Pune University Tender

Providing and applying gypsum plaster ( with Gypsum material of Gypsum India / Mega Sign or equivalent make ) with finishing with gypsum material in 10 to 13 millimeter thickness to previously plastered surface / or on newly brick surface ( Excluding rough cast plaster ) in all position including preparing and Finishing the surface scaffolding etc.complete.

Providing and fixing in position Gypsum board false ceiling with 12.5 mm thick Gypsum boards, screwed/fixed to the under structure of suspended G.I. Grid constructed and suspended from the main ceiling consisting of ceiling sections of size 25 x 50 mm maximum center to center distance of 600 milimetre perimeter channel and intermediate channels at maximum center to center distance 1200 milimetre galvanized grid should be fixed to reinforced cement concrete slab. The gypsum board should be fixed to galvanized iron grid with necessary screws. The boards should be taped and filled from underside to give smooth,seamless ceiling. The rate should include necessary additional ceiling sections andintermediate channels. Additional intermediate channels should be fixed to strap hangers for additional support to prevent strapping at every 1200 milimetre item to be completed in all respect including necessary sleeves for ducts finishing of joints cut outs, painting including labour, material, lifts etc. all complete.

Providing and Fixing Mineral Fibre Acoustical Suspended Ceiling System with Dune (Bevelled Tegular) Edge Tiles of size 15mm Exposed Grid. The tiles should have Humidity Resistance (RH) of 99%,NRC 0.5, Light Reflectance 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module size of 600 x 600 x 16mm , with Recycled content of 35 %. The tile shall be laid on precoated G.I.channel height 32 with 15 mm wide T - section flanges colour white having rotary stitching and XL2 CLIP on all T sections i.e. the Main Runner, 1200 mm and 600 mm Cross Tees with a web height of 32mm and a load carrying capacity of 7.57 Kilograms/M2 and pull out stength of minimum 100 Kilograms.. The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system. The Tile and Grid system used together should carry a 10 year warranty.approved as per GRIHA and BS 476 etc. complete..( Make-Armstrong)

Providing and applying pearl/ luster finish paint of approved colour and shade to the existing plaster surface including scaffolding, preparing the surface, applying the acrylic wall putti etc. complete. (Paint make- Asian) Spec.No : As Directed by Engineer in Charge

Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil,grease, dirt and other foreign matter and sand papering as required etc. complete. (Paint make- Asian) Spec.No : As Directed by Engineer in Charge

Providing and applying plastic emulsion paint of approved quality, colour and shade to new surface in three coats including scaffolding, preparing the surface. (excluding primer coat) etc. complete.

Providing and fixing plywood panelling, with 12mm thick commercial ply of approved make fixed in line and level, finished in approved laminate with edges finished in aluminium corner gaurd profile of Kubic or equivalent make Cost of Laminate Rs. 500/Sqm. Spec.No : As Directed by Engineer in Charge

Providing and fixing pelmets of size 150 x 200mm, with verticals made of 19mm exterior grade MDF and horizontal in MDF along walls and partitions with necessary supports, 6mm groove should be provided between the MDF and the gypsum joints, as per detail complete. The rate to be inclusive of all accessories, such as anchor fasteners etc. complete. Spec.No : As Directed by Engineer in Charge

Dismalting work of existing partition/doors etc

Cabin Table : - (2100mm x 900mm x 750 mm) Providing and fixing Cabin table made out of 25mm thk. Commercial plywood Full round postform Table top finished with 0.6mm thk.flex laminate with 10mm thk. clear glass with 4 side edge polish and Top should have 63mm dia cable manager. Gable end & Modesty made of 18mm thick commercial plywood to be providing in dwg.Finishes - All the external surfaces to be finished with 1.0mm thk. commercial Laminate and internal surfaces to be finished with 0.8mm thk. commercial laminate of approved shade.Hardware- All necessary hardware for knockdown fitting like Minifix , wooden dowels,Table connector, L' Clip, Leveling Bolt with inserts, cable manager etc. complete as per Architect's Drawing and instructions of The Engineer In Charge. Edgeband - 2mm thick edgeband on all visible edges, 0.8mm edgeband on all non visible edges, PVC edge banding are imported from Rehau or Dolken of Germany. Manufacturer of Plywood - Merino/GreenPly/Anchor . Laminate - Merino/Greenlam/Century - I.S. 303/I.S.710-1980. Hardware - Hettich/Hafele/ebco . Edgeband - Rehau/Dolken .,as per Architectrual drawings to be approved by employer before entire scheme is finalized and directed by engineer incharge.

