. 4 Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A 1/259) Earth Soils Total Rate Basic Rate Rs 165.00 HILLY AREA/MMRDA (10%) MJP DSR 2021-22 P No 42; I No 1

Item No. 5 Excavation for foundation / pipe trenches in hard murum and boulders, W.B.M. road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd A-3/259) HMB Total Rate Basic Rate Rs 211.00 HILLY AREA/MMRDA (10%) MJP DSR 2021-22 P No 42; I No 2

Item No. 6 Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking as directed by Engineer-in charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A-4/259) Soft Rock Total Rate Basic Rate Rs 629.00 HILLY AREA/MMRDA (10%) MJP DSR 2021-22 P No 42; I No 5

Item No. 7 Excavation for foundation / pipe trenches in hard rock and concrete road by chiselling, wedging, line drilling by mechanical means or by all means other than blasting including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the area and lifts as below, stacking as directed by Engineer-in-charge, normal dewatering, excluding backfilling, etc. complete by all means. (Bd-A-6/259) Hard Rock Total Rate Basic Rate Rs 1119.00 HILLY AREA/MMRDA (10%) MJP DSR 2021-22 P No 43; I No 7

Item No. 8 Filling in plinth and floors murum bedding in trenches with approved murum from excavated materials from foundation in 15 cm to 20 cm layers including watering and compaction, etc. complete. (Bd-A-10/263) Total Rate Basic Rate Rs 92.00 HILLY AREA/MMRDA (10%) MJP DSR 2021-22, P. No. 45, It No. 16

Item No. 9 Lowering, Laying and Jointing H. D. P. E./M. D. P. E. pipes in proper position including all specials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II 110 mm dia HDPE PN 8 Pipes Basic Rate Rs 78.00 HILLY AREA/MMRDA (10%)

Item No. 10 Lowering, laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete. (Rate for all class of valves.) Sluice valves 100 mm Dia Basic Rate Rs 2545.00 HILLY AREA/MMRDA (10%) Total Rate

Item No. 11 Providing and laying in situ Cement Concrete of trap/ granite / quartzite / gneiss metal for RCC work in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering, form work, compaction, finishing and curing, etc. complete. (By weigh batching and mix design for M250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement) a) 1:2:4 (M-150) grade for Thrust Blocks b) 1:2:4 (M-150) grade for encasing C) Road Restoration Work

Item No. 12 Valve Chamber with Precast RCC Covers Providing and constructing B.B. masonry valve chamber with 15 cm thick 1:3:6 proportion PCC bedding, excluding excavation, B.B. masonry in CM 1:5 proportion precast RCC frame and cover, etc. complete as directed by Engineer-in-charge. As above of 90 x 60 cm internal size and depth upto 1.2 M with precast R.C.C slab cover. MJP SSR 2021-22, P. No. 220, I. No. 1c Basic Rate Rs 13786.00 HILLY AREA/MMRDA (10%) Total Rate

Item No. 13 Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete. MJP SSR 2021-22, P. No. 45, It. No. 15 Basic Rate Rs 92.00 HILLY AREA/MMRDA (10%) Total Rate

Item No. 14 Hydraulic testing of H. D. P. E./ M. D. P. E. pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position.. 110 mm dia HDPE PN 8 Pipes Basic Rate Rs 8335.00 HILLY AREA/MMRDA (MJP SSR 2021-22 P No 115 ; It No 3)

