Rashtriya Chemicals And Fertilizers Limited Tender

REMOVING DOORS AND WINDOWS WITH FRAMES AND STACKING THE MATERIALS AND DISPOSAL OF UNSERVICEABLE WITHIN A LEAD OF 3 KM., COMPLETE AS DIRECTED BY ENGINEER-IN-CHARGE

DISMANTLING THE R.C.C. /PCC WORK AND SORTINGOUT THE MATERIALS SUCH AS STEEL ETC. AS DIRECTED AND STACKING AND DISPOSAL OF UNSERVICEABLE WITHIN A LEAD OF 3 KM., COMPLETE AS DIRECTED BY ENGINEER-IN-CHARGE

REMOVING CEMENT TILES, OR MARBLE OR POLISHED SHAHABAD FLOOR OR DADO WITHOUT BED CONCRETE INCLUDING STACKING THE MATERIALS AS DIRECTED WITH ALL LEADS, LIFTS ETC. COMPLETE

PROVIDING AND LAYING PLAIN CEMENT CONCRETE M-15 (1 CEMENT: 2 FINE AGGREGATE :4 GRADED STONE AGGREGATE 20 MM NOMINAL SIZE), MANUAL / MACHINE MIXED AND MANUAL / MECHANICALLY VIBRATED IN FOUNDATIONS,SUPERSTRUCTURE FOR UNDER FLOORS, SCREEDING, COPING AS PER EIC ETC., INCLUDING ALL NECESSARY COST OF CENTRING AND SHUTTERING, COVER BLOCKS & CURING ETC. COMPLETE.

SUPPLYING, CUTTING, BENDING, HOISTING, PLACING IN POSITION AND BINDING WITH 18 SWG ANNEALED WIRE, HYSD FE-500 STEEL REINFORCEMENTS AS PER RELEVANT IS CODE FOR ALL R.C.C. WORKS INCLUDING ALL NECESSARY HANDLING AT ALL HEIGHTS AND DEPTHS COMPLETE IN ALL RESPECTS AND AS PER DIRECTION OF THE ENGINEER-IN CHARGE.

PROVIDING AUTOCLAVED AERATED CONCRETE BLOCK MASONARY OF CONFORMING TO IS:2185(PART3)-1984 IN EXTRA FINE JOINTING MORTAR OF FIXOBLOCK OF ULTRA TECH OR EQUIVALENT IN IN FOUNDATION PLINTH AND SUPERSTRUCTURE INCLUDING STRIKING JOINTS, RAKING OUT JOINTS AND SCAFFOLDING WORK, WATERING, CLEANING AND THE BLOCKS BEFORE USE , CURING FOR 7 DAYS ETC ETC. ALL COMPLETE AT ALL HEIGHTS / DEPTH. ETC. COMPLETE AS SPECIFIED AND AS DIRECTED.

PROVIDING AT ALL HEIGHTS 12 MM THICK CEMENT PLASTER ON BRICK WORK, EXPOSED SURFACES OF RCC LINTELS, BEAMS, ETC IN CEMENT SAND MORTAR 1:4 (1CEMENT:4 PACKED BAG SAND) USING PACKED BAG SAND IINCLUDING NECESSARY SCAFFOLDING, CURING ETC. COMPLETE.

