Pune University Tender

Providing and fixing in position glass door (900x2100) of 12mm thick toughened glass of Modigaurd or equivalent alongwith the holes required for fising fittings, including floor hinges of ozone or equivalent, top/bottom patch fitting, patch lock and top pivot fitting including scrapping for fixing the floor hinge, cleaning , including application of froasted films as per pattern given by architect etc complete,

Providing Glass in Partiotion of 10 mm thick with D brackets

Wooden Partitions Part height - Providing & Fixing in position 3" thk. wooden partition, including 2"x2" Salwood frame work and covering with 6mm. ply & 1.0 mm. thk laminate on both sides/ 3 mm thk MDF, insertion of T.W. member whereever necessary, cutting of holes to partition, provision for electrical conduits, 6mm. ply for skirting with 1.5 mm. laminate covering of approved colour & shade, providing additional angle supports wherever necessary for standalone partitions and additional strengthening wherever necessary, including luster paint of approved shade if MDF is applied wherever / all over as applicable etc item complete.

Providing and fixing wall panelling made out of 19 mm ply box finished with 1.5 mm thk laminate amd 6 mm think lipping on exposed sides as per instructions including making holes, finsing arrangements, making provisions required for lighting , polishing the exposed edages, cleaing etc complete

Toughened glass partition works: The scope of work includes Providing, supplying, fabrication and installation or fixing of toughened glass (10-12m thick) to the various locations with the accessories like powder coated aluminium fish mouth channel at top & bottom, labour, distance between two glass panels not exceed 2mm to 4mm, sealing of gap filling (wall to glass magnetic seals, glass to glass central weather seals etc clear PU sealant or silicon), etc. (at all level/floors/height) which are necessary for completion of job as directed by engineer in charge.

Providing & Fixing in position, FR grade Fabric wrapped Compressed polyester fibre nonwoven 9mm panels above the wood wool board paneling or existing sal wood frame, using adhesive, as per Architectural & Acoustical Design & Instructions & Complete in all aspects as directed by the engineer in charge.

Providing and fixing in position Gypsum board false ceiling with 12.5 mm thick Gypsum boards, screwed/fixed to the under structure of suspended G.I. Grid constructed and suspended from the main ceiling consisting of ceiling sections of size 25 x 50 mm maximum center to center distance of 600 milimetre perimeter channel and intermediate channels at maximum center to center distance 1200 milimetre galvanized grid should be fixed toreinforced cement concrete slab. The gypsum board should be fixed to galvanized iron grid with necessary screws. The boards should be taped and filled from underside to give smooth, seamless ceiling. The rate should include necessary additional ceiling sections and intermediate channels. Additional intermediate channels should be fixed to strap hangers for additional support to prevent strapping at every 1200 milimetre item tobe completed in all respect including necessary sleeves for ducts finishing of joints cut outs, painting including labour, material, lifts etc. all complete.

Providing & Fixing of Armstrong Soft Fibre Acoustical Suspended Ceiling System with Optra (Bevelled Tegular) Edge Tiles With Armstrong 15mm Exposed Grid. The tiles should have Humidity Resistance (RH) of 95%, NRC 0.9 - 1.0, Light Reflectance ≥85%, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module size of 600 x 600 x 15mm , suitable for Green Building application, with Recycled content of 66% (GW) and 74 % RW. The tile shall be laid on precoated G.I channel 32 with 15 mm wide T-section flanges colour white having rotary stitching on all T-sections i.e. the Main Runner, 1200 mm and 600 mm Cross Tees with a web height of 32 mm and aload carrying capacity of 7 Kilograms/M2 with aminimum pullout trength of 100 Kilograms. The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system. The Tile and Grid system used together should carry a 1 year warranty. products approved as per GRIHA and BS 476 etc. complete.

Providing & Fixing of Armstrong Soft Fibre suspended Ceiling System with Optra (Bevelled Tegular) Edge Tiles With Armstrong 15mm Exposed Grid. The tiles should have Humidity Resistance (RH) of 95%, NRC 0.9 - 1.0, Light Reflectance ≥85%, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module size of 600 x 600 x 15mm , suitable for Green Building application, with Recycled content of 66% (GW) and 74 % RW. The tile shall be laid on precoated G.I channel 32 with 15 mm wide T-section flanges colour white having rotary stitching on all T-sections i.e. the Main Runner, 1200 mm and 600 mm Cross Tees with a web height of 32 mm and aload carrying capacity of 7 Kilograms/M2 with aminimum pullout trength of 100 Kilograms. The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system. The Tile and Grid system used together should carry a 1 year warranty. products approved as per GRIHA and BS 476 etc. complete.

Providing & Fixing Soild core hot pressed , phenol formaldehyde bonded boiling proof 40mm thick marine plywood door frame Citicom 710 / Green Club 500 / CPL 710 or equivalent make on both side gypsum face, seasoned calibrated & chemically treated as per IS 710 standard one side laminate of approved colour shade & design and width i/c fixing as per manufactures specification all and Hilti fastner 100mm long 10 nos each side embedded in masonry including 75x12 mm marineply cover mould with teak wood lipping on both sides etc. complete as per direction of Engineer in Charge. Size = 300mm x 40 mm

Providing & fixing solid core flush door in single / double leaf 35mm thick decorative type of exterior grade as per detailed drawing & design including approved mica face on both face (1.5mm thick), fittings, Brass oxidised fixtures (Aldrops, Handles, Tower bolts, Hinges) of approved make and size as specified in the drawing including all necessary beads, moulding, lipping, french polish etc. complete. (without door frame). Spec. No.BD.T.34 Page No. 499.

