Rashtriya Chemicals And Fertilizers Limited Tender

Providing and laying in position plain cement concrete of specified grade cement with trap/granite/quartzite/gneiss metal mixing in concrete mixer including bailing out water, compacting, finishing surface, curing and including the cost ofcentering and shuttering at all level Nominal Mix of 1:4:8 (1 Cement OPC: 4 coarse sand : 8 graded stone aggregate 20 mm nominal size)

Providing and laying in position ready mixed design mix M-25 grade cement concrete for reinforced cement concrete work for raft, foundations, base of column. grade slab using cement content as per approved design mix, including pumping of concrete to site of laying and the cost of centering, shuttering, finishing and excluding reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.The Mix design as per particular specfications shall be got approved by Engineer-in-Charge before execution of the item.The rate shall include cost of all specified materials and operations at all levels and heights, including the cost of centering, shuttering and and excluding reinforcement which shall be paid under relevant item.(Note :- Cement content considered in this item is @ 300 kg/cum as per IS 456 table showing minimum cement content. No extra will be paid nor any amount will recovered on account of variation of cement in mix design as per specifications for controlled concrete). Site mix (Mixer) shall be permitted with prior approval from CM (Civil) / DGM (Civil) and in such case rate shall be reduced by ₹ 1120 /m3 All works (including Centering & Shuttering)

Providing and laying in position ready mixed design mix M-25 grade cement concrete for reinforced cement concrete work for columns, struts, using cement content as per approved design mix, including pumping of concrete to site of laying and the cost of centering, shuttering, finishing and excluding reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.The Mix design as per particular specfications shall be got approved by Engineer-in-Charge before execution of the item.The rate shall include cost of all specified materials and operations at all levels and heights, including the cost of centering, shuttering and and excluding reinforcement which shall be paid under relevant item.(Note :-Cement content considered in this item is @ 300 kg/cum as per IS 456 table showing minimum cement content. No extra will be paid nor any amount will recovered on account of variation of cement in mix design as per specifications for controlled concrete). Site mix (Mixer) shall be permitted with prior approval from CM (Civil) / DGM (Civil) and in such case rate shall be reduced by ₹ 1120 /m3 All works (including Centering & Shuttering)

Providing and laying in position ready mixed design mix M-25 grade cement concrete for reinforced cement concrete work for beams at all levels, using cement content as per approved design mix, including pumping of concrete to site of laying and the cost of centering, shuttering, finishing and excluding reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.The Mix design as per particular specfications shall be got approved by Engineer-in-Charge before execution of the item.The rate shall include cost of all specified materials and operations at all levels and heights, including the cost of centering, shuttering and and excluding reinforcement which shall be paid under relevant item.(Note :- Cement content considered in this item is @ 300 kg/cum as per IS 456 table showing minimum cement content. No extra will be paid nor any amount will recovered on account of variation of cement in mix design as per specifications for controlled concrete). Site mix (Mixer) shall be permitted with prior approval from CM (Civil) / DGM (Civil) and in such case rate shall be reduced by ₹ 1120 /m3 All works (including Centering & Shuttering)

Providing and laying in position ready mixed design mix M-25 grade cement concrete for reinforced cement concrete work for slab, landings, roofs, canopy, chajja using cement content as per approved design mix, including pumping of concrete to site of laying and the cost of centering, shuttering, finishing and excluding reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.The Mix design as per particular specfications shall be got approved by Engineer-in-Charge before execution of the item.The rate shall include cost of all specified materials and operations at all levels and heights, including the cost of centering, shuttering and and excluding reinforcement which shall be paid under relevant item.(Note :- Cement content considered in this item is @ 300 kg/cum as per IS 456 table showing minimum cement content. No extra will be paid nor any amount will recovered on account of variation of cement in mix design as per specifications for controlled concrete). Site mix (Mixer) shall be permitted with prior approval from CM (Civil) / DGM (Civil) and in such case rate shall be reduced by ₹ 1120 /m3 All works (including Centering & Shuttering)

Providing and laying in position ready mixed plain cement concrete, using fly ash and cement content as per approved design mix from Engineer-in-charge and fly ash conforming to grade I of IS 3812 (Part-1) only be used as part replacement of OPC as per IS 456 and uniform blending with cement is to be ensured in accordance with clauses 5.2 and 5.2.1 of IS: 456- 2000 in the items of ready mixed concrete and manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for plain cement concrete work, including pumping of R.M.C. from transit mixer to site of laying and curing, including the cost of centering, shuttering and finishing, including cost of curing, admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in - charge. M-20 grade plain cement concrete. Site mix (Mixer) shall be permitted with prior approval from CM (Civil) / DGM (Civil) and in such case rate shall be reduced by ₹ 1120 /m3 All works (including Centering & Shuttering)