PROVIDING & FIXING OF GI METAL LAY IN MICRO PERFORATED OF ARMSTRONG OR EQUIVALENT MAKE (1.8MM DIAMETER-20% OPEN AREA) METAL CEILING CONSISTING OF 600X600MM LAY IN TILES IN 0.7 MM THICK GI METAL PRE COATED TO GLOBAL WHITE COLOR WITH ACOUSTICAL FLEECE HOT PRESSED ON THE BACK OF THE PERFORATED TILE & 50 MM THK. RESIN BONDED GLASS WOOL BACKING TO BE LAID ON ARMSTRONG GRID SYSTEMS WITH 24MM WIDE T - SECTION FLANGES COLOR WHITE HAVING ROTARY STITCHING ON THE MAIN RUNNER, 1200 MM & 600 MM CROSS TEES. THE TILES WOULD HAVE NRC OF 0.50, FIRE PERFORMANCE OF CLASS A2-S1.D0 AS PER EN13501 STANDARD IN MODULE SIZE OF 600 X 600MM, SUITABLE FOR GREEN BUILDING APPLICATION, WITH RECYCLED CONTENT OF 50%. THE TILE SHALL BE LAID ON 24 MM WIDE T - SECTION FLANGES COLOUR WHITE HAVING ROTARY STITCHING ON ALL T SECTIONS I.E. THE MAIN RUNNER, 1200 MM & 600 MM CROSS TEES WITH A WEB HEIGHT OF 30MM AND A LOAD CARRYING CAPACITY OF 15.34KGS/M2& PULL OUT STRENGTH OF 100KGS. THE T SECTIONS HAVE A GALVANIZING OF 90 GRAMS PER M2 AND NEED TO BE INSTALLED WITH SUSPENSION SYSTEM.

METAL FRAMED SUSPENDED CEILING (SEAMLESS): MAIN SYSTEM: METAL FRAMED SUSPENDED CEILING COMPRISES OF G.I PERIMETER CHANNEL HAVING 0.55MM THICKNESS, TWO UNEQUAL FLANGES OF 20 AND 30MM AND WEB OF 27MM IS FIXED TO SURROUNDING WALLS / PARTITION USING NYLON SLEEVES AND SCREWS AT 450MM CENTERS. THEN INTERMEDIATE CHANNEL (0.91MM THICK) HAVING TWO EQUAL FLANGES OF 15 MM. EACH AND A WEB OF 45MM IS SUSPENDED FROM THE SOFFIT AT 1220 MM CENTER WITH CEILING ANGLE OF WIDTH 25MM X 10 MM X 0.55 MM THICK, FIXED TO SOFFIT AT 1220MM CENTRE WITH G.I CLEAT AND STEEL EXPANSION FASTENERS. CEILING SECTION OF 0.55MM THICKNESS HAVING KNURLED WEB OF 50.5 MM AND FLANGES OF 26MM EACH WITH LIPS OF 10.5MM ARE THEN FIXED TO THE INTERMEDIATE CHANNEL WITH CONNECTING CLIPS ACROSS TO THE INTERMEDIATE CHANNEL, AT 457MM CENTERS. 8MM THICK SQUARE/TAPERED EDGE HILUX BOARDS OR EQUIVALENT ARE THEN SCREW FIXED ACROSS THE CEILING SECTIONS WITH 25MM LONG SELF DRILLING & TAPPING SCREWS HAVING PHILLIPS HEAD WITH UNDER HEAD CUTTER, FOR FIRST AND SECOND LAYER RESPECTIVELY, AT 200MM CENTERS. JOINTING AND FINISHING: THE JOINTS OF THE FACE BOARDS ARE FINISHED WITH SPECIALLY FORMULATED JOINTING COMPOUND AND 48MM WIDE FIBRE TAPE TO PROVIDE SEAMLESS FINISH. CEMENT PRIMER (OIL BASED) TO BE PROVIDED ON ENTIRE SURFACE BEFORE PUTTY/ PAINTING. NOTE:G.I. PERIMETER CHANNEL AND SUPPORTING MATERIALS ARE TO BE PROVIDED TO MAKE ANY OPENING FOR LIGHT FITTINGS, DIFFUSERS ETC. AND SHOULD BE SUPPORTED PROPERLY TO MAINTAIN THE INTEGRITY OF THE CEILING, AND SHOULD BE CHARGED EXTRA.