Item No. 1 Designing (aesthetically), and constructing RCC elevated service reservoirs of following capacity with RCC staging consisting of columns, internal and external bracings spaced vertically not more than 4.5 metres centre to centre for ESR having capacity upto 500 cum and not more than 6 m c/c for ESRs having capacity above 500 Cum including excavation in all types of strata, foundation concrete, cement plaster with water proofing compound to the inside face of the container including refilling disposing off the surplus stuff within a lead of 50 metres, all labour and material charges including lowering, laying, erecting, hoisting and jointing of pipe assembly of inlet, outlet, washout, overflow and bypass arrangements as per departmental design, providing and fixing accessories such as M.S. ladder, C.I. manhole frame and covers, water level indicators, lightening conductor, G.I. pipe railing around walk way and top slab, providing spiral stair case from ground level to roof level, M.S. grill gate of 2 M height with locking arrangement of approved design, B.B. masonry chambers for all valves, ventilating shafts, providing and applying three coats of cement paint to the structure including roof slab, epoxy painting to internal surface and anti termite treatment for underground parts of the structure and giving satisfactory water tightness test as per I.S. code. The job to include painting the name of the scheme and other details on the reservoir as per the directions of Engineer-in-Charge. Notes :- The design of the structure be in accordance with relevant I.S. specification (I.S. 3370 - 1965 or revised.) The design shall satisfy the stipulations as per I.S. 1893 - 1984 and I.S. 13920 / 1993 for seismic force and I.S. - 11682 / 1985 for R.C.C. staging of overhead tanks. For design having more than 6 columns, provision of internal bracing is obligatory. External bracings is also obligatory. The entire structure shall be in M-300 mix only. Plain round mild steel bars grade-I conforming to I.S. 432 part-I or high yield strength deformed bars conforming to I.S. 1786 or I.S. 1139 shall be used, grade-II mild steel bars will not be allowed. Irrespective of the type of foundation proposed in the design, one set of bracing be provided at the ground level. These rates include providing M.S. ladder for E.S.R.s upto 2 lakh litres capacity and providing spiral staircase for E.S.R. above 2 lakh litres capacity Staging shall have to be designed with stresses of M-200 concrete for ESR. However all RCC construction should be done in M-300. These rates are including the cost of uplift pressure if any and entire dewatering during execution. In case of water logging area where water is stretch at shallow depth, extra provision of dewatering shall be made as per site condition. All conditions given in the Member Secretary's Circular No. MJP / TS-I / 350 / 1668 dt. 2-8-97 and MJP / S-I / 350 / 2127 dt. 13-7-99 shall be strictly followed and additional cost, if any, due to these conditions is included in the rates mentioned below. 75% part rate shall be payable for reinforcement concrete and plastering items of containers of E.S.R. till satisfactory hydraulic testing for water tightness is given; and till that work shall be treated as incomplete. RCC ESR 70000 Litrs 50000 Liter = Rs. 1485227/- 20000 x Rs 14.4 = Rs. 288000/- For Deduction for ST HT. (6%) RCC ESR ST.HT. 9

Item No. 2 Providing and supplying ISI standard welded DI double flanged pipe excluding GST levied by GOI & GOM in all respect, railway freight, insurance, unloading from railway wagon, loading into truck transport to store / site, unloading, stacking etc. complete as directed by Engineer -in- charge. (for 2.75 m bare pipe) 100 mm dia DI Double Flanged Pipes

Item No. 3 Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete without by pass - PN 1 Sluice valves 100 mm Dia

Item No :- 4 Providing and supplying ISI standard D. I. specials & fitting with sealing rubber gasket of S.B.R, complete with cast iron follower gland and M. S. nut bolts coated or otherwise protected from rusting and suitable for D.I.pipes including cost of labour ,materials, and transportation to stores / site, loading and unloading excluding GST levied by GOI & GOM in all respect, complete as per IS-9523. For all types of specials, bends tees etc (80 to 300 mm dia) Double flanged specials of all diameters

Item No. 1 Providing and supplying in standard lengths Polyethelene Pipes, confirming to IS 4984 / 14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i. e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by GI & GOM in all respect etc. complete. Note:- H.D.P.E. Pipes shall be as per latest IS Specifications Also HDPE pipes upto 110 mm Dia shall be in coil form 63 mm dia HDPE PN 6 Pipes

75 mm dia HDPE PN 6 Pipes

90 mm dia HDPE PN 6 Pipes

110 mm dia HDPE PN 6 Pipes

125 mm dia HDPE PN 6 Pipes

Item No. 2 Providing HDPE Specials as per standard specifications & direction of incharge Engineer. (10% of Item No.1)

Item No. 3 Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete without by pass Sluice valves 65 mm Dia

Sluice valves 125 mm Dia

Item No. 5 Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete without by pass Sluice valves 65 mm Dia for Washout

Sluice valves 125 mm Dia for Washout

Item No. 6 Providing and supplying Air Valves as per IS- 14845-2000 and MJP’s standard specifications of approved make and quality of following diameters including railway freight, inspection charges, unloading from railway wagons, loading into truck, transportation upto departmental stores, unloding and stacking excluding GST levied by GOI & GOM in all respect etc. complete. Air valves 15 mm Dia

