Pune University Tender
Search from over 12139+ business opportunities that have been announced from the biggest Mahatenders, e tender Maharashtra, Maharashtra government tenders, and the Online Tender Notices posted on Maharashtra e tenders till date. Find opportunities that have come in from the multiple corporations, Maharashtra government departments, State PSUs, and Private companies from the state.
Pune University Tender
Petroleum Products
Eprocure
Opening Date30 Aug 2021
Closing Date13 Sep 2021
Tender Amount₹ 2,05,24,058
Costs
EMD
₹ 2,05,000Document Cost
₹ 5,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2021_UOFP_716376_1Tender No
2020-21/UoP/Estate/EEP/07Tender Authority
Pune University ViewPurchaser Address
-Website
http://www.unipune.ac.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Excavation for foundation in Hard rock by mechanical means, wedging, line drilling, etc. including trimming and levelling the bed, removing the excavated material up to a distance of 50 metres beyond the building are a stacking as directed,dewatering and back filling with available earth/ murum watering, ramming etc. complete. ( Lift upto 1.5 m).
25
-
737.45
Filling in plinth and floors with approved excavated material in 15cm.to 20cm.layers including watering and compacting etc. complete.
380
-
114.35
Filling in plinth and floors with contractors material / brought from outside and approved by Engineer in charge in layers of 15cm to 20cm including watering and compaction etc. complete.
10
-
1004.85
Providing soling using 80 mm size trap metal in 15cm.layer including filling voids with Crushed sand/grit, ramming, watering etc. complete.
20
-
1800.5
Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted/ bolted/ welded connections without connecting plates, braces etc.and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete.
0.25
-
79658.95
Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, With fine aggregate (Crushed sand VSI Grade)
30
-
6251.7
Providing and laying Cast in situ cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). With Aritifical sand Bd.F.6 Page No. 300 and B.7, Page No.38 i) With atrifical sand - Ground floor
3.5
-
12297
ii) With atrifical sand - First floor
2
-
12415.2
Providing and laying Cast in situ cement concrete M-25 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including centering, formwork, cover blocks, compaction, finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc.complete.(Excluding reinforcement and structural steel).With Aritifical sand Spec. No.: Bd.F.8 Page No. 302 and B.7, Page No.38 i) With atrifical sand - Ground floor
17.5
-
13707.9
Providing and laying Cast in situ cement concrete M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including centering,formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).. With Aritifical sand Spec. No.:Bd.F.9 Page No. 303 and B.7,Page No.38
2.3
-
13963.1
Providing and laying Cast in situ cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C.coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including centering, formwork, cover blocks,laying/pumping, compacting , curing , finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). With Aritifical sand Spec. No.: Bd. F. 12 Page No. 304 & B-7, Pg 38
2.5
-
7433.95
Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. Spec. No.: Bd.F.17, Page No. 306
( Make TATA, SAIL,JINDAL) - i) Ground floor
2.3
-
68307.75
ii) First floor
0.1
-
68990.8
Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually, striking joints on unexposed faces,raking out joints on exposed faces and watering etc. Complete.
87.8
-
7860.95
Providing second class burnt brick masonry with conventional / I.S. type brick in cement mortar 1:6 in superstructure including striking joints, racking out joints watering and scaffolding complete. For superstructure. Spec. No.: As director by engineer incharge and BDG- 5 page no-315
188.6
-
8154.4
Providing Second class burnt brick masonry with conventional / I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of two bars of 6 mm diameter / two hoop iron strips 25 mm x 1.60 mm at every third course, properly bent and bounded at ends scaffolding raking out joints and watering etc. complete. Spec. No.: Bd. G. 7 Page 316 i) With natural sand - First floor
5
-
1083.6
Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved waterproofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1 Kg per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm.making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test etc. complete.
10
-
1232.15
Providing waterproofing in W.C. and bath including brick bat coba in all position including providing and laying 12mm bedding in cement mortor 1:3 on vergin concrete slab with waterproofing compound @ 1kg/per bag of cement laying brick bat coba of required thickness in cm 1:5 with waterproofing compound 1 kg/bag of cement grouting and finishing the top layer with 20mm thick brick bedding in cm mortor 1:3 with waterproofing compound 1 kg/per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years' guarantee on requisite stamp paper including curing etc.complete. i) With Natural Sand
5
-
6064.55
Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. Spec. No.Bd. L.2 Page No. 368 i) With Natural Sand - Ground Floor
313.7
-
292.25
ii) With Natural sand - First floor
2309.4
-
295
Providing and applying gypsum plaster (with Gypsum material of Gypsum India/ Mega Sign or equivalent make) with finishing with gypsum material in 10 to 13 millimeter thickness to previously plastered surface/ or on newly brick surface (Excluding rough cast plaster) in all position including preparing and Finishing the surface scaffolding etc.complete.
100
-
630.45
Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15mm thick in C.M. 1:4 using waterproofing compound at 1 kg. per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8mm thick in C.M. 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc. complete Spec. No.Bd.L.7 Page No. 369. i) With Natural Sand - Ground Floor
165
-
662.05
ii) With Natural sand - First floor
685
-
668.3
Providing neeru finish to plastered surfaces in all positions including scaffolding and curing complete.Spec. No.Bd. L.10, Page No.370 i) Ground Floor
313.7
-
60.85
ii) First Floor
1376.7
-
61.45
Providing and laying machine cut machine Polished Kota stone Flooring/Skirting 25mm to 30mm thick and required width in plain/diamond pattern on bed of 1:6 C.M. including cement float,filling joints with neat cement slurry, curing, polishing and cleaning etc. complete. i) Ground Floor
136.6
-
1223.95
ii) First Floor
1.5
-
1236.1
Providing and laying machine cut machine polished machine cut Kota stone slabs 20 to 25mm thick for treads and risers of steps and staircases, with rounded nosing for the treads on a bed of 1:4 cement mortar including cement float,filling joints with neat cement slurry,curing,polishing and cleaning etc. complete. i) Ground Floor
342.4
-
1498.9
ii) First Floor
36.9
-
1513.8
Providing and laying Antiskid Ceramic tiles of approved quality of size 30 cm x 30 cm and confirming to IS15622-2006 (Group-BII A) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete. (Basic rate in Rs 463.00 Sq.m)
11.2
-
1139.8
Providing and laying ceramic tiles of Kajaria/ Nitco/ Asian make having sizes 30 cm x 45 cm for dado and skirting in required position with ready made adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing complete. (Basic rate in Rs. 489.00 Sq.m)
55.6
-
1237.7
Providing and laying vitrified Mirror/ Glossy Finish Tiles of Kajaria/Nitco/ Asian /Coral make having size 590mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15,622-2,006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete. Note:( Water absorption should not be more than 0.05%) (Basic rate in Rs 573.00 Sq.m) i) Ground Floor
50
-
1159.75
ii) First Floor
795
-
1171.25
Providing and laying vitrified mirror / glossy finish tiles of RAK/ Kajaria/ Nitco/ Asian or equivalent make having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete.
b) Skirting (Basic rate in Rs 573.00 Sq.m) i) Ground Floor
30
-
1233.5
ii) First Floor
74
-
1245.75
Providing and fixing heavy duty interlocking concrete Coloured paving blocks of 80mm thickness of having a strength of 300 Kilogram/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete
100
-
1158.7
Providing and laying in situ cement concrete M20 with tremix treatment for 100 mm thickness for flooring with groove cutting of 4mm wide and 20mm deep with necessary refilling with bitumen etc. complete.
50
-
806.2
Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding,preparing thesurfaces.(excluding the primer coat.) etc. complete. i) Ground Floor
3350
-
45.1
ii) First Floor
1578.2
-
45.55
Providing and applying two coats of exterior weathershield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning, preparing the plaster surface, applying primer coat, scaffolding if necessary, and watering the surface for two day set ccomplete.
1700
-
226.6
Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete. i) Ground Floor
3441.2
-
35.65
ii) First Floor
1578.2
-
36
Providing and applying two coats of flat oil paint of approved colour and shade to internal/external plastered surfaces in cluding scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete.
100
-
97.55
Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron hold fast of size 300mm x 40mm x 5mm with oil painting, etc. complete
0.5
-
100199.45
Providing and laying telephone black / Amba White / Cadbury brown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame / dado / window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing / full moulding from inside and outside to the frame and sharp the edges where ever necessary, curing, etc. complete.
43.5
-
4388.2
Providing and Fixing Fibro Plast door shutter 30mm thick with necessary SS fixtures and fittings like aldrop, handles, tadipatti etc.complete as approved by architect Spec.No. As directed by Engineer- in- charge.