Filling in plinth, floors, trenches, pits with approved excavated materials, murum / good earth in layers not exceeding 200mm including breaking of clods, watering, consolidating each layer in filled up area by rolling and compacting with roller/ plate compactor as required to achieve not less than 97% modified proctor density conforming to relevant IS etc. complete as directed by Engineer In charge. Note: 1) The rate includes the royalty and other taxes if any

Providing and laying in position ready mixed design mix M-25 grade cement concrete for reinforced cement concrete work for walls, using cement content as per approved design mix, including pumping of concrete to site of laying and the cost of centering, shuttering, finishing and excluding reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.The Mix design as per particular specfications shall be got approved by Engineer-in-Charge before execution of the item.The rate shall include cost of all specified materials and operations at all levels and heights, including the cost of centering, shuttering and and excluding reinforcement which shall be paid under relevant item.(Note :-Cement content considered in this item is @ 300 kg/cum as per IS 456 table showing minimum cement content. No extra will be paid nor any amount will recovered on account of variation of cement in mix design as per specifications for controlled concrete). Site mix (Mixer) shall be permitted with prior approval from CM (Civil) / DGM (Civil) and in such case rate shall be reduced by ₹ 1120 /m3 All works (including Centering & Shuttering)

Providing and fixing in position Thermo-Mechanically Treated (Fe 415)steel bars reinforcement of various diameters for R.C.C. footings,raft,retaining wall,shear wall, foundations, slabs, beams, columns, canopies, staircases, coping, fins, arches, etc. as per detailed designs, drawings and bar bending schedules,including straightening, cutting, bending, hooking the bars, binding with wires or tack welding, supporting as required etc. all complete at all levels. (Reinforcement shall be of an approved make like JSW, TATA, SAIL, RINL etc.) Test report shall be submitted

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 3.5 and upto any level in all shapes and sizes in CM 1:6

Providing and applying 12 mm thick internal plaster (1:3 CM)with white wall putty (Birla or equivalent)finish all heights and locations for masonry (except stone masonry) and concrete surfaces including racking out joints, hacking of concrete surface, finishing, curing, scaffolding etc. complete.

Providing and applying 20 mm thick (in two coats) plaster at all heights andlocations as per manufacturers recommendations for masonry with addition of waterproofing compound in first coat (except stone masonry) and concrete surfaces including racking out joints, hacking of concrete surface, finishing, curing, scaffolding etc. complete

Providing and applying first single coat of approved primer and two coats of acrylic distemper (oil bound distemper) (Asian Tractor Uno Acrylic Distemper/ Berger Bison Acrylic Distemper/ ICI Acrylic Distemper) of an approved make and colour as per manufacturers specifications to any surface, at all height and locations as directed including scaffolding, cleaning and preparing surfaces for painting with broom by any approved means, etc. complete as directed by Engineer-in-charge.

Providing and applying first single coat of approved primer and two coats of anti-algal, anti-fungal, exterior paint (Apex 100% acrylic of Asian Paints, Berger weather coat, dulux weathershield etc. as specified below of an approved make and colour as per manufacturers specifications to any surface, upto 10m height from ground level and at all locations as directed including preparing surfaces for painting by any approved means, scaffolding, cleaning and curing etc. complete as directed by Engineer-in-charge.By using acrylic based exterior paint

Providing and fixing UV resistant selffit UPVC pipes of 100mm dia of approved make for Rainwater downtakes confirming to relevant IS Type A suitable for 4kg/sqcm pressure for following pipe diameters including rain water receiving recess with pvc plug bend necessary fittings such as offsets shoes, fixing the pipes on wall with clips (if required to be weleded to MS column) filling the joints with solvent/cement and necessary scafolding etc. complete as directed by Engineer In Charge.