Providing and fixing solid core Flush door shutter in single leaf 32 mm thick decorative type of exterior grade of approved face veneers 4 mm thick on both faces or as directed, including all necessary beads, mouldings and lipping, S.S.hinges, chromium plated fixtures and fastenings,handles on both sides finishing with Melamine Polish as per detailed Architectural Disign & Drawings etc. Complete in all aspects. Specification No: As directed by engineer in charge

Providing and fixing in position 30mm. Thick solid commercial flush door shutters, single/double shuttered, waterproof & termite proof as per Indian standard specification (Century ply make) including providing 30 X 20mm. T.W. lipping all around and both side 1mm thick laminate (Century / Greeenlam make) with three coats of fresh polish of approved color on top & vertical thickness, for bottom thickness with one coat of primer and two coats of approved satin paint (Asian / ICI make), all shutters tested for smooth easy operation etc. all as per architectural drawings & details etc. complete. Actual flush door size will be paid (The rate is including all hardware schedule as per each type) Hinges - 4 Nos. Handle A - 2 Nos. Aldrop - 1 No. Tadipatti - 1 No. Towerbolt - 1 No. Doormagnet - 1 No. PVC - Stopper - 1 No. Hardware Schedule Hinges - 100mm long ( 4 x 12mm ) S.S. Hinges , Handle A - 200mm long and 19mm thick SS Handles , Handle B - 150mm long and 19mm thick SS Handles ,Aldrop - 250mm long & 12mm dia.S.S. Aldrop, Tadipatti - 200mm long & 12mm dia. S.S.Tadipatti of Baby latch - S.S Baby latch ,Tower bolt - 200mm long S.S.Tower bolt 200 x 10mm Doormagnet - S.S. Door magnet ,PVC - Stopper - PVC door Stopper ,72 mm bell type. Spec. As directed by Engineer in charge. Make for hardware fittings - Super Suzu/hittech/hafele/godrej/ EBCO/Fitji/Kich /Plus point make

Providing & fixing Hardware of approved brand and make to doors as directed on drawings, including all necessary fitting etc. complete. Door closer (Hyper). Spec. As directed by Engineer in charge.

Providing and fixing fiber glass reinforced polyster door shutter 35 mm thick as per IS 14856 (2000) (Reaffirmed 2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, etc. complete. Spec. As directed by Engineer in charge.

Providing and applying Royale Luxury Emulsion of approved make on internal wall surface as detailed below Scrapping for surface with emery paper and wipe clean for area. wall primer with brush by adding mineral turpentine oil by 8 to 10 % or water by 15 to 20% allowing to dry for 6 to 8 hoursAfter applying acrylic wall putty with appropriate prpportion of water of allow to dry for period of 4 to 6 hours of activity. Scrapping with emery paper and wipe clean Applying paints Royale Luxury emulsion 1st coat with brush water content water 40 to 45% or 65 to 70% by role Applying paints Royale luxury emulsion 2nd coat with brush with water content 40 to 45% or 65 to 70 % by roller. (With prior approval of S.E.)

Providing and applying two coats of APEX exterior weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface ,applying primer coat ,scaffolding if necessary, and watering the surface for two days etc complete.NOTE: For Item No. 15 to 18 prior approval of Superintending Engineer will be necessary

Providing and applying 2 coats of flat oil paint of approved colour and shade to internal / external plastered surfaces including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) complete.Spec. No.: Bd.0.7 Page No. 406

Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) etc. complete.

Providing and applying pearl / luster finish paint of approved colour and shade to the existing plaster surface including scaffolding, preparing the surface, applying the acrylic wall putti etc. & including the priming coat on concrete / masonary / Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete.

Providing and applying plastic emulsion paint of approved quality, colour and shade to old and new surfaces in two coats including scaffolding, preparing the surface including the priming coat on concrete / masonary / Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required & including two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete.

Providing and making Holes (Core cutting ) in chajjas and slab for passing the pipe line. Spec. No: - As directed by Engineer in charge

Providing and making Holes (Core cutting ) in U.C.R. wall for passing the pipe line. Spec. No: - As directed by Engineer in charge

Material Shifting by truck Spec. No: - As directed by Engineer in charge

Roller BLINDS P& F roller blinds of Vista Levolor / MAC make with 100% opacity with necessary fixing and operating arrangement - Higher quality

Roller BLINDS P& F roller blinds of Vista Levolor / MAC make with 100% opacity with necessary fixing and operating arrangement - standard quality

Providing & fixing in position Fabric Curtains for Windows as approved by the University including stitching & track etc. Complete. Spec.: As directed by engineer in charge

Providing & fixing Student Benches, DD-30 IM- Overall Dimentions:- L:-1054 X W980 X 760 mm Ht. Knock down class room dual desk is specially designed for rugged use. all edges are fillet. The desk are made of pressed formed MS CRCA section & CRCA tube fitted with Plywood with lamination on both sides and 2mm PVC Edgebanding top, seat & back with injection molded PPCP edge. Hanger for water bottle and bag. Space for keeping pen, pencil and scale. The overall appearance of the product shall be as per photograph. Top- Injection molded PPCP edge. Size :- 1054x450x18 MM thk. Particle Board. Seat- Injection molded PPCP edge. Seat height :- 450 MM , Seat size :- 1054x304x18 MM Thk. Particle board.Back- Injection molded PPCP edge. Back size :- 1054x154x18 MM Thk. Particle board. Shelf- Shelf 0.8 MM Thk. CRCA sheet. Bullnose front edge with stiffner 1 MM Thk CRCA. Modesty- Modesty 0.8 MM Thk. CRCA sheet. Square perforation. Tie members- Horizontal Tie members 25x25x1.6 MM thk. CRCA Pipe. For rigid joint of frame structure threaded 4 mm thick sleeve welded in tie members. Round pipe & Tie members joined together via notching in square pipe for matching of profile on round & square pipe in Seat & Back. Footrest- Footrest pressed formed CRCA section 1.5 MM Thk. Side frame- Side frame C - section pressed formed 1 mm thk.CRCA Sheet welded with 25x50x1.2 MM thk tube. And back rest pipe Ø25 x 1.6 MM thk. Back rest upper mouth has been closed with welded metal cap for avoiding sharp edges.Cap & Levellers- All pipe caps are curved PPCP material. Provision for levellers in the cape.4 nos of PVC Grommet has been provided at bottom for preventing scratches on floor & Product as well. Construction- The product comes in knock-down conditional for ease of transportation. Finish- No sharp edges in the prodect. All steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface.