10.8
-
3000
Providing and fixing solid core flush door 40 MM thick single/double leaf shutter of exterior grade as per detailed drawing approved laminate 2 mm thick on both faces Machine Hot Pressed or as directed, all necessary S.S fittings and fixtures with, H type handels 25 mm X 600mm - (4 Nos for Double amd 2 Nos for Single Shutter), Tower Bolt - 300 mm, Aldrop - 300 mm X 16 mm thik, Hinges 125 mm - (8 Nos for Double and 4 Nos for Single Shutter) and finishings etc. complete.Note-as per detailed architectural design and drawings. The materials to be used as mentioned in the list of approved make.Spec No : As directed by Engineer in charge.
100
-
4300
Providing and fixing solid core flush door 50 MM thick Double leaf shutter of exterior grade as per detailed drawing approved veneer 3 mm thick on both faces or as directed, all necessary S.S. fittings, and fixtures with H type handels 25 mm X 600mm - (4 Nos for Double Sutter), Tower Bolt - 300 mm, Aldrop - 300 mm X 16 mm thik, Hinges 125 mm - (8 Nos for Double Shutter) etc. complete.Note-as per detailed architectural design and drawings. The materials to be used as mentioned in the list of approved make.Spec No : As directed by Engineer in charge.
30
-
5400
Providing and fixing solid core flush door 50 MM thick Double leaf shutter of exterior grade as per detailed drawing approved laminate 2 mm mm thick on both faces Machine Hot Pressed or as directed, all S.S. necessary fittings, and fixtures with H type handels 25 mm X 600mm - (4 Nos for Double Sutter), Tower Bolt - 300 mm, Aldrop - 300 mm X 16 mm thik, Hinges 125 mm - (8 Nos for Double Shutter) etc. complete.Note-as per detailed architectural design and drawings. The materials to be used as mentioned in the list of approved make.Spec No : As directed by Engineer in charge.
150
-
4400
Providing and fixing in position anodised (as per I.S. 1868/1982) Aluminium sliding window of three tracks with rectangular pipe having overall dimension 95 x 38 x 0.90 mm at weight 0.637 kg/R.mt. and window frame bottom track section 92x 31.75x 1.30 mm at weight 1.07 Kg / Rmt. Top & side track section 92 x 31.75 x 1.30 mm at weight 0.933 Kg/R.mt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kg/Rmt. Interlocking Section 40x18x1.10mm at weight 0.469 Kg/Rmt. And handle section 40x18x1.25mm at weight 0.417 Kg/Rmt. as per detailed drawing and as directed by Engineer-In-Charge with all necessary aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5mm thick plain glass and aluminium mosquito net shutter with stainless steel jali with all required screws and nuts etc. complete. (Make - Jindal) (Glass -Modi, Saint-Gobain) with powder coating without box.
55.1
-
5153.35
Providing and fixing in position anodised (as per I.S. 1868/1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension 63.5 x 38.1 x 1.020 mm at weight 0.547 kg/R.mt. and window frame bottom track section 61.85x 31.75x 1.20 mm at weight 0.695 Kg / Rmt. Top & side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 Kg/R.mt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kg/Rmt. Interlocking Section 40x18x1.10mm at weight 0.469 Kg/Rmt. And handle section 40x18x1.25mm at weight 0.417 Kg/Rmt.and top section 40x18x1.25mm at weight 0.417 Kg/Rmt as per detailed drawing and as directed by Engineer-In-Charge with all necessary aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5mm thick plain glass with all required screws and nuts etc. complete. (Make - Jindal) (Glass -Modi, Saint-Gobain)
2
-
5002.7
Providing and fixing powder coated Aluminium Louverd window / ventilator of various size wih powder coated as per detailed drawing & specifications including aluminium frames 80x 38 mm x 1.22mm box type , 5mm thick sheet glass louvers, of approved quality etc.complete (Make - Jindal) (Glass -Modi, Saint-Gobain)
4.9
-
3010
Providing and fixing M.S.Grill work for windows ventilators etc. 15kg/sq.m. as per drawing including fixtures,necessary welding & painting with one coats of anticorrosive paint & two coats of oil painting etc. complete.
150
-
1359.5
Providing and Fixing 50mm diameter 1.5mm thick Stainless Steel Hand Railing in S.S. 304 grade including fabricating, fixtures, errecting, necessary welding, griding, finishing, buffing to Stainless Steel pipe etc. complete. Spec..No. As directed by Engineer- in- charge.
15
-
2051.85
Providing and Fixing mat finish stainless steel (of 302 grade) railing with top pipe of 50mm dia.and vertical pipe of 38mm dia at 0.60 mc/c or as required and horizontal pipes of 25mm dia in three rows,all pipes of 2mm thick including buffing,fabricating fixtures and fastening including pipe base of appropriate diameter and ball base of 75mm dia above newel post of 75mm diameteretc.complete Spec. NO. As directed by Engineer incharge.
80
-
3359.95
Providing and fixing 75 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. com-plete. Spec. No.: As directed by Engineer in charge.
(Make- Finolex, Supreme, Kisan, Prince)
10
-
523.45
Providing and fixing 100 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. com-plete. Spec. No.: As directed by Engineer in charge.
(Make- Finolex, Supreme, Kisan, Prince)
40
-
703.9
Providing & fixing on walls/ ceiling/ floors, 15 mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes weight of 1.48 Kg/metre with necessary fittings. remaking good the demolished portion and applying primer of anti-corrosive oil paint 2 coats complete. Spec. No.: Bd.V.5 Page No. 551
(Make - Tata, Zenith )
35
-
402.8
Providing and fixing on walls/ ceiling/ floors 20 mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes of 1.93 kg/meter with necessary fitting remaking good the demolished portion and applying primer of anti-corrosive oil paint , 2 coats complete. Spec. No.: Bd.V.5 Page No. 551
(Make - Tata, Zenith )
5
-
479.4
Providing & fixing on walls/ ceiling/ floors, 25 mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes weight of 3.01 Kg/meter with necessary fittings remaking good the demolished portion and applying primer of anti-corrosive oil paint 2 coats complete. Spec. No.: Bd.V.5 Page No. 551
(Make - Tata, Zenith )
5
-
568.55
Providing & fixing on walls/ ceiling/ floors, 32 mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes weight of 3.89 Kg/meter with necessary fittings . remaking good the demolished portion and applying primer of anti-corrosive oil paint 2 coats etc. complete. Spec. No.: Bd.V.5 Page No. 551
(Make - Tata, Zenith )
35
-
612.6
Providing & fixing on walls/ ceiling/ floors, 40 mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes weight of 4.49 Kg/meter with necessary fittings & remaking good the demolished portion and applying primer of anti-corrosive oil paint 2 coats etc. complete. Spec. No.: Bd.V.5 Page No. 551
(Make - Tata, Zenith )
100
-
680.8
Providing & fixing on walls/ ceiling/ floors, 50 mm dia heavy grade having embossed as ISI Mark galvanised iron pipes weight of 6.33 Kg/meter with necessary fittings.& remaking good the demolished portion and primer of anti corrossive oil paint 2 coats etc. complete.
(Make - Tata, Zenith )
10
-
879.05
Providing and fixing screw down for 25 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete Spec. No.: Bd.V.9 Page No. 555
4
-
773.1
Providing and fixing screw down 32 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete
Spec. No.: Bd.V.9 Page No. 555
2
-
879.05
Providing and fixing screw down 40 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete
2
-
1057.4
Providing and fixing screw down 50 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete
2
-
1798
Providing and fixing European type wall-hung white water closet of approved make with push valve concealed type with cover plate 32 mm size of approved make including soilpipe, vent pipe up to outside face of wall,100 mm dia.G.I.plug bend inlet pipe all fittings,cuttingand making good walls, floors etc. complete.
4
-
12998.15
Providing and fixing 10 cm PVC nahani trap with grating etc. complete. Spec. No.: BD.V 32 A page 551 and as directed by Engineer in charge
4
-
492
Providing and fixing C.P.Angular stop cock with wall flange of approved make continental including necessary sockets/union nut etc. complete. Spec. No.: As directed by Engineer in charge
4
-
2559.55
Providing and fixing C.P.Two way BIB cock of approved make continental including necessary sockets/union nut etc. complete. Spec No.: As Directed by Engineer Incharge
4
-
1304.95
Providing and fixing P.V.C.Rain water pipes of 110mm outer diameter and having wall thickness of 2.2 to 2.7mm confirming to I.S.13592-1992 including proper rainwater receiving recess with P.V.C.plug,bend,necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25 mm to 40mm from face of wall a fixing with clips of approved quality and number,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C.or masonry blocks, including necessary scaffolding and maintenance for 3yrs for any leakages or dislocations of pipes.All the P.V.C.fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete.. Spec No.as directed by Engineer in Charge.