Side Storage with 3 drawer (1200mm x 450mm x 725mm) Providing and fixing Side Storage 450mm deep made out of 18mm thk. Commercial plywood for Top, sides,Shutter,Skirting etc. 3 Drawers Pedestal unit the drawer unit consists of 1 box drawer and 2 file drawer. Metabox is used as sides of drawers. 12mm thk. drawer bottom and 18mm thk. drawer back.The drawer unit is provided with central locking system, where in the three drawer are locked with one key. Storage back will be 9mm thk. ply as per drawings.Finishes - All the external surfaces to be finished with 1.0mm thk. Laminate and internal surfaces to be finished with 0.8mm thk. laminate of approved shade. Hardware - All necessary hardware for knockdown fitting like Minifix , wooden dowels,Shelf connector, L' Clip, Leveling Bolt with inserts etc. complete as per Architect's Drawing and instructions of The Engineer In Charge. Edgeband - 2mm thick edgeband on all visible edges, 0.8mm edgeband on all non visible edges, PVC edge banding are imported from Rehau or Dolken of Germany. Manufacturer of Plywood - Merino/GreenPly/Anchor. Laminate - Merino/Greenlam/Century- I.S. 303/I.S.710-1980. Hardware - Hettich/Hafele/ebco . Edgeband - Rehau/Dolken ,as per Architectrual drawings to be approved by employer before entire scheme is finalized and directed by engineer incharge.

Back Storage Unit -( 2100mm x 400 mm x725mm) Providing and fixing Back Storage 400mm deep made out of 18mm thk. Commercial plywood for Top, sides,Shutter,Skirting etc. Storage back will be 9mm thk. ply as per drawings.Finishes - All the external surfaces to be finished with 1.0mm thk. Laminate and internal surfaces to be finished with 0.8mm thk. laminate of approved shade. Hardware - All necessary hardware for knockdown fitting like Minifix , wooden dowels,Shelf connector, L' Clip, Leveling Bolt with inserts etc. complete as per Architect's Drawing and instructions of The Engineer In Charge. Edgeband - 2mm thick edgeband on all visible edges, 0.8mm edgeband on all non visible edges, PVC edge banding are imported from Rehau or Dolken of Germany. Manufacturer of Plywood - Merino/GreenPly/Anchor. Laminate - Merino/Greenlam/Century- I.S. 303/I.S.710-1980. Hardware - Hettich/Hafele/ebco . Edgeband - Rehau/Dolken ,as per Architectrual drawings to be approved by employer before entire scheme is finalized and directed by engineer incharge.

Cubical Table - (1500 mm x 750mm x750mm) Providing and fixing Cubical table with 3 drawer Fixed Pedestal made out of 25mm thk. Commercial plywood Full round postform Table top finished with 0.6mm thk.flex laminate and Top should have 63mm dia cable manager. Gable end & Modesty made of 18mm thick commercial plywood to be providing in dwg.Finishes - All the external surfaces to be finished with 1.0mm thk. commercial Laminate and internal surfaces to be finished with 0.8mm thk. commercial laminate of approved shade.Hardware- All necessary hardware for knockdown fitting like Minifix , wooden dowels,Table connector, L' Clip, Leveling Bolt with inserts, cable manager etc. complete as per Architect's Drawing and instructions of The Engineer In Charge. Edgeband - 2mm thick edgeband on all visible edges, 0.8mm edgeband on all non visible edges, PVC edge banding are imported from Rehau or Dolken of Germany. Manufacturer of Plywood - Merino/GreenPly/Anchor . Laminate - Merino/Greenlam/Century - I.S. 303/I.S.710-1980. Hardware - Hettich/Hafele/ebco . Edgeband - Rehau/Dolken .,as per Architectrual drawings to be approved by employer before entire scheme is finalized and directed by engineer incharge.

Side Storage with 3 Drawer unit - (900mm x 450mm x 725mm) Providing and fixing Side Storage 450mm deep made out of 18mm thk. Commercial plywood for Top, sides,Shutter,Skirting etc. 3 Drawers Pedestal unit the drawer unit consists of 1 box drawer and 2 file drawer. Metabox is used as sides of drawers. 12mm thk. drawer bottom and 18mm thk. drawer back.The drawer unit is provided with central locking system, where in the three drawer are locked with one key. Storage back will be 9mm thk. ply as per drawings.Finishes - All the external surfaces to be finished with 1.0mm thk. Laminate and internal surfaces to be finished with 0.8mm thk. laminate of approved shade. Hardware - All necessary hardware for knockdown fitting like Minifix , wooden dowels,Shelf connector, L' Clip, Leveling Bolt with inserts etc. complete as per Architect's Drawing and instructions of The Engineer In Charge. Edgeband - 2mm thick edgeband on all visible edges, 0.8mm edgeband on all non visible edges, PVC edge banding are imported from Rehau or Dolken of Germany. Manufacturer of Plywood - Merino/GreenPly/Anchor. Laminate - Merino/Greenlam/Century- I.S. 303/I.S.710-1980. Hardware - Hettich/Hafele/ebco . Edgeband - Rehau/Dolken ,as per Architectrual drawings to be approved by employer before entire scheme is finalized and directed by engineer incharge.

