Pune University Tender

Excavation for foundation in Hard rock by chiselling, wedging, line drilling, etc. including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the building area stacking as directed, dewatering and back filling with available earth/ murum watering, ramming etc. complete. (Lift upto 1.5 m). By Mechanical Means

Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete

Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC without SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC without SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C.coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including steel centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC without SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering, formwork ,cover blocks, laying/pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC without SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC without SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.

Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete

Providing second class Burnt Brick masonry with conventional/I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/in plinth external walls including bailing out water, striking joints on unexposed faces, racking out joints on exposed faces and watering, Complete. Spec. No: - Bd. G.1 Page No.313

Providing second class Burnt Brick masonary with conventional/ I.S. type bricks in cement mortor 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding complete. Spec. No: - Bd. G.5 Page No.315

Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc.complete.

Providing sand faced plaster externally in cement mortar using approved screened sand in. all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 Kg. per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment of 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days, scaffolding etc. complete. Bd.L.7 Page No. 369

Providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface ,applying primer coat ,scaffolding if necessary, and watering the surface for two days etc complete

Material Shifting by truck Spec. No: - As directed by Engineer in charge

Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete

Providing structural steel work in hollow section of various thickness and sizes in square,rectanular and round shape from 25mm to 450 mm section as per IS4923YST310 Grade produced from iron ore and blast furnace route etc.as per detailed designs and drawing or as directed including cutting,fabricating,hoisting, erecting, fixing in position, making riveted/bolted/ welded connections and paintingcomplete.

Filling in plinth and floors with approved excavated material in 15cm. to 20cm. layers including watering and compacting etc. complete.

Providing and laying insitu cement concrete M-30 with tremix treatment for 200 mm thickness for Concrete Road is including laying plastic sheet for 125 micron thickness with groove cutting of 4 mm wide and 20mm deep with necessary refilling with bitumen(excluding reinforcement)with coarse and fine aggregate(natural sand/ VSI grade finely washed crushed sand) etc. complete

Supply & Erection of Pre Engineered steel building (PEB) of size 24 mtr X 12.5 mtr X 6 mtr clear height at knee with SS make 304 grade turbo vantiletors of size 600mm dia and sky light of 1mtr X 3 mtr in polycorbonate/ transperent fibre sheet in alternate bay with box shaped,colour coated,0.5 mm thk galvalume steel gutter of 4inch width and down spout of rectagular shaped,machine pressed and riveted of .5 mm galvanised steel have 45 degree elbow at bottom at every column location.Diagonal rod bracing for roof and side walls considered with primary and secondary members as per specification and drawing with red oxide primer one coat and two coats of synthetic enemel paints. for connections Anchor bolts, High strength bolts for primary connections, machine bolts for secondary connections, self drilling self tapping screws for sheeting, fasteners,sealer,closures,ridge caps,flashing and trim. Roof with slope 1:10 covered 0.5 mm thk.pre coated sheets. and on 4 side of walls below the roof to above 3.0 m height from finished floor level covered with 0.5 mm thk precoated sheets as per technical specification, designing drawing and standered conditons .1)rigid frame Main Column web depth 300mm-450 mm x 5mm thk. x flange175mm x 6mm thk made of build up MS plate 2) Rafter Tappered plates of varying depth 300mm - 450 mm x 5mm thk plate x flange150mm x 6mm thk made up of MS plate 3) Purlins Z section of 200mm x 1.5 - 1.8mm thk cold form section 4) Girts Z section 200mm x 1.5mm -1.8mm thk cold form section 5) Gable end column 250mm x 5mm thk x flange 150 mm x 6mm thk. (make- jindal,essar, tata).please see all drawings.Note-The section given in item is minimun. However the bidder shall design for the PEB shed as shown in drawing. The design shall confirm to respective IS Codes. The bidder has provide Stability Certificate duly signed by Registered structural Engineer. If bidder failing to submit stability certificate the bill for structural steel work will not paid by university.Rate includes testing of sheets, structural members. If the size of PEB shed is less / more than size mentioned in description then the rate will be reduced / increased proportionally

Providing and fixing chicken mesh of 22 gauge, with about 30 cm. width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete /B.B.masonry and or tying by binding wire etc. complete.

Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9mm with lock plate of 3.15mm thickness reinforced with 35x35x5mm angle section fitted with sliding bolts and handles for both sides, deep M.S.channel section of depth and thickness not less than 65mm and 3.15mm respectively with hold fastar rangements ,M.S.Bracket plate 300x300x3.15mm minimum size and shape with square bar, suspension shaft of minimum 32mm diameter, hood cover of M.S. sheet not less than 0.9mm thickness and of any size attopand safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cas tiron or mild steel and one coat of red lead primer etc. complete.(I.S.62481979) (With mechanical gear)openable mechanical rolling shutter with gear box of size 3.6 m x 3.6 m or 6 m x 6 m.height with perforated sheet and MS sheet

BASIC TEST OF CEMENT:-. Standard Consistancy, Fineness, Specific Gravity, Setting Time ( Initial & Final ), Compressive Strength, Soundness.

BASIC TEST OF AGGREGATE.:-Water Absorption, Specific Gravity,Impact Value, Crushing Value.

CONCRETE:-Compressive Strength OF C.C. Cube(Set of 3 cubes)

BRICKS:-Water absorption (set of 5 bricks), Compressive strength (set of 5 bricks), Efflorescence (set of 5 bricks)

STEEL BAR TESTING :-Up to 16 mm (set of 3 bars)