(MAKE - KISAN, FINOLEX )
25
-
481.5
Providing and fixing White glazed with bottle trap earthen ware Wash Hand Basin of 55 x 40 cm size including cold water piller taps, brackets ,rubber plugs and brass chain, stop tap, chromium plate bottle trap and necessary pipe connections including UPAC waste pipe and trap upto the outside face of the wall, making good the damaged surface, testing etc. complete. Specifications: As directed by Engineer-In-Charge.
4
-
6899.25
Providing and fixing Hand shower (health faucet) with 8mm dia. 1m long flexible tube having wall hook with approved make including necessary sockets/union nut etc.complete as directed by Engineer in charge.
4
-
1984.7
Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of low density polythyler and built corrugation including of delivery upto destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity above 1000 to 20,000 litres Spec. No.: As directed by engineer-in-charge.
20000
-
11.55
Providing and laying concrete pipes of I.S.NP.class of 150mm diameter in properline, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete.
40
-
524.5
Providing and laying concrete pipes of I.S.NP. Class of 300 mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar1:1 and refilling the trench complete.
150
-
739.55
Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W.pipes, BrickMasonry,plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140Kilogram with frame etc complete.
14
-
8987.15
Providing and constructing Brick Masonry Inspection Chamber 90cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W.pipes, Brick Masonry,plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140Kilogram with frame etc complete.
14
-
10980.5
Providing and constructing Ductile Iron circular manhole 45cm dia. At top 90cm at bottom upto 1.80 meter to 2.70 meter depth including excavation,laying1:4:8 cement concrete bedding 15cm thick burnt brick mansonry with 1:1 cement mortar plaster 25mm thick inside and outside 20mm (1:3) ductile iron heavy type cover with ring 125 Kilogram in weight. High strength. More life and Durability, Good Antiskid Grip, Suitable to heavy the atric loading, Light weight cast in gafter cost benefits for Transportation Refilling etc.as per requirement with prior approval of concerned Superitending Engineer.
1
-
12000
Providing and fixing 15cm x 10cm salt glazed stoneware gully trap in cement concrete 1:4:8 outside the building including cast iron grating in the sink, connecting glazed stoneware pipe,brick masonry chamber with cast iron lid and cast iron grating for the gully trap.
5
-
1441.35
75mm Thick (half height/full height/Jumbo height) Birla Aerocon Panel partition (Hyderabad Industries Limited) Providing and fixing in position (half height/full height/Jumbo height) 75mm thick Birla Aerocon Panel partition (Hyderabad Industries Limited) sandwich panel made of two reinforced cement facing sheets on either sides of a light weight concrete core, fibre reinforced cement facing sheets are of 4mm thickness with recess edge to be fixed with tongue & groove joining system with panel size of (2400 x 600 , 2700 x 600, 3000 x 600) as per requirement (with tolerance L,W & T) + 1mm weight 59 kg/m2 . Item to include floor & ceiling channel to be fixed with self expansion screws of size 6 x 60mm at every 600 mm c/c on 75mm face of channel & sodium silicate & fly ash paste/ polyuretheme foam as per requirement.Fixing of Aerocon panels to Aluminium angle with self tapping screws at every 300mm c/c & fixing of beading for top end & free end.Necessary transportation & handling of material on third floor. Note:- 1) The partition to be installed strictly as per the guidelines & specficiations mentioned for installation procedure in technical manual of Aerocon Panels (C.K Birla Group & Hyderabad Industries Limited) 2) The special care is to be taken for jumbo height partition with staggered joint (min 1500 mm ) as mentioned in Aerocon panels company manual also for fixing half height/ full height partition also for T & L junction, lintel panels for doors, fixing of doors & windows, fixing of door frames & window frames 3) All the necessary grout, binding compound are to used of Birla Aerocon make only & mixing as per standard procedures & guidelines of company 4) The support & coordination for necessary additional M.S. Fabrication work which is required for installation as mentioned in Aerocon Panel manual will be paid in structural steel item. 5) The contractors will have to provide shop drawings & joining details before starting the work for approval. 6)The cost of cutting of necessary electrical conduits & filling gaps with cement mortar is included in the item etc complete. 7) The Contractor shall provide official approval from Aerocon panel company, regarding installation work of Aerocon panel partition executed as per guidelines mentioned in Company's manual.
325
-
1500
Dismantling the R.C.C. Work and sorting out the materials such as steel etc.as directed and stacking them within the specified lead as directed etc. complete.
10
-
1385.75
B) Electrical Work
Providing printed instruction chart for treating persons suffering from electric shock, printed in English & Marathi and duly laminated.
4
-
115
Supplying and erecting ABC powder type fire extinguisher asper IS : 13849 of 6 kg capacity with necessary clamp for erection on wall.
1
-
3359
Supplying and erecting ABC powder type 'Ceasefire' type fire extinguisher as per IS : 13849 of 1 kg capacity with necessary clamp for erection on wall
1
-
2107
PANELS AND DBS Supplying and erecting Intelligent flush mounted panel meter three phase four wire (IPM) input voltage measurement range 50-550 VAC (P-P) 415V,Aux supply 90- 300 VAC/DC, CT secondary site selectable 1A / 5A, Flush mounting 96 x 96 mm , CT/ PT site programmable, Flush mounted (96 x 96 mm) meter Constant Wh viewing in LCD Multifunction meters in auto scroll mode with Voltage, current, frequency, Power factor kW, kVA, kVAr, kWh, kVAh, kVArh, phase angle, interrupts, THD, Events (highlow) neutral current with LED Display (excluding CT'S) complete with RS 485 communication protocol, class 1 accuracy and wriring connections and mounting hardware on provided panels complete with calibration certificate from manufacture
2
-
6596
Supplying and erecting L.T. current transformer with wound / bar primary50/5 to 1000/5A ratio with 15 Vaburden class-I, erected in provided CRCA box duly secured with insulating material and connected to meter with test certificate. - FOR MAIN PANEL
6
-
834
Supplying and erecting Bus bar chamber triple pole with neutral with four aluminium bars, 500V 800A complete as per specification no. CP-BB - VERTICL AND HORIZONTAL BUSBAR
6
-
10179
Providing and fixing sheet metal work in CRCA sheet with fabrication of boxes panel boards etc. including cutting, bending, drilling, welding, rivetting etc. treated with anti-rust treament and duly power coated or painted with one coat of red lead paint and 2 coats of enamel paint as directed.
513
-
226
Supplying & erecting LED type indicating pilot lamp with LED colours red / yellow / green, 230 / 250V on provided box / panel with necessary material, wiring & connections etc.
14
-
172
Supplying and erecting air circuit breaker manually operated nondrawout type of 630A rated at 50º C without deration, 500V, 3 pole having short circuit rating 50 kA (Ics=Icu=Icw for 1s),with standard accessories and thermal magnetic release on provided iron frame as per specification no. SW-SWR/ACB
2
-
57927
Providing & erecting 4 Pole MCCB of 200 A, 415V capacity with short circuit rating 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, in provided enclosure on iron /GI frame as per specification no. SW-SWR/MCCB
1
-
10811
Providing & erecting 3 Pole MCCB of 200 A, 415V capacity with short circuit rating 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, in provided enclosure on iron /GI frame as per specification no. SW-SWR/MCCB
3
-
9009
Providing & erecting 3 Pole MCCB of 250 A, 415V capacity with short circuit rating 36 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, in provided enclosure on iron /GI frame as per specification no. SW-SWR/MCCB
2
-
12264
Providing & erecting 4 Pole MCCB of 250 A, 415V capacity with short circuit rating 36 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, in provided enclosure on iron /GI frame as per specification no. SW-SWR/MCCB
1
-
14717
Supplying and erecting extended rotary handle for MCCB with adjustable telescopic rod suitable for upto 250A MCCB complete.