Modular partition - (2250mm x 60mm x 1200mm) Providing and fixing Modular partition made out of 60mm for stability and with the inside gap between two tile is approximately 40 mm for higher wire carrying capacity. Frame Horizontals are made of 09 mm thick Commercial Plywood Horizontals sections are made of 1.5 mm thick Aluminium Extrusion All the frames will be duly powder coated based on the choice of the Powder Coat colour , as per Customers choice, which will be inline with the Top trims & end trims. All the Caps viz end, inline & universal & raceway caps are made out of Die-cast Aluminum. These caps also are finished in an epoxy powder coating finish in the same color Raceway :-The raceways are made out of 1.5 mm Aluminium & powder coated. The electrical raceway (below or above TT), are fixed type which will be mounted on the verticals. The skirting/data raceway is hollow and will be mounted on the raceway channels. Wire Management:-The partition has two integrated raceway (for ele. & data separate, at skirting & at worksurface level). The free space available within raceway accommodates power, data and communication cables. The cable enters from the bottom (from floor) and can be taken from one end to the other end continuously as per Power / LAN layout plan. Approximately 50-60 (5mm Dia) cables can be accommodated in the raceway channels. raceways are with Aluminium cover both sides. The raceway covers will be provided with appropriate electrical switch cutouts, as required. Tiles: Fabric Tile: Constructed out of 9 mm thick Ply and covered with Fabric of choice. Whiteboard marker tiles: Made out of 9 mm thick Ply with 1mm glossy highly wear resistant face laminate with a balancing laminate on the back.

Sharing Modular Workstation with 3 Drawer Fixed Pedestal -( 1500 mm x 750mm x 750mm) Providing and fixing Workstation table with 3 drawer Fixed Pedestal made out of 25mm thk. Commercial plywood Full round postform Table top finished with 0.6mm thk.flex laminate and Top should have 63mm dia cable manager. Gable end & Modesty made of 18mm thick plywood to be providing in dwg. Fixed Pedestal - Size - 400 x 450 x 725mm ht- Pedestal unit the drawer unit consists of 1 box drawer and 2 file drawer. Metabox is used as sides of drawers. 12mm thk. drawer bottom and 18mm thk. drawer back.The drawer unit is provided with central locking system, where in the three drawer are locked with one key. Finishes - All the external surfaces to be finished with 1.0mm thk. Laminate and internal surfaces to be finished with 0.8mm thk. laminate of approved shade.Hardware- All necessary hardware for knockdown fitting like Minifix , wooden dowels,Table connector, L' Clip, Leveling Bolt with inserts, cable manager etc. complete as per Architect's Drawing and instructions of The Engineer In Charge. Edgeband - 2mm thick edgeband on all visible edges, 0.8mm edgeband on all non visible edges, PVC edge banding are imported from Rehau or Dolken of Germany. Manufacturer of Plywood - Merino/GreenPly/Anchor. Laminate - Merino/Greenlam/Century - I.S. 303/I.S.710-1980. Hardware - Hettich/Hafele/ebco . Edgeband - Rehau/Dolken as per Architectrual drawings to be approved by employer before entire scheme is finalized and directed by engineer incharge.

Medium Height Storage Unit - (2100 mm x 450 mm x 1200mm) Providing and fixing Back Storage 400mm deep made out of 18mm thk. Commercial plywood for Top, sides,Shutter,Skirting etc. Storage back will be 9mm thk. ply as per drawings.Finishes - All the external surfaces to be finished with 1.0mm thk. Laminate and internal surfaces to be finished with 0.8mm thk. laminate of approved shade. Hardware - All necessary hardware for knockdown fitting like Minifix , wooden dowels,Shelf connector, L' Clip, Leveling Bolt with inserts etc. complete as per Architect's Drawing and instructions of The Engineer In Charge. Edgeband - 2mm thick edgeband on all visible edges, 0.8mm edgeband on all non visible edges, PVC edge banding are imported from Rehau or Dolken of Germany. Manufacturer of Plywood - Merino/GreenPly/Anchor. Laminate - Merino/Greenlam/Century- I.S. 303/I.S.710-1980. Hardware - Hettich/Hafele/ebco . Edgeband - Rehau/Dolken ,as per Architectrual drawings to be approved by employer before entire scheme is finalized and directed by engineer incharge.

