Rashtriya Chemicals And Fertilizers Limited Tender

PROVIDING AND FIXING GEAR OPERATED ROLLING SHUTTER, HAVING FOLLOWING SPECIFICATIONS, 1) LATHS/SHUTTER STRIPS OF 0.9MM THICK (MIN.) GI SHEET OF SAIL/ JSW / TATA OR EQUIVALENT. 2) GUIDE CHANNELS OF MS 100 MM X 3MM THICK (MIN.) 3) HEAVY DUTY HIGH TENSION SPRING MADE FROM HIGH TENSILE SPRING STEEL WIRE AS PER SHUTTER SIZE. 4) HEAVY DUTY GEAR SET ASSEMBLY (MACHINE CUT GEAR OF HIGH GRADE CAST IRON OR MILD STEEL) WITH PULLING HANDLE. 5) SHAFT: MS PIPE 48MM OD HEAVY DUTY. 6) BOTTOM PLATE/LOCK PLATE: MIN. 3 MM THICK REINFORCED WITH MS ANGLE OF MIN. SIZE 35X35X5MM FITTED WITH SLIDING BOLTS AND HANDLES ON BOTH SIDES. 7) BRACKETS: MS PLATE 400X400MM, MIN. 6MM THK 8) SHAFT PINJARA : MS FLAT 30 MM X 6 MM 9) TOP COVER 0.9 MM GI 10) PAINT: ONE COAT RED OXIDE PRIMER AND ONE COAT OF SYNTHETIC ENAMEL FOR MS. MATERIAL NOTE: INCASE OF LESSER THICKNESS OF SECTIONS, REDUCTION IN RATE ON PRO-RATA BASIS OF WEIGHT SHALL BE MADE. RATE IS INCLUSIVE OF SCAFFOLDING REQUIRED FOR THE WORK.

PROVIDING / FIXING COLLAPSIBLE STEEL GATE IN TWO LEAVES WITH HOT ROLLED VERTICAL CHANNELS OF 18 X 9 X 3 MM MINIMUM SIZE, CROSSINGS OF M.S. FLATS OF SIZE 18 X 5 MM T OR E SECTION FOR RUNNER OF MINIMUM 40 X 6 MM SIZE FOR FLANGE, M.S. FLAT FOR TOP RUNNER OF MINIMUM SIZE 40 X 12 MM WITH ROLLER WHEELS CONFIRMING TO GRADE F.G. 150 FITTED WITH SNAP HEADED RIVETS OF MINIMUM SIZE 6 MM MAX. SPACING OF VERTICAL CHANNELS BE 100 MM ENCLOSED GATE POSITION AND CLEAR SPACE OF 150 MM BETWEEN TWO SETS OF CROSSINGS WITH HOLD FASTS, STOPPERS, SPACES, HANDLES, LOCKING ARRANGEMENT AND ONE COAT OF RED PRIMER & OIL PAINTING ETC. COMPLETE.

SUPPLY OF WELDER / FITTER / CUTTER INCLUDING CONSUMABLE AND MACHINERY, TOOLS AS DIRECTED BY EIC. (FOR 8HRS SHIFT)

SUPPLY OF RIGGER / HELPER WITH TOOLS AS DIRECTED BY EIC. (FOR 8HRS SHIFT)

OVERHAULING THE EXISTING ROLLING SHUTTERS PUSH AND PULL TYPE OR GEAR TYPE OF UPTO 15 SQMT. AREA / COLLAPSIBLE GATES INCLUDING REQUIRED OIL & GREASE.

OVERHAULING THE EXISTING ROLLING SHUTTERS PUSH AND PULL TYPE OR GEAR TYPE OF ABOVE 15 SQMT. AREA / COLLAPSIBLE GATES INCLUDING REQUIRED OIL & GREASE.

DISMANTLING THE EXISTING STRUCTURAL STEEL INCLUDING CUTTING & TRANSPORTATION UP TO SCRAP YARD OR CIVIL OFFICE AS DIRECTED.