CHAIRS - type 1 for HOD and heads full back with headrest SEAT/BACK ASSEMBLY: The Cushioned seat assembly consshould be ts of seat outer (material-30% Glass Fiber Nylon)& upholstered Seat inner (material- Poly Propylene) with moulded Polyurethane foam & polyster fabric. The Net Back should be made up of Back outer (material-Glass Fiber Filled Nylon)& Back inner (material- PP) and upholstered using Polyester Mesh fabric with high tenacity yarn. Full Back Size: 46.5 cm. (W) x 60.0 cm. (H) Seat Size : 51.0 cm. (W) x 49.0 cm. (D)HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR Polyurethane foam should be moulded with density = 45 +/- 2 kg/m³ and Hardness load 12 +/- 2 kgf for 25% compression. BACK SPINE: The support spine should be made up of High Pressure Die cast polished hed Aluminum.ARMRESTS : The armrest should be having two adjustment, Height (6.0±0.5cm) and Depth (6.0±0.5cm). Height adjustment should be provided in Aluminum structure of armrest which should be connected to Aluminum Back spine and should be operated by button. The depth adjustment should be provided in pad which should be fixed to armrest structure. Armrest Top should be made up of PU molded over plastic inner.ACTIVE BIO-SYNCHRO mechanism: The adjustable tilting mechanism should be designed with the following features:• 360° revolving type• Front-pivot for tilt with feet resting on ground & continuous lumber support ensuring more comfort• Tilt tension adjustment can be operated in seating position• 5 position Tilt limiter giving option of variable tilt angle to the chair• Seat / back tilting ratio of 1:2• The mechanism housing should be made up of HPDC Aluminum & black powder coated (DFT 40 to 60 micron)SEAT DEPTH ADJUSTMENT: Seat depth adjustment should be integrated in the seat through a sliding mechanism. Seat depth adjustment range should be of 3.75±0.1 cmLUMBAR SUPPORT ASSEMBLY: The Lumbar support assembly should consist of lumbar spine (material-Glass Fiber Filled Nylon) which should be fixed to Aluminum Back spine. The Lumbar pad (material- Poly Propylene) should be fixed to lumbar spine through lumbar Pad support. Lumbar Support Assembly has height adjustment of 5.0±0.5cm.PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 10.0 ± 0.3cm.PEDESTAL ASSEMBLY WITH CASTORS:The pedestal should be High Pressure Die cast polished Aluminum and fitted with 5 nos. twin wheel castors. The pedestal should be 65.0 ± 0.5cm. pitch-center dia.(75.0 ± 1.0cm. With castors.)Headrest :The neckrest assembly consshould be ts of upholstered Neckrest inner(material-PolyPropylene) with moulded Polyurethane foam and Polyster fabric.Upholstered inner should be fixed to Neckrest cover.Neckrest should be fixed to Back assembly through Neckrest spine .Neckrest assembly has height adjustment of 5.5 +/- 0.5cm and Rotation adjustment of overall 20° +/- 2°.TWIN WHEEL CASTORS: The twin wheel castors should be injection moulded in black PP having 6.0± 0.1cm wheel Diameter.Overall Dimensions of ChairSeat Height - min 45.5 to max 55.5cm.Height - min 95.5 to max 105.5 cm.Width & Depth of Chair as measured from pedestal - Width-75.0 cm and Depth-75.0 cm

Supply of CHAIRS - type 2 for faculty and dicussion rooms - high back SEAT ASSEMBLY: The seat assembly should be made up of 1.2 ±0.1cm. thick hot-pressed plywood, upholstered with fabric upholstery covers and moulded Polyurethane foam.SEAT SIZE: 47.0 cm. (W) x 48.0 cm. (D). BACK ASSEMBLY: The back asembly. should be made of powder coated (OFT 40-60 microns)tubular frame of 0 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. MS ERW tube designed with contoured lumbar support for extra comfort. The back should be upholstered using double layer spacer mesh fabric with high tenacity yarn.BACK SIZE : 46.5 cm (W) x 70.5 cm (H).HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam should be moulded with density =45+/-2 kg/m3 and hardness load 16 ± 2 kgf for 25% compression.ARMRESTS: The one-piece armrests should be injection moulded from black Co-polymer Polypropylene. CENTRE-TILT mechanism: The mechashould be m should be designed with the following features:• 360° revolving type.• 17° ±2° maximum tilt on pivot at centre • Upright position locking. Tilt tension adjustment. .PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 11.0 ±0.3cm.TELESCOPIC BELLOW ASSY: The bellow should be 3 piece telescopic type and injection moulded in Black Polypropylene. TELESCOPIC BELLOW ASSY: The bellow should be 3 piece telescopic type and injection moulded in Black Polypropylene.PEDESTAL ASSEMBLY: The pedestal should be injection moulded in black 33% glass-filled Nylon66 and fitted with 5 nos. twin wheel castors. The pedestal should be 66.3 ±0.5cm. pitch-center dia. (76.3 ±1.0cm with castors.)TWIN WHEEL CASTORS: The twin wheel castors should be injection moulded in black nylon.Overall Dimensions of ChairSeat Height - min 43.3 to max 54.3cm.Height - min 99.5 to max 110.5cm. Width & Depth of Chair as measured from pedestal - Width-76.3 cm and Depth-76.3 cm.