7
-
1113
Supplying, erecting & marking TPMCB 6 A to 32A in provided distribution board as per specification no. SW-SWR/MCB
32
-
653
Supplying, erecting & marking FPMCB 6A to 32A in provided distribution board as per specification no. SW-SWR/MCB
2
-
905
Supplying, erecting & marking TPMCB 40A to 63A in provided distribution board as per specification no. SW-SWR/MCB
6
-
926
Supplying, erecting & marking FPMCB 40A to 63A in provided distribution board as per specification no. SW-SWR/MCB
3
-
1232
Supplying, erecting & marking SPMCB 6A to 32A, C-series (for motor/power) in provided distribution board as per specification no. SW-SWR/MCB
216
-
153
Supplying, erecting & marking DPMCB 6A to 32A, C- series (for motor/power) in provided distribution board as per specification no. SW-SWR/MCB
10
-
461
Providing, erecting and commissioning 4 pole RCCB only of electromagnetic type with 30/100/300 mA sensitivity and having capacity of 16/25A complete as per specification no. SWRCCB/ RCCB
4
-
2342
Providing, erecting and commissioning 4 pole RCCB only of electromagnetic type with 30/100/300 mA sensitivity and having capacity of 40A complete as per specification no. SW-RCCB/RCCB
2
-
2373
Supplying and erecting single pole and neutral distribution board (SPNDB) with door surface/flush mounted with 2 ways for incoming and 10 ways for outgoing SP MCB’s on iron/ GI frame as per specification no. SW-SWR/MCBDB
3
-
1270
Supplying and erecting single pole and neutral distribution board (SPNDB) with door surface/flush mounted with 2 ways for incoming and 6 ways for outgoing SP MCB’s on iron/ GI frame as per specification no. SW-SWR/MCBDB
3
-
1056
Supplying & erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted SPMCB of 12 ways, on iron /GI frame (horizontal busbar type) as per specification no. SW-SWR/MCBDB
8
-
2032
Supplying & erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted SPMCB of 24 ways, on iron/ GI frame/wooden board.(horizontal busbar type) as per specification no. SW-SWR/MCBDB
3
-
2919
Supplying & erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted suitable for 3 pole MCCB as incomer & outgoing SP MCB (12 poles) or TP MCB of 4 ways (12 poles) on iron/ GI frame. (vertical busbar type) as per specification no. SW-SWR/MCBDB1
1
-
5569
Supplying & erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted suitable for 3 pole MCCB as incomer & outgoing SP MCB (36 poles) or TP MCB of 4 ways (12 poles) on iron/ GI frame. (vertical busbar type) as per specification no. SW-SWR/MCBDB1
1
-
8691
Supplying & erecting CRCA sheet metal one way enclosures suitable for DP MCB /TP MCB /FP MCB erected on angle iron/GI frame complete.
6
-
339
CABLES AND MAINS Supplying, erecting & terminating XLPE armoured cable 3 core 2.5 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU
1
-
162
Supplying, erecting & terminating XLPE armoured cable 3 core 4 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU
182
-
205
Supplying, erecting & terminating XLPE armoured cable 4 core 4 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU
497
-
251
Supplying, erecting & terminating XLPE armoured cable 4 core 6 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU
140
-
336
Supplying, erecting & terminating XLPE armoured cable 4 core 10 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU
65
-
512
Supplying, erecting & terminating XLPE armoured cable 3½ core 35 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL
164
-
249
Supplying, erecting & terminating XLPE armoured cable 3½ core 70 sq. mm. aluminium conductor with continuous 8.35 sq. mm. (10 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL
70
-
420
Supplying, erecting & terminating XLPE armoured cable 3½ core 150 sq. mm. aluminium conductor with continuous 12.97 sq. mm. (8 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL
190
-
759
Supplying, erecting & terminating XLPE armoured cable 3½ core 185 sq. mm. aluminium conductor with continuous 12.97 sq. mm. (8 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL
63
-
929
Supplying, erecting & terminating XLPE armoured cable 3½ core 240 sq. mm. aluminium conductor with continuous 12.97 sq. mm. (8 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL
300
-
1164
Making trench of suitable width and depth in hard murum / tar road for laying provided LT cable of 16 sq. mm & above and covered with half round hume pipe complete as per specification no. CW-EXN-CTR
213
-
151
Supplying and laying (including excavation of suitable width & depth up to 90 cm) 160 mm outside dia, double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.
213
-
452
LUMINARIES AND FANS Supplying & erecting T8 LED 18W tube light fitting (4 feet)with Polycarbonate housing, heat sink, integrated HF electronic driver complete( including lamp).
93
-
570
Supplying and erecting LED square / circular 16 to 20W down lighter having pressure die-cast aluminium housing, opal translucent cover, mounting arrangement with board for surface type or spring loaded mounting clips for flush type complete.
129
-
1212
Supplying and erecting square shaped CRCA /die-cast aluminium powder coated housing LED panel light (slim edge-lit) 600x600mm suitable for 36 W-40W with provision for plane front frame with translucent cover fixed to the housing complete.
56
-
3552
Supplying LED concealed type foot / step light with PVC body for indoor/outdoor application suitable for upto 5W LED including driver and erecting by making necessary arrangement/recess in wall to make it flush with surface.
18
-
517
Supplying and erecting five star rated energy saving Ceiling fan 230 V A.C. 50 cycles 1200 mm complete erected in position as per specification no. FG-FN/CF
70
-
1937
Providing and erecting air circulator 600 mm. sweep oscillating
type, wall mounting 1440 RPM without speed regulator, overheat
protection unit, totally enclosed, flame proof motor suitable for
230/250 volts single phase, 50 cycles A.C. supply, core lead wire
and with moisture proof treatment to winding and with ‗E‘ class
insulation
4
-
5497
Supplying and erecting ISI mark modular type (two module) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete.
70
-
348
Supplying & fixing anchor type fastener fan hook, with 2 nos. of 10 mm dia x 75 mm long with necessary materials for ceiling fan.
70
-
92
Supplying and erecting Exhaust fan heavy duty 230 V A.C. 50 cycles 450 mm. 1400 RPM complete erected in position as per specifcation no. FG-FN/EXF
19
-
4312
POINT WIRING AND ACCESSORIES Point wiring in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FR grade copper wire, modular type switch, earthing and required accessories as per specification No: WG-PW/SW
222
-
433
Secondary point wiring for additional light/ bell point in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FR / FRLSH grade copper wire with required accessories as per specification No: WG-PW/SW
160
-
158
Point wiring for independent plug in PVC trunking (casingcapping) with 1.5 sq.mm (2+1E ) FR grade copper wire, modular type switch, earthing and required accessories as per specification No: WG-PW/SW
116
-
585
Wiring for plug on board with Switch socket, copper wiring and earthing as per specification No: WG-PW/SW
36
-
95
Supplying & erecting mains with 2x2.5 sq.mm. and earth wire 1.5 sq.mm FRLSH PVC copper wire in HMS PVC conduit min. 20mm dia. as per specification No: WG-MA/PC.
5537
-
128
Supplying & erecting mains with 2x4 sq.mm. and earth wire 2.5 sq.mm FRLSH PVC copper wire in HMS PVC conduit min. 20mm dia, as per specification No: WG-MA/PC.
1501
-
155
Supplying and erecting ISI mark modular type switch 16 / 20 A with indicator, duly erected on provided plate and box with wiring connections complete.
24
-
126
Supplying and erecting ISI mark modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.
24
-
157
Supplying and erecting ISI mark modular type computer jack RJ 45 with safety shutter, duly erected on provided plate and box with wiring connections complete.
38
-
103
Supplying and erecting ISI marked modular type telephone socket one gang with safety shutter, duly erected on provided plate and box with wiring connections complete.
25
-
84
Supplying and erecting PVC Surface modular switch box with double mounting plate for 4 modules duly erected.
24
-
158
Supplying and erecting PVC Surface modular switch box with
double mounting & front plate for 8 modules complete duly connected.
56
-
241
Supplying and erecting PVC Surface modular switch box with double mounting plate for 1 module complete duly erected.
63
-
115
Supplying and erecting PVC Surface modular switch box with double mounting plate for 12 modules duly erected.
15
-
310
Supplying and erecting ISI mark modular type blanking plate one module, duly erected on provided plate & box.
14
-
18
MISCELLANIOUS Supplying and erecting Centrifugal water pump (Monoblock), 230V, Single phase 50 cycles A.C. supply of 1.5 KW/2 HP with discharge 7.16/4.16 Litres per second (LPS) for head of 12/21 m & 50 mm suction/ 50 mm delivery pipe on provided C.C. foundation as per specification no. WP-CGP
1
-
11598
Supplying & erecting automatic control panel for 1 Ph, 230 volt, a.c.. Submersible/centrifugal pump set upto 2 HP consisting of DOL starter Of suitable relay range S.P.P., Combined ammeter/ voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase imbalance etc .
1
-
4819
Providing & erecting Hot dipped galvanized perforated type cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 300 mm width & 75 mm height complete with necessary coupler plates & hardware in approved manner.
119
-
714
Providing & erecting Hot dipped galvanized perforated type cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 150 mm width & 75 mm height complete with necessary coupler plates & hardware in approved manner.
69
-
483
EARTHING AND EARTHING CONDUCTORS Supply, Installation, Testing and commissioning of maintenance free earthing comprising of Electrode of 17.2 mm diameter Low Carbon Steel with 250 micron molecular copper bonded earthing rod of Length 3m along with 25 kg Carbon based environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity complete. Specification no. EA-MOBI
18
-
12173
Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint in an approved manner with joints required. As per specification No EA-EP.
884
-
178
Supplying and erecting copper strip of required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with bituminous paint in an approved manner with joints required. As per specification no. EA-EP.