SUPPLYING, FITTING & FIXING IN POSITION FULLY OR PARTLY GLAZED SINGLE LEAF ANODIZED ALUMINUM DOORS OF APPROVED SHADE MADE UP FROM ALUMINIUM EXTRUDED SECTIONS GLAZED WITH 5.0 MM THICK PLAIN GLASS FIXING WITH SPECIAL GASKET, BEADING, LOCK & ALL NECESSARY FIXTURES AND FASTENINGS ETC. COMPLETE AS PER SPECIFICATIONS, DRAWINGS AND DIRECTION OF ENGINEER-IN-CHARGE. (DETAIL MATERIAL SPECIFICATION WILL BE AS FOLLOWS)I) 15 TO 16 GAUGE THICK AL SECTIONS. (DOOR BOTTOM RAIL 95X44 MM, LOCK RAIL 50X44 MM, TOP & VERICAL RAIL 47X44 MM) II) ALUMINUM ANGLE-16 GAUGE III) 6 MM THICK PLY WOODS/3.5 MM THICK HARDNER SHEET IV) 28 GAUGE ALUMINUM SHEET.

SUPPLYING AND FIXING IN POSITION ANODIZED ALUMINUM SECTION TWO TRACK SLIDING WINDOWS WITH MOSQUITO PROOF JALI (WITHOUT BOX FRAME MADE) UP OF THREE TRACK DRAIN BOTTOM SECTION OF SIZE 92 X 31.75 X 1.3 MM THICK (WT. 0.637 KG/M) AND TOP AND SIDES SECTIONS OF SIZE 92 X 31.75 X 1.3 MM THICK (WT. 1.07 KG/M). THE SHUTTER SHOULD BE OF BEARING BOTTOM OF SIZE 40 X 18 X 1.25 MM THICK (WT. 0.417 KG/M), TOP MEMBER OF SIZE 40 X 18 X 1.25 MM (WT. 0.417 KG/M) THICK, INTER LOCKING SECTION SIZE OF 40 X 18 X 1.25 MM THICK (WT. 0.469 KG/M) AND HANDLE SECTION SIZE OF 52 X 18 X 1.13 MM THICK (WT. 0.488 KG/M) SELECTED QUALITY 5 MM THICK CLEAR GLASS TO BE FIXED IN SHUTTER WITH NEOPRENE GASKET WITH APPROVED QUALITY PVC ROLLERS NECESSARY LOCKS HANDLES PVC LINING AND WOODEN ENCASEMENT WHEREVER NECESSARY ETC. COMPLETE AS DIRECTED BY EIC.

PROVIDING AND LAYING TELEPHONE BLACK / AMBA WHITE / CADBURY BROWN / RBI RED / OCEAN BROWN GRANITE STONE OF 15 TO 20 MM THICK FOR DOOR FRAME / DADO / WINDOW BOXING / PLATFORM OTTA ETC. ON C.M. 1:6 INCLUDING FILLING JOINTS WITH POLYMER BASE FILLER NOSING THE SHARP EDGES WHEREVER NECESSARY, CURING, ETC. COMPLETE..

PROVIDING AND FIXING ISI MARKED HYDRAULIC DOOR CLOSER (80 TO 90 KG CAPACITY) FOR ALUMINIUM DOORS/WOODEN DOORS AS DIRECTED BY EIC.

PROVIDING AND APPLYING PRIMING COAT ON CONCRETE/ MASONARY/ ASBESTOS CEMENT PLASTERED SURFACES INCLUDING SCAFFOLDING IF NECESSARY, PREPARING THE SURFACE BY THOROUGHLY CLEANING OIL, GREASE, DIRT AND OTHER FOREIGN MATTER AND SAND PAPERING AS REQUIRED ETC. COMPLETE.

PROVIDING AND APPLYING PLASTIC EMULSION PAINT OF APPROVED QUALITY, COLOUR AND SHADE TO OLD AND NEW SURFACES IN TWO COATS INCLUDING SCAFFOLDING, PREPARING THE SURFACE. (EXCLUDING THE PRIMER COAT)ETC. COMPLETE.