Executive High Back Chair :- Supply of High Back Revolving Chair with Syanchro knee tilt mechanisum with Multiangle Locking System attached head rest to mesh nylon Frame back with 45 Density moulded foam netted tepestery Class 4 Gas Lift with Alluminium dia cast base and nylon twin Wheels. As directed by Engineer in Charge. (As per drawing & Specification attached on annexture I)

Faculty Chair :- Supply of netted high back revolving chair, with gaslift & crome plated base with twin nylon casters, netted back with adjustable lumber support & adjustable head rest, back made up of nylon frame with nylon mesh support, with 32 density P U foam. seat is made up of 15 mm thick hot press ply with 50 density moulded foam covered with high quality nylon mesh with aster, metal adjustable handles with P U pad fitted to seat with inserts, tilting mechanisum with multiangle locking system fitted to seat with inserts.

Computer Chair :- Supply of low back revolving chair with gaslift & crome platted base with nylon twin casters, 50 density moulded foam with fabric netted tapestry at seat & 15 mm Hot press ply for seat. High quality nylon mesh with nylon frame at back, pp handles, push back mechanism with fornt locking system. As directed by Engineer in Charge. (As per drawing & Specification attached on annexture I)

Staff Chair :- Supply of medium back revolving chair, with gas lift, crome platted base with nylon twin casters, Tilting/push back mechanism with front locking system, nylon streep (Horizontal Lines) type frame with high quality nylon mesh at back moulded 50 density foam seat with fabric/leatherite uphostery at seat 15 mm hot press ply at seat with inserts for handle & mechanisum, tringle type pp handle As directed by Engineer in Charge. (As per drawing & Specification attached on annexture I)

Waiting Chair :- Same as above, but with fixed legs and without castors

Visitors (Ornet) Chair :- Supply of supreme/cello make plastic moulded chair with seat & back cushion with velvet cloth, lacquer finished frame gross weight of chair 4 KG 200 GM.

Providing & fixing in position CH1 type Chair for Green Rooms if approved by the University. Spec.: As directed by engineer in charge

Providing & fixing in position CH2 type Chair for Conference 1 WIPRO CODE ONM9019111021 9494 or equivalent if approved by the University. Spec.: As directed by engineer in charge

Providing & fixing in position CH3 type Chair for Conference 2 WIPRO CODE SMM5017111021or equivalent if approved by the University. Spec.: As directed by engineer in charge

Airport Multi Seater (3 Seater) Perforated Chairs/Sofa :- Supply of three seater CRCA sofa with crome plated handles & legs, crome plated side patti for fitting of seat & back, seat & back made up from 1.6 mm thick CRCA sheet duly silky silver powder coated, 76 mm x 38 mm x 1.25 mm thick powder coated center square pipe fitted to arms, legs & seating shell perforated hole size is 4 mm used for seating shell, approx weight is 32 KG +/- 2 % lenth is 1800 mm handle to handle, height from ground to top of back is 790 mm, height from ground to seat at front side 350 mm, height of ground to handle is 560 mm, depth from front to back of shell is 625 mm, crome plated adjuster are fitted to legs with rubber bush, inside shells are fitted to main frame with one angular bracket & crome nuts etc. complete as per drawing and as diretcted by engineer in charge.

airport multi seater (3 seater)- Supply of three seater Over all sizes- 1765mm X 710mm X 775mm (L X W X H). 3- Seater visitor bench with 3 individual seats of 450 mm. width.Made of MS cold rolled close annealed press formed Sheet components duly seamless welded to get proper finish. Steel perforated MS moulded one piece seat and back fitted in moulded chrome plated side strips. three individual seats fitted on MS tube support of 75mm x 35mm. seat and bottom support are Powder coated. The open- ends of the pipes will be covered& finished. All joints will be properly welded & finished. The whole structure including seats are powder- coated.

Reception Table:- Providing & fixing of Table (2300mm X 800mm X 750 mm) & (1200mm X 600mm X 750 mm) using plywood, Teakwood bidding/lipping Patti with Veneer & melamine finish from bothside, with top 6mm Glass toughened glass and 12mm Vertical Glass toughened glass in front portion, One side will have 4 drawers and 2 openable shutters with storage made out of 19 mm ply. keyboard drawer and full length foot rest made out of 19 mm ply as per detailed Design & Drawings etc. Complete in all aspects. (Refer detailed drawing & design) Specification No: As directed by engineer in charge.

Providing & fixing of Table (1200mm X 600mm X 750 mm) using plywood, Teakwood bidding/lipping Patti with Veneer & melamine finish from bothside as per detailed Design & Drawings etc. Complete in all aspects. (Refer detailed drawing & design) Specification No: As directed by engineer in charge. For Director

Providing & Fixing Lab Work Station 1500 X 600 X 750 with partition height 450 mm, with necessary supporting system, top with 19mm.plywood edges thicked with another 75 wide 18mm. ply to give thickness. 40mm covered with laminate 1.5mm of approved colour with necessary provision to 3 numbers 5AMP fix switches & sockets and one data point as directed on site etc

Providing & Fixing Working tables of size 2000x600+1200x600 with necessary supporting system , top with 25mm.plywood edges thicked with another 75 wide 18mm. ply to give thickness. 40mm covered with laminate 1.5mm of approved colour and necessary provision to fix switches & power point as directed on site etc. (As Per - modular furniture - Godrej Interio / wipro). Each side table will have 4 drawers and 2 openable shutters made out of 19 mm ply. Each main table will have a keyboard drawer and full length foot rest made out of 19 mm ply For Staff Area

Providing & Fixing Working tables of size 1500x600+900x600 or requied size with necessary supporting system , top with 19mm.plywood edges thicked with another 75 wide 18mm. ply to give thickness. 40mm covered with laminate 1.5mm of approved colour and necessary provision to fix switches & power point as directed on site etc. (As Per - modular furniture - Godrej Interio / wipro). Each side table will have 4 drawers and 2 openable shutters made out of 19 mm ply. Each main table will have a keyboard drawer and full length foot rest made out of 19 mm ply. Each table shall be provided with 450 high glass partition and 450 mm height divder cvred with 12m thk soft board' For Staff Area