52
-
733
NETWORKING Supplying, fixing, and configuring web smart power over ethernet switch of 24 ports on provided rack or as directed as per specification No. WG-NWC/ENS
4
-
45589
Supplying & installing UTP networking cat-6 cable suitable for LAN / WAN Computer net-working as per specification No. WG-COC/NC
721
-
42
Supplying and fixing 9U wall mount rack (Dimension-DxWxH – 450x550x500 mm) as per specification No. WG-NAS/RAK
1
-
7516
TELEPHONE SYSTEM Supplying & erecting telephone copper cable 2 pair with 0.5 mm dia. laid in provided PVC casing capping/ conduit as per specification No. WG-TW
567
-
21
Supplying & erecting jelly filled armoured telephone copper cable 50 pair with 0.5 mm dia. laid in provided trench as per specification No. WG-TW
20
-
299
Supplying, erecting & commissioning Main Distribution Frame (MDF) Box 50x50 pairs as per specification No. WG-TW
1
-
1935
Supplying, erecting & commissioning 10 pair module for connection & disconnection of telephone cable as per specification No. WG-TW
5
-
327
Supplying & erecting jelly filled armoured telephone copper cable 50 pair with 0.5 mm dia. laid in provided trench as per specification No. WG-TW
20
-
299
Supplying, erecting & commissioning Main Distribution Frame (MDF) Box 50x50 pairs as per specification No. WG-TW
1
-
1935
Supplying, erecting & commissioning 10 pair module for connection & disconnection of telephone cable as per specification No. WG-TW
5
-
327
C) HVAC VRF SYSTEMS
VRF Condensing Unit - Supply, Lifting, shifting, assembly, installation, testing and commissioning of Out Door Units suitable for VRF / VRV System - The system shall comprise of Outdoor Units with Air-cooled condenser suitable for operation at ambient temp. of 40oC, high pressure Rotary / Scroll Compressors with hermetic motor, assembled and wired in a single package complete, starting controls, safety controls, operating controls and with full feature microcomputer based controller with real time clock and programming / diagnosis facility. One / All Compressors shall be fixed / invertor type based on manufacturer's technology.The unit is to be given a complete factory operating and control sequence test under load conditions with fluid hooked up, and is to be shipped with full operating charge of refrigerant and oil. Air-cooled Condensor, refrigeration-piping controls, first charge of refrigerant etc. The Refrigerant used shall be any CFC free gas either R407C/ R410A refrigerant OR any other variant of CFC free refrigerant gas.Vendor to include MS fabrication Stands. The Outdoor units shall be complete as per technical specifications Outdoor units suitable for following capacities: I) 30 HP VRF ODU with required Multi-kit
1
-
485000
AIR HANDLING UNITS - delivering Indoor Conditions 23°C+2Deg. Celsius & 55% Indoor R.H., and providing minimum air flow as mentioned in BOQ at an external static pressure differential as indicated, and capable of operating continuously for a period of 16 hours at ambient temperature of 40oC.
Supply, installation, testing and commissioning of Sectionalised, Horizontal Double Skin Treated Fresh Air Handling Units constructed of extruded aluminum hollow sections framework, preplasticised GS Sheets of 24G (outside) / 22G (inside) with 50 mm thick injected PUF / 40 kg/One Cubic Metre + 2 % density and with thermal break, consisting of fan section having belt driven DIDW Aerofoil Backward Curved Blowers housed in a single enclosure with TEFC sq.cage motor IP55, vibration isolators. The AHU motors shall be high efficiency type IE-2. Fans shall be selected for higher total efficiency 75% and above. Motors shall be IE-3. AHUs shall be approved by VRF Manufacturer and suitable to be connected with Air-cooled VRF ODUs.Coil Section with 6 row-12 fpi DX cooling coil with Cu Tubes / Al.fin Coil headers shall be of copper as specified. Coil should be suitable for connecting with VRF ODU's. Drain tray shall be insulated sandwich type drain tray of SS (inside) / GI (outside) with liberal drain connections on either side shall be provided. The Double skin Sections shall include for Coil Section, with provision for elec. connection to the outside of AHU, Fire retardant double canvass connections, DP ports at each section, damper at AHU outlet, access doors with limit switch, maintenance lamp inside the fan section shall be included. The sections shall be provided in modular construction with enough service space and proper access doors as specified (wherever specified / required).The Prefilters shall be confirming to EU / Eurovent standards. The filters shall be with Al. Flange / Frame type with thermally bonded hydrophobic polyolefin fibers [synthetic] washable media. The filters shall be tested for filter efficiency as per EN779 – G4 / EU4 [efficiency of 90% down to 10 microns].AHU's should be suitable for outdoor duty aplication, Floor mounted suitable for outdoor application as Specified. Fan outlet velocity not to exceed 1800 fpm. Coil face velocity not to exceed 500 fpm. Installation of Double Skin Air Handling Units shall include for its installation in place, connections, testing and commissioning. Installation shall mean unloading, lifting-shifting, positioning, levelling assembly & installation in place. AHU Vendor shall be responsible for supply & assembly of floor mounted units at site. HVAC Vendor shall carry out the Unloading, lifting-shifting, connect, test and commission the AHUs in presence and with assistance from AHU vendor.Necessary foundation blocks / structural platform to be included under civil scope. Supporting arrangement for Ceiling Suspended AHU shall be in HVAC Contractors scope.
I) AHU-1 Horizontal Side/Top Discharge Floor mounted AHU / 24 TR (30 HP) / 9800 CFM / 65mm TSP / 6R-12FPI DX Cooling Coil suitable to connect with VRF Condensing units (30 HP x 1 nos) / 10 micron Pre-filters (EU4) / with return air plenum / Fan section with Backward Curve Aerofoil Fans - AHU Should be made considering Twin Motor assembly as 1# Working & 1# As stand by to avoid chance of failure... revelavly Control panel shoud updated their control respectively
1
-
394500
VRV Accessories
Supply, Lifting, shifting, assembly, installation, testing and commissioning VRF Accessories as specified below and in Technical Specifications suitable for VRF operations. I) AHU Control Kits / ODUs multi-kit / Ref Joints II) AHU Remote Controlled kit
1
-
73500.5
Supply, Lifting, shifting, assembly, installation, testing and commissioning of Connectivity kits / Distribution Kit for AHUs for hook up /connecting to respective VRF outdoor units. Expansion Valve Kit comprsing of Electronic Expansion Valve (EEV), check valve and pipe temp, sensors. Control Box comprising of PCB, communication PCB, Power transformer and termincal block and suitable for hook up with VRF remote controller, CRC etc. I) Expansion kit suitable for AHU connectivity of 30 HP cooling coil capacity
1
-
4000
PROPELLOR EXHAUST AIR FAN Supply, installation, testing and commissioning 200 mm dia propellor exhaust fan with gravity lourvers assembly. (necessary framework required for installation of fan is to be proviced by interior vendor) power cable with plug top needs to be considered as part of HVAC scope.
2
-
6966
ELECTRICAL POWER AND CONTROL SYSTEMS POWER DISTRIBUTION PANEL Supply, Installation, Testing & Commissioning of Power Distribution Panel for VRF ODU comprising of fully compartmentalised cubicle type panel, as per specifications and complete with : (Incoming Power with earthing shall be provided to each of the distribution panels by Elec.contractor) i) Tinned Al. Busbars ii)7 tank pre-treatment, Panel with IP 65 construction & suitable for outdoor duty iii) Oven baked epoxy paint finish or powder coated iv) Incoming and outgoing feeders v) Indicating and measuring instruments vi) Interconnections, interlocking, earthing etc. vii) Starters & control panel ,Panel Cost should include also OLP, SPP, On/ Off push buttons with On / Off / Trip indications, 3nos. non polarised NO-NC contacts tripping on signal from fire alarm panel & BMS.PDB 1 (For Ground Floor ) Panel with IP 65 construction.