PROVIDING & FIXING BARBED WIRE [12 GAUGE, 2 PLY] IN LINE AND LEVEL FOR FENCING WORK AS PER INSTRUCTIONS OF ENGINEER IN-CHARGE.

PROVIDING & FIXING CHAIN-LINK FENCING G.I. 50 X 50 X 3 MM AS PER INSTRUCTIONS OF ENGINEER IN-CHARGE.

ERECTING & DISMANTLING SCAFFOLDING WITH CONTRACTOR'S MS PIPES & FITTING AS REQUIRED FOR APPROACH TO SYSTEM BY DOUBLE SCAFFOLDING, ETC. COMPLETE. SUPPORT UP-TO 6 MTR HT

SAME AS ITEM NO-12 WITH SUPPORT 6 M TO 10 M. HT.

SAME AS ITEM NO-12 WITH SUPPORT 10 M TO 20 M.HT.

SAME AS ITEM NO-12 WITH SUPPORT 20 M ABOVE

PROVIDING/FIXING HAND-RAILING WITH G.I. PIPE [M.G] OF HT.1.05 MT WITH 40 MM DIA PIPES FOR VERTICAL POST @ 1.5 MT C/C SPACING. HORIZONTAL PIPE 40 MM DIA AT TOP & 25 MM DIA AT MIDDLE LEVEL. TOE PLATE 100 MM X 6 MM THICK AT BOTTOM LEVEL INCLUDING ONE COAT OF RED OXIDE PRIMER AND TWO COATS OF SYN. ENAMEL PAINT.

FIXING OF AVAILABLE CHEQUERED PLATES/ GRATINGS INCLUDING CUTTING, FABRICATING, PAINTING AND FIXING OF IN POSITION, ETC. COMPLETE AS DIRECTED BY EIC.(RCF MATERIAL)

PROVIDING AND FIXING IN POSITION AT ALL HEIGHTS MS SHEET STEEL DOORS SHUTTER WITH FRAME OF ANGLE 35X35X4 MM AND 2 MM THK. SHEETS/ 5 MM THICK GLASS. FULL OUTER FRAME SHALL BE 40X40 X5 MM AND FIXED BY HOLD FAST GROUTED/WELDED. DOORS SHALL HAVE PROPER LEVEL ON LOCK STILES AND RAILS TO OPERATE WITHOUT BINDING AND SHALL BE HINGES LOCKING ARRANGEMENT, SURFACE HARDWARE WHERE NECESSARY. AS PER APPROVED DRAWING OF EIC.

PROVIDING & FIXING OF 0.5 MM THICK META COLOUR CORRUGATED GALVALUME SHEETS I.E. 0.45MM BASE METAL THICKNESS AND 0.50MM TOTAL COAT THICKNESS OF MINIMUM YIELD STRENGTH OF 550 MPA AND AS PER THE BELOW MENTIONED TECHNICAL SPECIFICATIONS INCLUDING CORNER PIECE, RIDGE, GUTTERS ETC. FIXING BY SELF TAPPING SCREWS/L-J SS HOOKS. PPGL- PRE PAINTED GALVALUME STEEL SHEET ZINC COATING : AZ 120 PAINT COATING : REGULAR MODIFIED POLYASTER PAINTING PAINTING THICKNESS (TOP) : 25 MICRON PAINTING THICKNESS (BOTTOM) : 5-7 MICRON

PROVIDING MISCELLANEOUS MATERIAL NOT COVERED IN ABOVE ITEMS [CASH RECEIPT TO BE SUBMITTED]