Providing & Fixing Discussion tables of size 2000x900 or any other specified sizewith necessary supporting system , top with 25mm.plywood edges thicked with another 75 wide 18mm. ply to give thickness. 40mm covered with laminate 1.5mm of approved colour and necessary provision to fix switches & power point as directed on site etc. (As Per - modular furniture - Godrej Interio / wipro) meeting room

Conference table 14 seater, Overall Size- Length-6150mm, Width-2050mm, Height-750mm,or requied size Top made thick 25mm thick Plywood with lamination on both sides and 2mm PVC Edgebanding, Legs made of 25mm thick Plywood with lamination on both sides and 2mm PVC Edgebanding. Front Modestry Panel 18mm thick Plywood with lamination on both sides and 2mm PVC Edgebanding. All edges made of 2mm thick PVC edge bend. Over all appearance of product as shown in picture.

Conference table 14 seater, Overall Size- Length-6150mm, Width-2050mm, Height-750mm, Top made thick 32mm thickor requied size Plywood with Top veneer and lamination on bottom sides and BTC Wood for moulding Edge, Legs made of 25mm thick Plywood with veneer on both sides. Over all appearance of product as shown in picture.

Providing & fixing in position CT1 type Table for V.I.P. room WIPRO CODE EXMEET3030XXCC or equivalent if approved by the University. Spec.: As directed by engineer in charge

Providing & fixing in position CT2 type Table for V.I.P. room WIPRO CODE EXMEET2020XXCC or equivalent if approved by the University. Spec.: As directed by engineer in charge

Providing & fixing in position CT3 type Table for Conference 1 & 2 WIPRO KINGSLEY DISCUSSION DIA 1200 or equivalent if approved by the University. Spec.: As directed by engineer in charge

Providing & fixing in position Conference Table 20 Seater WIPRO CODE Group Think or equivalent if approved by the University. Spec.: As directed by engineer in charge.

Providing & Fixing storage unit (1.2x0.9x0.4) & 2.2x0.9x0.45, 400 mm to 450 mm deep and 0.90 m in height, 19mm. ply, shutters, brass hinges of approved make, covered with 1.50 mm laminate, magnetic ball catches, all internal surfaces oil painted, all edges finished with 1 mm laminet etc. complete as per detailed drawing & design

Providing & fixing in position Wooden finish Hanger Rack Godreg/Wipro make with caster or equivalent make if approved by the University. Spec.: As directed by engineer in charge

Book Rack: Providing and Supplying of Book Rack - 600 x 400 x 2000 milimetre. All Panels are made in 19 milimetre Both side 1.25 milimetre Laminate Color as per Selection. Provide 2 Drawer in This Dressing, All Tuching edge are cover with 2 milimetre Polynvinyl cloride Edge Banding. Fitted with necessary Hardware.

Sag Bag Rack :- @ 900LX 600DX 1965H Providing and Fixing Sag Bag Rack of size 900L X600D X1965H The Sag Bag Rack side panels and doors are made up of 19mm. plywood with both side laminate 1.5mm of approved colour. All exposed edges are sealed with 2mm thick PVC edge Banding. The shelves are made of 19mm. plywood with decorative laminate on both sides. The top is made of 19mm. plywood with decorative laminate on both sides. (19mm. plywood and 19mm. plywood on all sides to achieve 36mm overall thickness). The exposed edges of the top are sealed with 2mm thick PVC edge Banding. The top most part of the Sag Bag Rack has 5 No of Shelves made of 19mm. plywood has been considered. The Sag Bag Rack handles are Satin SS finish of 160 mm pitch. The Sag Bag Rack has a multipurpose lock of EBCO make. All hinges considered are Hettich make. Necessary good quality hardwares have been considered as required.

Shoe Rack :- @ 900LX 350DX 1965H Providing and Fixing Sag Bag Rack of size 900L X600D X1965H The side panels are made up of 19mm. plywood with both sides laminate 1.5mm of approved colour. All exposed edges are sealed with 2mm thick PVC edge Banding. The shelves are made of 19mm. plywood with decorative laminate on both sides. The top is made of 19mm. plywood with decorative laminate on both sides. The exposed edges of the top are sealed with 2mm thick PVC edge Banding. The Rack has 5 to 8 Shelves made of 19mm. plywood has been considered. Necessary good quality hardwares have been considered as required.

Providing and fixing Godrej make Optimiser as per specifications enclosed DRIVE Optimiser Drive has a unique mechanical design with an optimised speed ratio that reduces the force required to move multiple units at once. It makes the movement effortless. The Drive is suitable for medium to heavy load application areas. Drive Wheel: Locking Knob on Each Unit: Ventilation Ready: Centralized Locking: Wooden Platform 5 No of Shelves

Stage with Steps DAIS/ STAGE WITH STEPS : Providing and Supplying of Dais size - 5500 x 1600 x 300 or 450 milimetre Dais Frame Made in Mild Steel Pipe than Cover From all Side With 19mm. plywood with vinyl flooring Fitted with necessary Hardware

Providing & Fixing in position Podium size of 600mm X 600mm X 1275mmheight with specifications, table top, side and bottom 18 mm thick plylwood with fomica laminated sheeet and C.C.T.W. battens 25mm X 12 mm moulding, full length foot rest, full length Shelves. including all leads and lifts etc. complete as per drawing. Spec.: As directed by Engineer-In- Charge.