(i) Incomer suitable for VRF system - 40 HP
(ii) Outgoing a) Suitable for 30 HP -1 nos (with ELCB) OR Suitable for 16/14 HP - 2 nos (with ELCB) b) Suitable for 7.5 hp AHU Control Panel (Shall be change as per actual rating of AHU Design) Note - Electrical contractor shall terminate power to the HVAC Panel using suitable rating of incoming Cable
1
-
111456
VFD Starter & Control Panel for AHU using PLC, temperature Based Logic Control Supply, Installation, Testing and Commissioning of Starter and control panel suitable for 415 V, 3 phase, 50 Hz power distribution system. The panel shall be with IP 65 protection and should be fabricated for wall mounting compartmentalised design as per specifications. Starter & Control Panel comprising of incomming 4 pole MCB, Voltmeter, Ammeter, Phase indicating lamps etc. Outgoing feeders as DOL / StarDelta starter for AHU / FAN motor. Vendor to provide suitable capacity 2 nos spare feeders for AHU / FAN motor. Starter and control panel shall be complete with necessary control, including OLP, SPP, ON/OFF push buttons with ON & OFF indications, 3 nos. non polarised NO-NC contacts for tripping of Motorised Dampers, Fire Dampers and AHU / FAN motor on signal from Fire Alarm Panel. Also, vendor necessary interlocking for AHU / FAN operations including toggle switch for PSU & pumping down etc to be included as part of Starter and Control panel. Panel should be suitable to house the VFD. Vendor should consider power & control cabling from Starter panel upto respective AHU / FAN. The units shall be suitable for operation on 400/440 Volts, 3 ph., 50 Hz, 4 wire A.C. supply. CHW AHU (24 TR - 9800 CFM)
1
-
79956
Outdoor type Isolators with IP 65 enclosure with ELCB for each VRF ODU
1
-
19116
Power and Control cabling - individual switch socket for AHU Control kit PCB as per requirement. For CRC incoming power shall be provided at the PDB, from there to each VRF ODU the cabling shall be carried out by HVAC contractor. Power and Control cabling with copper conductor min. 3 core x 1.5 sq.mm. Cu. Shielded control cabling shall be with PVC conduit as per specs. cable with end termination for Indoor units with Plug Top, Earthing connection, BMS connectivity etc. (from indoor to outdoor & interconnecting control cabling between ODU and CRC)
88
-
1030
Supplying, erecting & terminating XLPE armoured cable 4 core 16 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/trusses/ pole or laid in provided trench/ pipe as per specification no.CB-LT/CU
22
-
260
Cable Trays For Regrigeration Piping & ODU Power Cabling Supply and installation of GI perforated type cable trays of the following sizes fabricated out of perforated hot dip galvanised MS sheets of minimum 2 mm thick with 75 mm flange to be installed horizontally or vertically. The cable tray shall be complete including cost of bends, elbows, cross, tees, reducers etc as per drawings/ site condition and rate shall include cost of anchor fasteners, screws, nuts, bolts and misc. other fixing hardware painting of support structure etc as required. i) Structural steel such as ISMC, ISA, flats, rods etc to be used for support shall be included in this item. ii) The cable tray shall be factory built. Bidder shall include in his price, required numbers of Tees, Crosses, Bends, Elbows etc as required as per actual site conditions. Providing & erecting Hot dipped galvanized perforated type cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 300 mm width & 100 mm height complete with necessary coupler plates & hardware in approved manner.
22
-
710
REFRIGERANT AND DRAIN PIPING WORKS
Refrigerant piping Hard Copper refrigerant piping of required sizes for pair of gas (suction) & liquid, with 13 mm Closed Cell Insulation material class O / 60 kg/m3 density for wrapping the copper pipe lines. The piping system must be supported at 1.75 m distance. Rates to include special damping and supporting system including installation of factory made joints as required. Pressure Testing of VRF piping shall be as per VRF Manufacturer's requirements. Vendor to include G.I. Ready made Ladder type Cable Tray with cover for refrigerant piping, Power / Control cable for ODU and AHU.
II) Gas Line + Liquid Line (Sizing as per product Details)
48
-
2052
Drain piping in hard HDPE-U-PVC with all fittings, supports and clamps including drilling hole in wall chipping wall etc to conceal and to route the drain pipe. The piping shall be suitably insulated with 9 mm thk Closed Cell foam Class O (Nitrile Rubber) stuck with approved adhesive compound. The insulation shall be covered with glass cloth and painted with rubberised paint. I) 50mm Dia
16
-
350
Drain piping in hard HDPE-U-PVC with all fittings, supports and clamps including drilling hole in wall chipping wall etc to conceal and to route the drain pipe. The piping shall be suitably insulated with 9 mm thk Closed Cell foam Class O (Nitrile Rubber) stuck with approved adhesive compound. The insulation shall be covered with glass cloth and painted with rubberised paint. I) 40mm Dia
12
-
310
AIR DISTRIBUTION
SHEET METAL DUCTING
Rectangular Ducting in Galvanised Steel Supply, fabrication, installation and testing of GSS metal ducts as per IS-277 (120 GSM both sides, LFQ & confirming to Class VIII) for GS Sheets and IS-655 for fabrication of following thicknesses including necessary G.I. hangers/ supports, volume control duct dampers, accessories, vanes, 3 mm neoprene rubber gasket etc. complete as per specifications in accordance with the approved shop drawings. No slip joints shall be allowed. Flanges shall be Rolamate or equivalent and ducts shall be with rigid supports as per technical specifications. Ducts to be sent in Factory Fabricated and Fully Boxed Form at the jobsite. The factory fabricated ducts shall be as per approved make list only. The quoted costs should include:i) Ducts with reinforcement/ strengthening ii) Air tight joints iii) Accessories such as splitter, damper, guide vane etc. iv) Hangers and supports. v) Painting with Black color paint for duct sides behind the grills. vi) The gasket used in case for all ducts shall be fire retardant vii) Ducts shall be fully sealed with Silicon Sealant for leak tight installation. Rectangular Ducting in Galvanised Steel II) 0.63 mm (24 SWG) GSS ducting -
188
-
890
II) 0.83 mm (22 SWG) GSS ducting
144
-
936
III) 1.00 mm (20 SWG) GSS ducting
44
-
972
FLEXIBLE DUCTS
Supply, Installation, Testing and Commissioning of insulated flexible ducts. The insulated flexible duct shall have inner core made of double lamination of metalized polyster film permenantly bonded to a coated spring stel wire helix. Fibreglass insulation of minimum 14 kg.One Cubic Metre. density having a R-value 4.2oF-Ft2-hr/btu and 25 mm thk shall be wrapped over the inner core and covered with stronger outer jacket cum vapor barrier made of fibreglass reinforced metalized polyester film laminate. The insulated flexible duct should be fire retardant type.
I) Insulated Flexible ducts of 300 mm dia
66
-
710
ACCESSORIES
Supply, fabrication, assembling, installation, and testing of air distribution accessories of assorted size as specified and shown on the drawing : VOLUME CONTROL DAMPER - MANUAL Supply, Installation and adjusting of GSS Volume Control Damper within ducts complete with suitable links, levers. Blades should be double skinned aerofoil construction and opposed blades should be at 50mm pitch centres. The blades should be mounted in nylon bushes operated by an interior wheel gear system. Manual quadrant control with position indicator to be provided to enable adjust volume of air as required.
4
-
5274
Spring Return type FIRE AND SMOKE DAMPERS: Supply,Installation,Testing & Commissioning of Fire and Smoke Dampers (FSD) shall be installed in supply air duct when they pass through AHU room walls as shown in the drawings & as per specfications. The Dampers shall be motor operated with atleast 90 minutes fire rating as per UL 555S -Class II for fire and smoke management rated for 90 min.as tested by CBRI Roorkee, India. Each FSD shall be of multi leaf type,low leakage and shall be tested in the factory and will be certified by the manufacturer in form of the test certificate. The Actuator shall be direct coupled spring return type & motorised. Each FSD shall be supplied with matching sleeve (factory supply) and set of retaining angles for installation on wall / slab as indicated on drawings. The Actuator shall be in line with the Technical Specifications and shall be maintenance free direct coupled spring return type suitable to work on 24 V electric supply Dampers as per specifications mentioned above. (applied to installed with AHU Room RA Ducts & Integrate with cycle operation of AHU)
2
-
2052
Motorised ON/OFF Actuators for above FSD - The Actuator shall be in line with the Technical Specifications and shall be maintenance free direct coupled spring return type suitable to work on 24 V electric supply. The torque rating of the actuator shall exceed at least by 15% over torque required to open / close the damper. Shall have manual over ride facility.The selection of actuator size shall be the responsibility of the manufacturer. Power on indicating lamps with 230 V / 24 V transformer,damper close & open indication, reset push button, push button for manual running of actuator for periodic inspection, auxiliary contacts 24V & 230 V, contact points to receive signal from smoke detector / fire alarm panel etc. should be provided.
2
-
16056
GRILLES & DIFFUSERS - Supply, fabrication, assembling and installation of aluminium powder coated diffusers as indicated in the drawings and as per specifications. (Color to match as per architects requirements) Supply / Return Air Diffuser with VCD The 4-way square supply air terminal should be in Al powder coated construction with easily removable central core & 4-way uniform air distribution. Volume control damper to be of opposed blade, nylon geared with aerofoil blades & black matt powder coated. (Out to Out Size shall be 24"x24" with full louvers with required duct connection size (as per approved layouts) & as per approved sample.(Color to match architect's requirements.)
11
-
5274
Supply /Return / Exhaust Air L-bar Grill - In extruded aluminium construction, powder coated. One way/2 way fixed deflection with end flanges -15deg.as required and as shown in the drawings.