PROVIDING AND APPLYING POLYMER MODIFIED CEMENT MORTAR (PMM) / MICRO CONCRETE JACKETING, RCC REPAIRS, ETC. TO WALLS OF THICKNESS UPTO 75 MM USING POLYMER MODIFIED CEMENT PREMIXED QUARTZ SAND AGGREGATE PACKED IN BAGS OF STANDARD MANUFACTURE, FOR HIGH EARLY STRENGTH OF 40 N /MM SQ.CM OF APPROVED BRAND. THE DRY PRODUCT IS TO BE MIXED WITH 12.5% WATER BY WEIGHT, ALONG WITH WASHED AND POURED INTO RIGID FORM WORK MOULDS & TAMPED PROPERLY, & CURED FOR 3 DAYS. [PAYMENT IS TO BE MADE BY WEIGHT PREMIXED OF MICRO CONCRETE PRODUCT CONSUMED AS PER SITE REGISTER RECORDS. NO EXTRA PAYMENT SHALL BE MADE FOR SHUTTERING OR ANY OTHER MATERIAL.]

PROVIDING AND LAYING MIRROR / GLOSSY / MATT FINISH VITRIFIED TILES OF SOMANY / RAK / KAJARIA / NITCO / JHONSON (590-600 MM X 590-600 MM OR GREATER SIZED AS DIRECTED BY EIC) OF APPROVED QUALITY, SHADE AND PATTERN FOR DADO AND SKIRTING IN REQUIRED POSITION LAID ON A BED OF CEMENT MORTAR 1:4 INCLUDING CEMENT FLOAT JOINT FILLING WITH WHITE/COLOUR CEMENT SLURRY, CLEANING, CURING INCLUDING MAKING EXISTING FLOOR SUITABLE TO FIX NEW TILES IN PROPER LEVEL ETC. COMPLETE AS INSTRUCTED BY EIC.

PROVIDING AND APPLYING TWO COATS OF WALL CARE PUTTY OF 2 MM THICKNESS FOR PLASTERED SURFACE TO CEILING AND WALLS TO PREPARE SURFACE EVEN AND SMOOTH OF BRANDS BIRLA WHITE, BERGER, BISION, J.K. OR EQUIVALENT MAKE ETC. COMPLETE.

PROVIDING, SUPPLING & FIXING 12MM THICK SINGLE LEAF TOUGHNED GLASS DOOR OF SAINT GOBAIN/MODI/ASAI MAKE WITH 6/8" AS DIRECTED POLISHED WOODEN PATTI AT TOP & BOTTOM. THE GLASS DOOR SHALL BE MADE OPERATABLE ON FLOOR SPING OF ENOX/OMEGA MAKE & CAPABLE TO TAKING ITS LOAD WITH OTHER PATCH FITTINGS SUCH AS LOCK, BOTTON & TOP PATCH, PIVOT, 2' HIGH SS FINISH HANDLEON BOTH SIDES, PUSH/PULL INDICATOR, ETC. THE DOOR MAY ALSO HAVE SS FINISH BRASS MAKE STOPPER FIXED ON TOP IF REQUIRED.

SUPPLYING AND PASTING GARWARE OR EQUIVALENT POLYESTER FILM, OF APPROVED COLOUR & REFLECTIVE RANGE OVER GLASS PANES AT ALL ELEVATION INCLUDING PREPARATION OF GLASS, SPRAYING OF CHEMICAL OVER GLASS, PRESSING OF FILM BY WIPER WITHOUT ANY BUBBLES DONE BY A PROFESSIONAL AGENCY COMPLETE TO THE SATISFACTION OF ENGINEER-IN-CHARGE.

PROVIDING AND FIXING MISC. MATERIALS NOT COVERED IN THE SCHEDULE OF RATES INCLUDING TRANSPORTING, LOADING, UNLOADING AT SITE ETC. (CASH RECEIPT TO BE SUBMITTED). NOTE: 20% EXTRA SHALL BE PAID OVER BASIC RATE OF CASH MEMO.