Sofa Set 3+1+1 Providing & fixing Sofa Set 3 + 1 + 1 Brown and Cream leather DIMENSION Length: 182.5 (cms) Breadth (cms): 100 (cms) Height (cms): 100 (cms) Weight (Kilograms): 66 (Kilogram) Seating Capacity: Five Seat

Providing & fixing in position SF1 type Sofa for VIP Room WIPRO CODE AL112LEBE2S or equivalent if approved by the University. Spec.: As directed by engineer in charge

Providing & fixing in position SF2 type Sofa for VIP Room WIPRO CODE AL112LEBE3S or equivalent if approved by the University. Spec.: As directed by engineer in charge

Providing & fixing in position SF3 type Sofa for Green Rooms WIPRO CODE GBFABW2S or equivalent if approved by the University. Spec.: As directed by engineer in charge

Providing & fixing in position SF4 type Sofa for Entrace Lobby WIPRO CODE Pause Chair or equivalent if approved by the University. Spec.: by As directed by engineer in charge

Providing and fixing 12 mm thick soft board (1.2mx1x0.4) covered with a fabric (base rate 300/rm) on a base of 12 mm think plywood finishing the same with 2 no - 100 mm wide horizontal members of 19 mm ply finished with laminate and polishing the edges and lipping with french polish, including making arrangements for fixing lights, passing conduits, fixing switches etc as per design complete

White board Providing & fixing in position whie board made out of 19 mm ply and 1.5 mm laminate - non glossy, marker grade including TW lipping on all sides finished with duco paint, including providing 0.6 mm laminate from back side cleaning etc all complete as per drawings.

Frosted film for glass partition: Supply & Installation of design film on glass partition as per approved design & approved. Design Film shall be Self- adhesive with bubble-free installation on clean glass.

Wooden Pelmet Providing and fixing in position pelmet out of 19mm thk BWP plywood with Laminate finish & finished with approved paint from inside. Size of the pelmet -150 mm x 300 mm. Item to be completed in all respects as per drawings & instruction from E.I.C. Item to be finished as per instructions of architect. Painting rate shall be included in this item.

Steel eching plate Providing and fixing Steel eching plate with of required size with eching letters on steel plate of 18 guage required size & grade 304 Spec - as directed by Engineer-in-charge.

Storewell cupboard with 4 Shelves and 5 compartments CRCA sheet, powder coated color H 78" X W 36" X D 18 Specifications:Dimensions in mm Height 1980mm Width 915mm Depth 455mm Thickness Millimetre 0.8 No of 4 Shelves ,Gray Color

Height - 1800 Millimeter (+/- 10 MM) Overall Width - 840 Millimeter (+/- 5 MM)Overall Depth - 400 Millimeter (+/- 3 MM) Number of Doors – 5 Nos. Type of Lock – 10 lever cam Lock Minimum Thickness of MS Sheet used for Top, Bottom, Back and Sides – 0.7 MM Number of Glass sheet fixed in each door - 1 Nos. Material of Doors – Minimum 5 mm thick Transparent Glass Sheet fixed in the MS Sheet Frame Finish - Synthetic enamel.

Supply, installation, testing and commissioning of Flat Interactive Panel and OPS with Bracket System:- 65" Flat Interactive Panel and OPS Display Specification - Size-65 inch, Panel Type- ADS, Back Light Unit- DLED, Response Time- 8ms, Aspect Ratio- 16.09, Display Area (HxV) - 1428.48x803.52mm, Pixel Pitch (HxV)- 0.372x0.372mm, Resolution- 3840x2160, Refreshing Frequency- 60Hz, Display Color- 1.07B, Bit Rate- 10 Bit, NTSC Gamut- 68%, Contrast Ratio- 1200:1, Viewing Angle- 178'(H/V), Brightness with glass (Min)- 400 cd/m2, Brightness with glass (Typ)- 450 cd/m2, Life Time 50,000 Hours Operating System - System Version- Android 11.0, RAM- 4GB, ROM- 32GB, CPU- A55x4, GPU- Mail G52MP2, Touch System- Sensing Type-Infrared Recognition, Touch Recognition- Finger,Passive stylus, Accuracy- ±1.5mm, Touch Point- 40, Minimum object Size- 3mm, Writing Height- 3mm, Supporting OS- Windows/Android/Linux/Mac OS X/Chrome Audio Output- 2.0, Output Power- 2x16w, Power Supply- 100-240V, 50/60Hz, Standby Power- ≤0.5W, Power Consumption (Typ/Max)- 160/320W. I/O Interface-HDMI In- 3, HDMI Out- 1, USB 2.0- 1, USB Type-C- 1, USB 3.0- 4, Touch Out- 2, VGA In- 1, Audio/MIC In- 1, Audio Out- 1, SPDIF- 1, RS232- 1, RJ45 In- 1, RJ45 Out- 1, Physical Specifications- Dimension (L×H×D)- 1488.4×896.6×87.2mm, Package Dimension (L×W×H)- 1628×208×1005mm, VESA- 600×400mm, Net Weight- 34.95Kg, Gross Weight- 44.70Kg, Accessories- Power Cord- 1, HDMI Cable- 1, USB Touch Cable (Type A-B)- 1, Remote Control- 1, Writing Pen- 2, Environmental Conditions-Operation Temperature- 0° C ~ 40° C, Operation Humidity- 10% ~ 90%RH, Storage Temperature- -20° C ~ 60° C, Storage Humidity- 10% ~ 90%RH, Altitude- Below 5000 Meter Optional PC Module-PC Module- OPS62A, Wireless Module- SI07, Certification-BIS, EMC, CE, FCC, UKCA