Providing and fixing anodized (anodic film must not be less than 15 microns i.e. AC-15 as per IS, the anodising must be scaleted by keeping the anodized section in boiling deanodized water for a period of one hour) aluminum fixed/ sliding / pivoted / top hung / side hung / louvered type windows, doors, ventilators and partitions conforming to IS:1948, 1961 with hollow bottom section & standard single / two / three / four track frame section all round (top, bottom and sides) with shutter frame made up of standard handle section standard interlocking section and standard top and bottom section with infill panel of plain / frosted / tinted glass/ Novapan sheet / acrylic sheet / hardner laminated sheet as listed below with nylon guides, gliders glass fixing PVC weather strips, neoprene gasket, PVC weep holes etc complete with approved type of locking arrangement, handles and other fixtures including fixing, filling the gaps with silicon sealant, cleaning polishing the aluminium section with petrol and / or other agents as specified by the manufacturers etc. complete as directed by Engineer In Charge. Aluminium sections used including providing and fixing tower bolts, handles, aldrops etc. (weight to be paid)

Providing and fixing 4 mm thick Plain / frosted / tinted Glass including necessary rubber gasket

Providing and fixing 4mm thick Hardener Laminated sheet (Bakelite composite panel) including necessary rubber gasket

Providing and laying heavy duty acid resistant bitumen mastic flooring of 12mm average thickness confirming to relevant IS code in proper line level, slope after proper cleaning, washing, drying and roughening of the concrete surface and application of compatible primer as directed by EIC

Providing and laying heavy duty acid /alkali resistant tiles of size 230mm X 114 mm X 38mm thick (Class - I tiles confirming to IS 4860 Part 1) for floor walls with potassium silicate bedding and bonding (confirming to IS 4832 Part II) mortar about 12mm thick to the unit surface keeping the joint width 3 to 4mm within the adjacent bricks and propoerly set removing the mortar from the joint to full size and to depth of 20mm and including pointing with furan resin mortar / phenolic resin mortar / CSNL resin based compound 3 to 5mm thick as per technical specification and jointing as per manufacturers specification as directed by EIC

Providing and Fixing of Foundation Bolts and nuts in RCC column / pedestal / beam at any level including maintaining the accuracy towards line, level & position including making and using the template etc. complete as directed by Engineer In Charge. (Contractor will take due care for its threads and rusting by applying grease and cotton waste

Providing and laying 600 x 600 x 8 mm thk. vitrified tiles as specified below conforming to I.S.15622-2006 with water absorbtion less than 0.08% for flooring of an approved, quality, make and pattern /design for flooring including cement mortar bedding of 25 mm thick in 1:4 proportion, cutting, leveling, jointing, filling the joints by neat cement slurry or approved colour grout, curing, finishing etc complete as directed by Engineer In Charge Light coloured antiskid / matt vitrified tiles. of make such as Johnson, kajaria, nitco or equivalent

Laying and installation, joining of HDPE geo membrane liner as directed by EIC

Laying and installation, joining of geo synthetic clay liner as directed by EIC

Laying and installation, joining of geo synthetic textile liner as directed by EIC

Laying and installation, joining of geo net liner as directed by EIC

Supplying, filling, spreading, levelling (by taking levels by total station) gravels (khadi) of size 5 to 10mm in ponds of required thickness for all leads, lifts, royalty etc. as directed by EIC

Laying and installation, joining of perforated HDPE pipe network of sizes 150mm and 200mm dia as directed by EIC

Providing, detailing, and fabricating as per specifications, transporting to site and erecting ladder / railing using stainless steel hollow pipes of grade 304 including, S.S. fixtures and fastenings, cleats, stiffeners, gussets etc. and all necessary operations straightening, bending, like cutting, drilling, welding, grinding and removing the welding burr, machining if specified, finishing, cleaning etc. complete as directed by Engineer In Charge

Waterproofing the terrace slab and staircase roof slab with average 100 mm thick concrete of broken brick bats and cement mortar (1:4) in the proportion of 2 parts of brick bats and 1 part of mortar, laid in proper slope (1:100) well rammed, watered and consolidated with vata 15 cm at junction of walls and Indian patent stone flooring 1:2:3 (12.5 mm chips) 40 mm thick and with admixture of approved water proofing compound as per manufacturers specifications laid after grouting the surface of brickbat coba with neat cement slurry in alternate suitable squares to required slope as directed including filling in joints with bitumen and cleaning the slab top of all dust and loose material; tamping, finishing with rope impression by making squares of 300mm X 300mm and curing complete as directed and specified. (Horizontal measurements clear between walls will be paid for).

Providing and fixing polished natural stone tiles as specified below of approved quality, pattern and colour for sill and jambs including preparing the surface and levelling in the desired line, cement mortar 1:3 bedding or backing, cement float, machine cutting, leveling, jointing, smooth cement plastering along the sides to match the existing surface in cement mortar 1:3, filling the joints with neat cement or pigment mixed with cement, finishing, curing etc complete as directed by Engineer In Charge 18mm thk. green marble for width upto 150 mm

Supply of unskilled labours