SUPPLYING & FIXING OF 6 MM THICK TOP SIDE COLOUR COATED (RAL 9002 OR AS DIRECTED BY EIC) NON-ASBESTOS CEMENT CORRUGATED SHEETS REINFORCED BY ORGANIC FIBERS AND/OR INORGANIC SYNTHETIC FIBERS CONFORMING TO IS:14871 OF VARYING LENGTHS INCLUDING 8MM DIA. STAINLESS STEEL (SS 304) J OR L HOOK BOLTS WITH 50MM MINIMUM THREADED LENGTH, SS WASHERS, SS NUTS, CORNER PIECES, RIDGES, GUTTERS, CUTTING SHEETS TO SIZE AND SHAPE WHEREVER REQUIRED, NECESSARY M.S. PIPE SCAFFOLDING ETC. COMPLETE AS DIRECTED BY EIC. (LAPS SHALL NOT BE PAID EXTRA, SHEET COLOUR TO BE APPROVED BEFORE USE)

PROVIDING AND FABRICATING STRUCTURAL STEEL WORK IN ROLLED SECTIONS CONFIRMING TO IS 800 : 2007, FIXED WITH CONNECTING PLATES OR ANGLE CLEATS IN MAIN AND CROSS BEAMS, HIP AND JACK RAFTERS, PURLINS CONNECTINF TO TRUSS MEMBERS, JOISTS, CHANNELS, ANGLES, TEES ETC. AS PER DETAILED DESIGNS AND DRAWING OR AS DIRECTED INCLUDING CUTTING, FABRICATING, HOISTING, ERECTING, FIXING IN POSITION, MAKING RIVETED / BOLTED / WELDED CONNECTIONS AND ONE COAT OF ANTICORROSIVE PAINT AND OVER IT TWO COATS OF OIL PAINTING COMPLETE. (RCF WILL SUPPLY ONLY PAINT FREE OF COST AT RCF STORES.) RATE CALCULATION =Rs.97,759 - Rs.2,430 less for RCF paint supply = Rs. 95329 Note- If contractor is instructed for fabrication only i.e. item excluding erection only then the rate is reduced by Rs. = 8000.00 per MT.

FIXING OF NEW/OLD RCF ISSUED SHEETS (ASBESTOS / FIBER / METAL SHEETS) AS PER EXISTING PATTERN BY NEW SS- L & J- SHAPE HOOKS (S.S. HOOKS SHALL BE PAID SEPARATELY IN ITEM BELOW) WITH CAREFULLY SHIFTING/SLIDING OF OLD SHEETS. STACKING OF OLD USABLE MATERIALS & DISPOSAL OF DEBRIS WITHIN FACTORY PREMISES AS DIRECTED BY EIC.

REMOVING OLD SHEETS (ASBESTOS / FIBER / METAL SHEETS) WITH CAREFULLY SHIFTING/SLIDING OF OLD SHEETS. STACKING OF OLD USABLE MATERIALS & DISPOSAL OF DEBRIS WITHIN FACTORY PREMISES AS DIRECTED BY EIC.

SUPPLYING S, L & J- SHAPE SS HOOK FOR IS SECTION; MOC= SS 304; DIA.= 8 MM; MINIMUM THREADED LENGTH 50MM INCLUDING EPDM ROUND WASHER / SS ROUND WASHER / SS NUT & PVC CAP ETC. AS DIRECTED BY EIC.

SUPPLYING S, L & J- SHAPE PVC COATED, DIA.= 8 MM; MINIMUM THREADED LENGTH 50MM INCLUDING EPDM ROUND WASHER AND PVC COATED NUT & PVC CAP ETC. AS DIRECTED BY EIC.

LOADING, UNLOADING, TRANSPORTATION OF OLD STRUCTURAL STEEL WITHIN FACTORY PREMISES AND STACKING IT WITHIN RCF THAL FACTORY PRIMISES AS PER DIRECTED BY EIC.

PROVIDING DESIGN AND DRAWING SERVICES AND STABILITY CERTIFICATION FOR STRUCTURAL STEEL SHEDS AS DIRECTED BY EIC WITHIN RCF THAL PREMISES (FACTORY AND TOWNSHIPS).