75" Flat Interactive Panel and OPS Display Specification - Size-75 inch, Panel Type- ADS, Back Light Unit- DLED, Response Time- 8ms, Aspect Ratio- 16.09, Display Area (HxV) - 1649.664x927.936mm, Pixel Pitch (HxV)- 0.4296x0.4296mm, Resolution- 3840x2160, Refreshing Frequency- 60Hz, Display Color- 1.07B, Bit Rate- 10 Bit, NTSC Gamut- 68%, Contrast Ratio- 1200:1, Viewing Angle- 178'(H/V), Brightness with glass (Min)- 400 cd/m2, Brightness with glass (Typ)- 450 cd/m2, Life Time 50,000 Hours, Operating System- System Version- Android 11.0, RAM- 4GB, ROM- 32GB, CPU- A55x4, GPU- Mail G52MP2, Touch System -Sensing Type-Infrared Recognition, Touch Recognition- Finger,Passive stylus, Accuracy- ±1.5mm, Touch Point- 40, Minimum object Size- 3mm, Writing Height- 3mm, Supporting OS- Windows/Android/Linux/Mac OS X/Chrome, Audio Output- 2.0, Output Power- 2x16w, Power Supply- 100-240V, 50/60Hz, Standby Power- ≤0.5W, Power Consumption (Typ/Max)- 200/360W., I/O Interface - HDMI In- 3, HDMI Out- 1, USB 2.0- 1, USB Type-C- 1, USB 3.0- 4, Touch Out- 2, VGA In- 1, Audio/MIC In- 1, Audio Out- 1, SPDIF- 1, RS232- 1, RJ45 In- 1, RJ45 Out- 1, Physical Specifications -Dimension (L×H×D)- 1709x1020x88mm, Package Dimension (L×W×H)- 1863x225x1140mm, VESA- 800×400mm, Net Weight- 47.30Kg, Gross Weight- 60.55Kg, Accessories-Power Cord- 1, HDMI Cable- 1, USB Touch Cable (Type A-B)- 1, Remote Control- 1, Writing Pen- 2, Environmental Conditions- Operation Temperature- 0° C ~ 40° C, Operation Humidity- 10% ~ 90%RH, Storage Temperature- -20° C ~ 60° C, Storage Humidity- 10% ~ 90%RH, Altitude- Below 5000 Meter , Optional PC Module-PC Module- OPS62A, Wireless Module- SI07, Certification-BIS, EMC, CE, FCC, UKCA

86" Flat Interactive Panel and OPS Display Specification-Size-86 inch, Panel Type- ADS, Back Light Unit- DLED, Response Time- 8ms, Aspect Ratio- 16.09, Display Area (HxV) - 1895.04x1065.96mm, Pixel Pitch (HxV)- 0.4935x0.4935mm, Resolution- 3840x2160, Refreshing Frequency- 60Hz, Display Color- 1.07B, Bit Rate- 10 Bit, NTSC Gamut- 68%, Contrast Ratio- 1200:1, Viewing Angle- 178'(H/V), Brightness with glass (Min)- 400 cd/m2, Brightness with glass (Typ)- 450 cd/m2, Life Time 50,000 Hours, Operating System-System Version- Android 11.0, RAM- 4GB, ROM- 32GB, CPU- A55x4, GPU- Mail G52MP2, Touch System -Sensing Type-Infrared Recognition, Touch Recognition- Finger,Passive stylus, Accuracy- ±1.5mm, Touch Point- 40, Minimum object Size- 3mm, Writing Height- 3mm, Supporting OS- Windows/Android/Linux/Mac OS X/Chrome, Audio Output- 2.0, Output Power- 2x16w, Power Supply- 100-240V, 50/60Hz, Standby Power- ≤0.5W, Power Consumption (Typ/Max)- 350/520W. I/O Interface - HDMI In- 3, HDMI Out- 1, USB 2.0- 1, USB Type-C- 1, USB 3.0- 4, Touch Out- 2, VGA In- 1, Audio/MIC In- 1, Audio Out- 1, SPDIF- 1, RS232- 1, RJ45 In- 1, RJ45 Out- 1, Physical Specifications- Dimension (L×H×D)- 1957x1160x100mm, Package Dimension (L×W×H)- 2110x225x1283mm, VESA- 800×400mm, Net Weight- 58.55Kg, Gross Weight- 75.90Kg, Accessories-Power Cord- 1, HDMI Cable- 1, USB Touch Cable (Type A-B)- 1, Remote Control- 1, Writing Pen- 2, Environmental Conditions-Operation Temperature- 0° C ~ 40° C, Operation Humidity- 10% ~ 90%RH, Storage Temperature- -20° C ~ 60° C, Storage Humidity- 10% ~ 90%RH, Altitude- Below 5000 Meter , Optional PC Module-PC Module- OPS62A, Wireless Module- SI07, Certification-BIS, EMC, CE, FCC, UKCA

98" Flat Interactive Panel and OPS Display Specification-Size-98 inch, Panel Type- ADS, Back Light Unit- DLED, Response Time- 8ms, Aspect Ratio- 16.09, Display Area (HxV) - 0000.00x0000.00mm, Pixel Pitch (HxV)- 0.0000x0.0000mm, Resolution- 3840x2160, Refreshing Frequency- 60Hz, Display Color- 1.07B, Bit Rate- 10 Bit, NTSC Gamut- 68%, Contrast Ratio- 1200:1, Viewing Angle- 178'(H/V), Brightness with glass (Min)- 400 cd/m2, Brightness with glass (Typ)- 450 cd/m2, Life Time 50,000 Hours, Operating System-System Version- Android 11.0, RAM- 4GB, ROM- 32GB, CPU- A55x4, GPU- Mail G52MP2, Touch System-Sensing Type-Infrared Recognition, Touch Recognition- Finger,Passive stylus, Accuracy- ±1.5mm, Touch Point- 40, Minimum object Size- 3mm, Writing Height- 3mm, Supporting OS- Windows/Android/Linux/Mac OS X/Chrome, Audio Output- 2.0, Output Power- 2x16w,Power Supply- 100-240V, 50/60Hz, Standby Power- ≤0.5W, Power Consumption (Typ/Max)- 350/520W., I/O Interface- HDMI In- 3, HDMI Out- 1, USB 2.0- 1, USB Type-C- 1, USB 3.0- 4, Touch Out- 2, VGA In- 1, Audio/MIC In- 1, Audio Out- 1, SPDIF- 1, RS232- 1, RJ45 In- 1, RJ45 Out- 1, Physical Specifications- Dimension (L×H×D)- 0000x0000x000mm, Package Dimension (L×W×H)- 0000x000x0000mm, VESA- 800×400mm, Net Weight- 58.55Kg, Gross Weight- 75.90Kg, Accessories-Power Cord- 1, HDMI Cable- 1, USB Touch Cable (Type A-B)- 1, Remote Control- 1, Writing Pen- 2, Environmental Conditions- Operation Temperature- 0° C ~ 40° C, Operation Humidity- 10% ~ 90%RH, Storage Temperature- -20° C ~ 60° C, Storage Humidity- 10% ~ 90%RH, Altitude- Below 5000 Meter , Optional PC Module- PC Module- OPS62A, Wireless Module- SI07, Certification-BIS, EMC, CE, FCC, UKCA

