Pune University Tender

Ceiling -Clip-in Providing & Fixing in position, Acoustical Ceiling made from 600 x 600 or 600 x 1200mm clip-in G.I perforated 0.56 mm thick,1.6 mm dia hole at 7mm pitch and 15% open area with edge border powder coated panels. suspension profile - Suspended from roof by on approved GI Carrier 600 c to c with 4 mm dia galvanised iron suspension rod & clip. in front of 48Kg /CuM glass wool 50 mm thick (Twiga make), including cost of finishing-items & Scaffolding, as per Architectural & Acoustical Design & Instructions & Complete in all aspects. and complete in all aspects. Spec. No.:- As directed by Engineer in charge.

Providing & fixing of structural glazing system with approved powder coating 60 to 80 mic, Jindal make aluminium profiles , mullion of size 130 x 70mm & transom of size 130 x 70mm fixed on slab / beam with ms HDG bracket, anchor fastner Hilti make, SS nut bolt , standard stainless screws , required aluminium cleats , angle , sleeve, toggle and using 24mm thick DGU , 6mm thick ST 120 HS from out side + 12mm air gap + 6mm clear toughen glass from inside glazed on secondary frame with double side spacer tape, structural silicone DC make & glass to glass joint filled with weather silicone etc. complete including Outer & Inner Toughen or Clear glass & Specific Colour as approved by architect or engineer incharge

Providing & fixing of 12mm thick clear toughen glass door system with ss fitting , top patch, bottom patch, door lock, floor spring & door handle of size 300mm x 25mm etc. complete. As per drawing and Toughen or Clear glass & Specific Colour as approved by architect or engineer incharge

Providing and Fixing of Mineral Fibre Acoustical Suspended Ceiling System with ultima (Bevelled Tegular) Edge Tiles of size 15mm Exposed GRID. The tiles should have Humidity Resistance (RH) of 99%, NRC 0.7, Light Reflectance 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module size of 600 x 600 x 20mm , suitable for Green Building application, with Recycled content of 32%. The tile shall be laid on precoated G.I.channel on XL2 Clip having a web height of 32 mm with 15 mm wide T - section flanges colour white having rotary stitching on all T sections i.e. the Main Runner, 1200 mm and 600 mm Cross Tees with a web height of 32 mm and a load carrying capacity of 7.7 Kgs/M2 and minimum pull out strength of 100 Kgs.. The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system. The Tile and Grid system used together should carry a 10 year warranty. products approved as per GRIHA and BS 476 etc. complete. Spec. No.:- As directed by Engineer in charge. SSR No.38.45, Page No. 257