Item No. 7 Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A 1/259) Earth Soils Total Rate Basic Rate Rs 165.00 HILLY AREA/MMRDA (10%) MJP DSR 2021-22 P No 42; I No 1

Item No. 8 Excavation for foundation / pipe trenches in hard murum and boulders, W.B.M. road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd A-3/259) HMB Total Rate Basic Rate Rs 211.00 HILLY AREA/MMRDA (10%)

Item No. 9 Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking as directed by Engineer-in charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A-4/259) Soft Rock

Item No. 10 Excavation for foundation / pipe trenches in hard rock and concrete road by chiselling, wedging, line drilling by mechanical means or by all means other than blasting including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the area and lifts as below, stacking as directed by Engineer-in-charge, normal dewatering, excluding backfilling, etc. complete by all means. (Bd-A-6/259) Hard Rock

Item No. 11 Filling in plinth and floors murum bedding in trenches with approved murum from excavated materials from foundation in 15 cm to 20 cm layers including watering and compaction, etc. complete. (Bd-A-10/263) Total Rate

Item No. 12 Lowering, Laying and Jointing H. D. P. E./M. D. P. E. pipes in proper position including all specials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II 63 mm dia HDPE PN 6 Pipes

75 mm dia HDPE PN 6 Pipes

90 mm dia HDPE PN 6 Pipes

110 mm dia HDPE PN 6 Pipes

125 mm dia HDPE PN 6 Pipes

Item No. 13 Lowering, laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete. (Rate for all class of valves.) Sluice valves 65 mm Dia

Sluice valves 125 mm Dia

Item No. 15 Lowering, laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete. (Rate for all class of valves.) Sluice valves 65 mm Dia for Washout Basic Rate Rs 1401.00

Sluice valves 80 mm Dia for Washout

Item No. 16 Lowering, laying and fixing in proper alignment and position all types of C.I. air valves as directed by Engineer-in-charge including cost of conveyance from stores to site of work, cost of all material and giving satisfactory hydraulic testing, etc. complete. (for all class of valves). Air valves 15 mm Dia Basic Rate Rs 149.00 HILLY AREA/MMRDA (10%) Total Rate MJP SOR 2021-22 P No 137 ; INo 10 a

Item No. 17 Providing and laying in situ Cement Concrete of trap/ granite / quartzite / gneiss metal for RCC work in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering, form work, compaction, finishing and curing, etc. complete. (By weigh batching and mix design for M250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement) a) 1:2:4 (M-150) grade for Thrust Blocks b) 1:2:4 (M-150) grade for encasing C) Road Restoration Work

Item No. 19 Valve Chamber with Precast RCC Covers Providing and constructing B.B. masonry valve chamber with 15 cm thick 1:3:6 proportion PCC bedding, excluding excavation, B.B. masonry in CM 1:5 proportion precast RCC frame and cover, etc. complete as directed by Engineer-in-charge. As above of 90 x 60 cm internal size and depth upto 1.2 M with precast R.C.C slab cover. MJP SSR 2023-24, P. No. 220, I. No. 1c

Item No. 20 Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete. MJP SSR 2021-22, P. No. 45, It. No. 15 Basic Rate Rs 92.00 HILLY AREA/MMRDA (10%)

Item No. 21 Hydraulic testing of H. D. P. E./ M. D. P. E. pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position.. 63 mm dia HDPE PN 6 Pipes

75 mm dia HDPE PN 6 Pipes

90 mm dia HDPE PN 6 Pipes

110 mm dia HDPE PN 6 Pipes

125 mm dia HDPE PN 6 Pipes

Item No. 22 Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge PWD SSR 2022-23 I. No. 6.36 , P No 60, S.No 284, It No 6.36 Basic Rate Rs 10010.00 HILLY AREA/MMRDA

ITEM NO. 1 Commissioning, running and maintaining the scheme to quantities, rated capacity, including manning necessary personnel such as operator, valveman, etc. as per requirements of the scheme and who should also administer chemical dose for a period of 1 month for individual scheme and for regional scheme, together with training of personnel spared by MJP / Local Body and handing over the scheme to Local Body after completion of the above period as directed by Engineer-in-charge. Note: Required chemicals to be supplied by Department free of cost and electricity bill will also be paid by the Department. For Singal Village without WTP MJP DSR 23-24,Pg no.295, It no.1 a For 1 Month 30181 x 01 Months

Add 18% GST