SITC of Air-Conditioning system Supply, Installation, Testing & Commissioning of Variable Refrigerant Flow modular type air-conditioning system. The system shall be complete with indoor and out door units with individual controller as per detail given in specifications and having following items : (Imported Items)Providing and supplying of indoor and out door units with Accessories:-Ceiling mounted Four way Flow Compact Cassette type units, 1). Providing and supplying 4.0 Ton Cassette A,C, unit 3 STAR INVERTER unit including of necessary fittinga and fixtures including making all connections, finishing, cleaning etc complete.

Providing and supplying 3.0 Ton Cassette A,C, unit 3 STAR INVERTER unit including of necessary fittinga and fixtures including making all connections, finishing, cleaning etc complete.

Providing and supplying 2.5 Ton Cassette A,C, unit 3 STAR INVERTER unit including of necessary fittinga and fixtures including making all connections, finishing, cleaning etc complete.

Providing and supplying 1.5 Ton Cassette A,C, unit 3 STAR INVERTER unit including of necessary fittinga and fixtures including making all connections, finishing, cleaning etc complete.

Wall Mounted Hi-wall (Split) type units Providing and supplying 1.8 Ton Split A.C Daikin Make Inverter 3 Star FTKL60 unit including of necessary fittinga and fixtures including making all connections, finishing, cleaning etc complete.

Providing and supplying 1.5 Ton Split A.C Daikin Make Inverter 3 Star FTKL50 unit including of necessary fittinga and fixtures including making all connections, finishing, cleaning etc complete.

Providing and supplying 1.0 Ton Split A.C Daikin Make Inverter 3 Star FTKL40 unit including of necessary fittinga and fixtures including making all connections, finishing, cleaning etc complete.

Installation, Testing & Commissioning indoor and out door units & Accessories:-Installation, Testing & Commissioning with indoor and out door units & Accessories:- Installation charges for Cassette AC

Installation, Testing & Commissioning with indoor and out door units & Accessories:- Installation charges for Split AC

Core cutting Charges RO Providing and making Holes (Core cutting ) in RCC chajjas , slab, pardi, beam of dia. 100 mm for passing the pipe line. Spec. No: - As directed by Engineer in charge

Supply, Installation, Testing & Commissioning of the following components for Low side work:M.S. stand for Indoor unit Cassette- Duly epoxy coated/galvanised of M.S. Structure for installing Indoor Cassette units along with vibration isolation pad . MS stand shall be chouky or wall mounted type as per site requirements.

M.S. stand for Outdoor unit Cassette - Duly epoxy coated/galvanised of M.S. Structure for installing Outdoor Cassette units along with vibration isolation pad . MS stand shall be chouky or wall mounted type as per site requirements.

M.S. stand for Outdoor Split unit - Duly epoxy coated/galvanised of M.S. Structure for installing Outdoor Split units along with vibration isolation pad . MS stand shall be chouky or wall mounted type as per site requirements.

M.S. stand for Outdoor Split unit big - Duly epoxy coated/galvanised of M.S. Structure for installing Outdoor Split units along with vibration isolation pad . MS stand shall be chouky or wall mounted type as per site requirements.

Copper piping with Insulation for Cassette AC Unit - All Refrigerant copper piping for Cassette / VRV / VRF system having 18G Thickness or Recommended Thickness by VRV/VRF Manufacturer along with insulation and all accessories like, T, Bend, Elbows complete. piping shall be pressure tested for 400 PSI, between indoor & outdoor units with 19mm/13mm Nitrile rubber insulation. All piping inside the room shall be properly supported on perforated trays with hanger and exposed piping shall be properly covered with UV treated cloth / Aluminium faced & should be in a closed tray with properly supported. Note :- However contractor to check Pipe dia & length as per Cassette / VRV/VRF Manufacturer Standard. Approved Make of Copper Piping:- Mandev / Totaline / Rajco Approved Make of Insulation :- Armacell / A-Flex / K-Flex

Copper piping with Insulation for Split AC Unit - All Refrigerant copper piping for Split / VRV / VRF system having 18G Thickness or Recommended Thickness by VRV/VRF Manufacturer along with insulation and all accessories like, T, Bend, Elbows complete. piping shall be pressure tested for 400 PSI, between indoor & outdoor units with 19mm/13mm Nitrile rubber insulation. All piping inside the room shall be properly supported on perforated trays with hanger and exposed piping shall be properly covered with UV treated cloth / Aluminium faced & should be in a closed tray with properly supported. Note :- However contractor to check Pipe dia & length as per Split / VRV/VRF Manufacturer Standard. Approved Make of Copper Piping:- Mandev / Totaline / Rajco Approved Make of Insulation :- Armacell / A-Flex / K-Flex

Electrical Cable.- Providing & fixing control cum transmission wiring of 2 core x 1.5 sqmm copper in suitable PVC conduits between indoors and out door unit.

Drain Pipe with Nirtile rubber pipe - Supplying, laying, fixing, testing of Rigid PVC Pipes of 6 kg/sqcm, duly insulated with 6 mm Thick Nirtile rubber pipe section, complete with all necessary fittings such as elbows, tees, reducers, serviceable 'P' traps. etc and supports such as clamps etc complete as per specifications