0.6
-
5976
Box Type Dampers: Aluminium Box type collar damper with nylon - geared control & with aerofoil blades for above grills in black matt powder coated finish. Box type dampers for S. A. collar
1
-
4392
Flexible Canvas Connection: Supply, fabrication & installation of double canvass (fire retardant) flexible connection for Inline Fans & Ductable Indoor Units as per drawings & specifications.
1
-
4043
Al. Louvers for Fresh Air / Exhaust - Supply, installation, testing & commissioning of Fresh Air /Exhaust Air Louvers - constructed in Extruded Aluminium Anodised finish. Blades inclined at 45deg. on 40mm pitch complete with: a) GI enclosure with External cowl b) Opposed Blade Volume Control Damper c) Bird wire guard in galvanised steel D) Finished with 20Microns prefilter
1
-
7020
THERMAL INSULATION Thermal Insulation of Ducts - for External Ducts - Supply, fabrication & Installation of thermal insulation on GI ducts complete with Closed Cell foam with minimum density of 60 Kg/m3 with minimum R Value 4.1/inch & thermal conductivity -0.035 w/mok confirming to Class 'O' & the inner side stuck to the outer facia of the GI ducts with recommended / Proprietory Synthetic adhesive bonding (SR998 or equivalent) & installed as per manufacturers recommendation and finished with vapour barrier with Lagging and covered with glass cloth with mechanical protection for ducting without puncturing the vapour barrier complete as per specifications. Lag coating AF5590 shall be used as vapour barrier and as protective covering on glass cloth and shall be UV protected.
I) 15 mm thick Insulation
288
-
576
Acoustic Insulation of AHU Room Walls / Partition of AHU / DSU Trap Door - Supply, fabrication and installation of Acoustic insulation on walls of AHU rooms and partition / trap door of ceiling suspended AHUs as specified and shown on the drawing complete with : 50 mm thick acoustic insulation [2 layers x 25mm thk] a) Aluminium frame work .6 m x 0.6m b) Synthetic adhesive bonding c) 48 kg/One Cubic Metre Resin bonded Fibre Glass (Glass Wool) with RP tissue / Glass clothd) 24 G Perforated Aluminium cladding
34
-
1026
Acoustic Lining of Ducts - 15 mm thick class 1 rating open cell EPDM with density of 140 kg / m³. Built-in Anti-Microbial Product Protection. Material shall be FM rated , Self adhesive type shall be preferred and erection through authorised trained person shall be insisted.-Prefered colour shall be Black. Self adhesive or Site applied adhesive to ensure VOC content 60 G/l is almost NIL or minimum due to Glue / Sealant.
88
-
882
D) Interior and Acoustical Work
Providing & Fixing proprietary Suspended Ceiling by Saint Gobain which includes GypSerra™ Perimeter Channel - is fixed along the perimeter of existing wall/ partition with the help of HILTI HPS - 1 (6x40) impact anchor, at 600mm centres. GypSerra™ Ceiling Angle is suspended at up to 2.0 m height by fixing it to the Gyproc® soffit clit with Soffit Cleat and or Gyproc® Rawl Plug- Ø8x45mm creating 1220mm x 1220mm grid. GypSerra™ Intermediate channel is fixed to the GypSerra™ Ceiling Angle with M6 x 12mm Hex Bolt & Hex Nut arrangement or with 2 Nos of Ø4.2x13 Gyproc® metal to metal screw 7049/50 Finish- Zinc Coating . The GypSerra™ Ceiling Section is then fixed to the GypSerra™ Intermediate Channel with the help of Gyproc® Connecting Clip spring steel and in direction perpendicular to the Intermediate channel at 457mm c/c. Single layer of 12.5mm tapered edge Gyproc® Plain Board is then screw fixed to ceiling section with 25mm drywall screws at 230mm centres. Finally square and tapered edges of the boards are to be jointed and finished so as to have a flush look which includes filling and finishing with Jointing Compound & Joint Paper tape. Over layer of Resin bonded rigid glass wool one side BGT of 48kg/M3 and 50mm thick placed on top of the board. Item complete Including all material, labour, transportation, lead, loading, unloading, Scaffolding, Lifting & Shifting to all levels, Cutouts for lights/ AC grills & diffusers/Speakers all accessories as per architects drawing & instructions by engineer in-charge. Contractor to submit shop drawings for architects approval. Contractor to obtain technical support from Saint Gobain Technical team & follow method of installation prescribed by Saint Gobain.
55
-
1923.07
Providing & Fixing Proprietary Suspended False Ceiling by Saint Gobain, Gyptone Quattro 41 (Bigboard) Ceiling includes 20x28x30x0.5mm Gypserra™ Perimeter Channel along the perimeter of existing wall with the help of HILTI HPS - 1 (6x40) impact anchor at 600mm centres. 25x10x0.5mm Gypserra™Ceiling Angle is suspended by fixing it to the 27x37x25x1.6mm Gyproc® Soffit Cleat and Gyproc® Rawl Plug- Ø8x45mm creating 1200mm x 1200mm grid. 15x45x15x0.9mm Gypserra™Intermediate channel is fixed to the Gypserra™Ceiling Angle with M6 x 12mm Hex Bolt & Nut arrangement or with 2 Nos of Ø4.2x13 Gyproc® metal to metal screw ,80x26x0.5mm Gypserra™Ceiling Section is then fixed to the Gypserra™Intermediate Channel the help of Gyproc® Connecting Clip 46- and in direction perpendicular to the Intermediate channel at 600mm c/c. Single layer 12.5mm Gyproc Gyptone Quattro 41 board of size 1200x2400mm having all four tapered edges, 16% perforation area of board & hole size of 12mm square shape, having 8 perforation sets per board and each set of size (487x487)mm, 56.5mm border and 113mm center band, backed with acoustic tissue, having NRC values 0.65, is then screw fixed to ceiling section with 25mm drywall screws at 230mm centres. Over layer of Resin bonded rigid glass wool one side BGT of 48kg/M3 and 50mm thick placed on top of the board. Finally all tapered edges of the boards are to be jointed and finished so as to have a flush look which includes filling and finishing with Gyproc® Pro-Fill Jointing compound, Gyproc® Joint Paper tape. Including all material, labour, transportation, lead, loading, unloading, Scaffolding, Lifting & Shifting to all levels, Cutouts for lights/ AC grills & diffusers/Speakers all accessories as per architects drawing & instructions by engineer in charge. Contractor to submit shop drawings for architects approval. Contractor to obtain technical support from Saint Gobain Technical team.
105
-
3096
Providing & Fixing Gypserra™ C-stud thick Wall lining 62.5mm(Min.) with GypSerra™ C-stud partition which includes single layer of tapered edge 12.5mm thick Gypboard® Plain of size 1219x2438mm mm screw fixed to C-stud which is placed adjacent to brick/RCC wall. 48x0.5mm GypSerra™ C-stud placed at 610mm c/c in 50x0.5mm GypSerra™ AZ150 (IS floor and ceiling channel. 50x0.5mm GypSerra™ floor and ceiling channel. Floor & Ceiling channel is anchored to the floor & True ceiling using Gyproc® Rawl plug Ø8x45mm Pull Out Load-6.8kN /Hilti Nail anchor fasteners at 600mm c/c in centerline manner. 50x32x32x0.5mm GypSerra™ Floor channel to be cut & bend & bracing at every 1200mm c/c vertically. Floor channel is fixed to brick wall with Sleeve Anchor (Ø6x40mm)/ Impact anchor or to RCC with Gyproc® Rawl Plug. A GypSerra™ Noggin channel of 48x0.5mm width has to be provided at the horizontal joints of outer boards. Single layer of Gyproc® boards to be screw fixed with Gyproc® drywall screws of 25mm at minimum spacing of 300mm at centre and 150mm at periphery. Finally square and tapered edges of the boards are to be jointed and finished so as to have a flush look which includes filling and finishing with Gyproc® Pro-Fill Jointing compound Air Dry and Gyproc® Joint Paper tape. The junction of the partition with masonry & all penetration through the partition has to be treated with Acoustic sealant. Item complete Including all material, labour, transportation, lead, loading, unloading, Scaffolding, Lifting & Shifting to all levels, Cutouts for lights/ AC grills & diffusers/Speakers all accessories as per architects drawing & instructions by engineer in-charge. Contractor to submit shop drawings for architects approval. Contractor to obtain technical support from Saint Gobain Technical team & follow method of installation prescribed by Saint Gobain.