Supplying & erecting mains with 2x1.5 sq.mm.and earth wire 1.5 sq.mm FRLS PVC copper wire, in rigid PVC conduit min.20mm dia as per specification No: WG-MA/PC, para no. 1.4.1

Supplying & erecting mains with 2x2.5 sq.mm.and earth wire 1.5 sq.mm FRLS PVC copper wire in rigid PVC conduit min.20mm dia. as per specification No: WG-MA/PC, para no. 1.4.1

Supplying, erecting & terminating PVC armoured cable 4 core 6 sq mm copper conductor continuous 5.48 sq mm (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating PVC armoured cable 4 core 10 sq mm copper conductor continuous 5.48 sq mm (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying & erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted SPMCB of 24 poles, on iron/ GI frame/wooden board.(horizontal busbar type) as per specification no. SWSWR/MCBDB

Supplying, erecting & marking SPMCB 6A to 32A, C-series (for motor/power) in provided distribution board as per specification No. SW-SWR/MCB

Supplying, erecting & marking FPMCB 6A to 32A in provided distribution board as per specification No. SW-SWR/MCB

Providing, erecting & commissioning RCCBonly of electro magnetic type with 30/100/300 mA sensitivity and having capacity of 40A. 4 pole complete as per specification No. SW-RCCB/RCCB (Required 32A)

Supplying, erecting & marking FPMCB 40A to 63A in provided distribution board as per specification No. SW-SWR/MCB

Supplying & erecting HMS P.V.C. conduit 25 mm. dia. With necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC.

Point wiring for light/fan/bell concealed type in min 20 mm ISI marked HMS PVC conduit with 1.5 sq.mm. (2+1E) FR grade copper wires, modular type switch, earthing and required accessories as per specification No: WG-PW/CW

Supplying and erecting ISI mark modular type switch 16 / 20A with indicator, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 3 module duly erected flush to wall with required chiselling and finishing with cement morter / POP as per required to match the background in an approved manner.

Supplying and erecting regular/ standard model ceiling fan of 1400mm. sweep complete erected in position as per specification no. FG-FN/CF

Supplying and erecting ISI mark modular type (two module) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete. Note: Add Rs 57/- for additional two module box with double mounting plate if required.

Supplying & fixing anchor type fastener fan hook, with 2 nos. of 10 mm dia x 75 mm long with necessary materials for ceiling fan

Supplying and erecting ‘B’ grade G.I.pipe/M.S. pipe down rod duly painted for fan complete erected with PVC two core flexible cable 24/0.2 mm copper PVC wire.

Supplying and erecting fresh air cum Exhaust fan of light duty 250 V A.C. 50 cycles 300mm. 1400 RPM rust proof body & blades, wire mesh, duly erected in an approved manner and marking Sr. No. and date of erection.

Providing & erecting Perforated type Cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 300 mm width & 75 mm height complete with necessary coupler plates & hardware in approved manner.

Providing & erecting Perforated type Cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 150 mm width & 75 mm height complete with necessary coupler plates & hardware in approved manner.

Supplying and erecting modular type telephone socket one gang with safety shutter ISI mark approved make duly erected on provided plate and box with wiring connections complete.

Supplying & erecting telephone cable 2 pair with 0.5 mm dia. laid in provided PVC casing / conduit asper specification No.WG-TW

Supplying, erecting & commissioning Junction box suitable for 100 pairs as per specification No. WG-TW

Supplying & erecting I.S.I. mark Rigid P.V.C. conduit 25 mm. dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC, para no. 1.2.1

Supplying and erecting modular type computer Jack RJ 45 with safety shutter ISI mark approved make duly erected on provided plate and box with wiring connections complete.

Supplying & installing UTP networking Cat-6 cable suitable for LAN /WAN Computer net-working as per specification No. WG-COC/NC( Without Pipe Rate )

Supplying and erecting square / round shaped CRCA /diecast aluminium powder coated housing LED panel (slim edge-lit) light suitable for 13W to18W with provision for plane front frame with translucent cover fixed to the housing complete.

Supplying and erecting ISI mark modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type 3 pin 6A multi sockets with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 12 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Supplying and fixing 3 meter length, UTP patch cord of Cat 6 type in position as per specification No. WG-COC/PC

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 2 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Providing and Fixing Cat 6 UTP Jack with Strain relief and bend limiting boot Blue- Data

Supplying and fixing 24 port patch panel with tool-less keystone jacks in provided U Rack complete as per specification no. WG-NAS/PP

Supplying, fixing, and configuring ethernet managed ethernet switch of 24 ports with 2 SFP + 2 combo port and web view/CLI on provided rack or as directed as per specification no. WG-NWC/GBS

Supplying and fixing 1 meter length, UTP patch cord of Cat 6 type in position as per specification No. WG-COC/PC

50 Pair MDF Box With Krone Module

10 Pair MDF Box With Krone Module

Supplying and fixing 15U wall mount rack (DimensionDxWxH – 450x550x767 mm) as per specification No. WGNAS/RAK