59
-
1776
Providing & Fixing Gypserra™ C-stud Wall Lining with Gyptone Quattro 41 board includes 34x48x36x0.5mm Gypserra™ Cstud placed at 600mm c/c in 32x50x32x0.5mm Gypserra™ floor and ceiling channel. Floor & Ceiling channel is anchored to the floor & True ceiling using Gyproc® Rawl plug Ø8x45mm /Hilti X-GN20MX anchor fasteners at 600mm c/c in center line manner. 50x32x32x0.5mm Gypserra™ floor channel to be cut & bend & bracing at every 1200mm c/c vertically. Floor channel is cut-bend & fixed to brick wall with Hilti HPS-1 (Ø6x40mm) Impact anchor, 40x48x40x0.5mm Gypserra™ noggin channel to be provided at the horizontal joints of the two boards. Saint Gobain Gyproc Single layer of 12.5mm Gyptone Quattro 41 Big board of size 1200x2400mm having four tapered edges, 16% perforation area of board & hole size of 12mm square shape, center band, backed with acoustic tissue is to be screw fixed to C Stud with Gyproc® Drywall screws of 25mm at minimum spacing of 300mm at centre and 150mm at periphery. Resin bonded glass wool of 24kg/M3 and 50mm thick to be placed between C Studs Finally tapered edges of the boards are to be jointed and finished so as to have a flush look which includes filling and finishing with Gyproc® Pro-Fill Jointing Compound Air Dry (Conforms to ASTM C475), Gyproc® Joint Paper tape. The junction of the partition with masonry & all penetration through the partition has to be treated with Hilti/Pyroplex fire and acoustic sealant. Contractor to submit shop drawings for architects approval. Item complete Including all material, labour, transportation, lead, loading, unloading, Scaffolding, Lifting & Shifting to all levels, Cutouts for lights/ AC grills & diffusers/Speakers all accessories as per architects drawing & instructions by engineer in-charge. Contractor to submit shop drawings for architects approval. Contractor to obtain technical support from Saint Gobain Technical team & follow method of installation prescribed by Saint Gobain.
90
-
2304
Providing & Fixing 12 mm thick Insound Polyester boards (Formaldehyde free) of NRC .8, density of 200kg/cum, board size 1219mm x 2438mm cut to design provided by architect, fixed over existing gypsum board with synthetic glue (Fevicol SR) , inclusive of cut outs for light fittings, AC grills, speakers, switch boards etc. inclusive of all material, labour, transportation, loading, unloading, lifting, shifting, lead installed to instructions by engineer incharge.
35
-
2362
Providing and Fixing Mineral Fibre Acoustical Suspended Ceiling System with Dune (Bevelled Tegular) Edge Tiles of size 15mm Exposed Grid.The tiles should have Humidity Resistance (RH) of 99%, NRC0.5, Light Reflectance 85%, Thermal Conductivity k=0.052-0.057w/mK, Colour White, Fire Performance UK Class 0/Class1(BS476pt-6&7) in module size of 600 x 600 x 16mm, with Recycled content of 35%. The tile shall be laid on precoated G.I.channel height 32 with 15mm wideT-section flanges colour white having rotary stitching and X L2CLIPon all T sections i.e. the Main Runner, 1200mm and 600mm Cross Tees with a web height of 32mm and a load carrying capacity of 7.57 Kilograms/M2 and pull out stength of minimum 100 Kilograms.. The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system.TheTile and Grid system used together should carry a10 year warranty. approved as per GRIHA and BS 4 7 6 etc.complete.
200
-
1607.05
Providing and fixing in position Gypsum board false ceiling with 12.5 mm thick Gypsum boards, screwed/ fixed to the under structure of suspended G.I.Grid constructed and suspended from the main ceiling consisting of ceiling sections of size 25x50mm maximum center to center distance of 600 milimetre perimeter channel and intermediate channels at maximum center to center distance 1200 milimetre galvanized grid should be fixed to reinforced cement concrete slab.The gypsum board should be fixed to galvanized iron grid with necessary screws.The boards should beta ped and filled from under side to give smooth, seamless ceiling.The rate should include necessary additional ceiling sections and intermediate channels. Additional intermediate channels should be fixed to strap hangers for additional support to prevent strapping at every 1200 milimetre item to be completed in all respect including necessary sleeves for ducts finishing of joints cut outs, painting including labour, material, lifts etc. all complete.
185
-
1658.45
Providing and applying pearl/luster finish paint of approved colour and shade to the existing plaster surface including scaffolding, preparing the surface, applying the acrylic wall putti etc.complete. (including Scafolding)
315
-
203.5
Providing & Fixing in Position Carpet more than 800gsm made with 100% stain proof fibers of 5mm underlay, as per architectural & acoustic designers instructions, Complete with Material, Labour, Fixing, Glue, Lead Lift shift at all levels.
315
-
1370.25
Providing and fixing Side-Wings in pairs. of dimension 5.50m x 1.50m The wings to made on MS Frame duly covered with Blue Velvet FR grade of approved make and sample. The wings frame to be made of MS square Pipe of size 40x40x4mm duly painted. 50 MM Saal wood to be provided in side the wings.The wings to installed on the grid work above with both circular and lateral movement of the wings.
6
-
42525
Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete
2
-
63912.6
Providing and fixing 16mm dia Hilti anchor fasteners to concrete structural members like slab, beam, column, etc., with hoists, scaffolding at various heights, including Hilti RE 500 compound for fixing anchor fasteners.
14
-
333
E) FIRE SYSTEM Hydrant system
Supplying and installing G.I.pipe above ground of ‘C’ class ERW of size 150 mm dia with necessary fittings as per specification no.FF-PP
58
-
2165
Supplying and installing G.I.pipe above ground of ‘C’ class ERW of size 100 mm dia with necessary fittings as per specification no. FF-PP
23
-
1473
Supplying and installing G.I.pipe above ground of ‘C’ class ERW of size 75/80 mm dia with necessary fittings as per specification No. FF-PP
5
-
1075
Bitumen Paint & 4mm thick Wrapping for underground Piping
Providing coating of Bitumen Paint & 4mm thick Wrapping as per IS 10221 for underground 150 mm Ring Main of Fire Fighting System.
12
-
455
Providing coating of Bitumen Paint & 4mm thick Wrapping as per IS 10221 for underground 100 mm Ring Main of Fire Fighting System.
1
-
335
Supplying, installation, testing and commissioning of landing Hydrants comprising of the following in the fire duct; Supplying and installing gun metal Stainless Steel single outlet hydrant valve fitted with necessary accessories complete as per specification No. FF-VL/HV
4
-
5010
Supplying fire fighting C.P. (controlled percolation) Hose pipe, 63mm dia, 15min length, fitted with necessary accessories complete as per specification no. FF-FFA/CPH
8
-
3731
Supplying Stainless Steel branch Pipe 63 mm Ø fitted with 20 mm dia detachable hexagonal nozzle as per specifications No. FF-FFA/NZ
4
-
1728
Supplying and installing wall mounting swinging Hose reel drum fitted with 19 mm dia. 30mhigh pressure polypropylene (Polyhose) long fitted with necessary accessories complete as per specification No. FF-FFA/HV
4
-
6234
Supplying & installing gun metal gate valve of size 25mm dia as per specification No. FF-VL/GV
4
-
1115
Supplying and erecting 20/25mm dia gun metal air release cock, Each with necessary G.I. coupling to be fitted on top of air vessel or on wet riser complete as per specification no. FF-FFA/ARV
1
-
716
Supplying and installing pressure gauge of 100 mm Ø., 0-300 PSI or 0-14 kg per cm square fitted with 12/15 mm Ø. pad cock valve, and G.I. pipe, elbow etc. as per requirement in an approved manner as per specification No. FF-FFA/PG
4
-
657
Supplying and erecting M.S./CRCA cabinet for housing Floor Hydrant valve, hose pipe, hose reel and branch pipe (size 1000 mm x 736mm x 736 mm.) made from 16 SWG sheet and angle iron 25 mm. x 25 mm. x 4 mm. having front doors with viewing glass (8"x6") and locking arrangement with necessary fixing material such as rubber bidding etc. duly painted in post box red colour.
4
-
13732
Supplying and installing fire brigade Header(Siamese Connection)of 150 mm Ø for supplying water to wet riser system as per specification No. FF-FFA/SMC
1
-
9003.99
Fire Extinguishers
Supplying and erecting D.C.P. type Fire Extinguisher 9 kg capacity cartridge type with Gun Metal cap 150 gram CO2 gas cartridge, powder and brackets conforming to IS 2171-1985 and complete rested with necessary clamps made from 50x6 mm M.S. flat with nuts & bolts grouted in wall complete.
2
-
3638
Supplying and erecting ABC powder type fire extinguisher as per IS : 13849 /15683 of 6 kg capacity with necessary clamp for erection on wall.
22
-
2107
Providing and fixing Powder coated Aluminium Trap Door 1800 mm X 1200 mm (Model - IQUBX CTD024) etc complete. As directed by Engineer-in-charge
2
-
10250
Providing and applying melamine polish of required finish to the wood work by spray machine including knotting and preparing the even surface by scraping, applying French polish , scaffolding if required etc. complete.Spec No: As directed by Engineer-in charge.
45
-
631.5
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements