Pune University Tender

SITC of LINEAR RGBW surface mounted Narrow/Medium/Elliptical beam luminaire suitable for outdoor applications of Facade Lighting. Luminaires should be enabled with high power LEDs, should consists of highly efficient, UV and temperature-resistant optics with symmetric distribution. Luminaire luminous flux range 480-500 Lm, Luminaire having DMX 512 control protocol capable of producing 16.7 million colour options. The luminaire should have options for various beam angles: 25⁰/35⁰/10⁰x60⁰. Power consumption should be between 11W to 13W at steady state full intensity. Power factor of the luminaire shall be more than 0.90. Luminaire should be provided with suitable integral/separate non-integral power supply unit. The lumen maintenance L70@ 25 °C of the LED shall not be less than 70% of the initial lumen after 50,000 burning hours. Ingress Protection should be IP 66 or higher. Housing should be made of Extrusion Aluminium. Impact resistance level should be suitable to site condition of minimum IK07. Adequate heat sink with proper thermal management shall be provided. Operating Temperature : -10°C to +50°C, Operating Humidity : 10%-90%, Housing to have adjustable base bracket for angle adjustment so that the light direction can be adjusted to illuminate desired structural elements. LEDs of reputed make shall be used for the light fittings. Luminaire Shall be BIS approved.

SITC of LINEAR RGBW surface mounted Narrow/Medium/Elliptical beam luminaire suitable for outdoor applications of Facade Lighting. Luminaires should be enabled with high power LEDs, should consists of highly efficient, UV and temperature-resistant optics with symmetric distribution. Luminaire luminous flux range 1400-1550 Lm, Luminaire having DMX 512 control protocol capable of producing 16.7 million colour options. The luminaire should have options for various beam angles: 25⁰/35⁰/10⁰x60⁰. Power consumption should be between 35W to 38W at steady state full intensity. Power factor of the luminaire shall be more than 0.90. Luminaire should be provided with suitable integral/separate non-integral power supply unit. The lumen maintenance L70@ 25 °C of the LED shall not be less than 70% of the initial lumen after 50,000 burning hours. Ingress Protection should be IP 66 or higher. Housing should be made of Extrusion Aluminium. Impact resistance level should be suitable to site condition of minimum IK07. Adequate heat sink with proper thermal management shall be provided. Operating Temperature : -10°C to +50°C, Operating Humidity : 10%-90%, Housing to have adjustable base bracket for angle adjustment so that the light direction can be adjusted to illuminate desired structural elements. LEDs of reputed make shall be used for the light fittings. Luminaire Shall be BIS approved.

SITC of RGBW surface mounted Narrow/Medium beam Projector/ Floodlight luminaire suitable for outdoor applications of Facade Lighting. Luminaires should be enabled with high power LEDs, should consists of highly efficient, UV and temperature-resistant optics with symmetric distribution. With glass cover, clear/powder coated. Luminaire luminous flux range 800-820 Lm. Luminaire having DMX 512 control protocol capable of producing 16.7 million colour options. The luminaire should have options for various beam angles: 8⁰/15⁰/25⁰/35⁰/60⁰/30⁰x50⁰. Power consumption should be between 20W to 22W at steady state full intensity. Power factor of the luminaire shall be more than 0.90. Luminaire should be provided with suitable integral/separate non-integral power supply unit. The lumen maintenance L70@ 25 °C of the LED shall not be less than 70% of the initial lumen after 50,000 burning hours. Ingress Protection should be IP 66 or higher. Housing should be made of pressure Die cast Aluminium with 3-4mm thick safety glass. Impact resistance level should be suitable to site condition minimum IK07. Adequate heat sink with proper thermal management shall be provided. Operating Temperature : -10°C to +45°C, Operating Humidity : 10%-90%, Housing to have adjustable base bracket for angle adjustment so that the light direction can be adjusted to illuminate desired structural elements. LEDs of Creputed make shall be used for the light fittings. Luminaire Shall be BIS approved.

1) 3 Phase, 415V Lighting panel, out door type with canopy, free standing, double door with lockable arrangement made from polycarbonate material, 1 no. earth stud on each side face, LED indicating lamps for incomer, copper bus bars and having required switchgear as per design. 2)1.1 kV grade 3.5Cx50 to 35 sq.mm, Aluminium conductor, XLPE insulated, PVC sheathed, armoured cable as per IS 7098 (Part-1) - 1988 (to latest amendment). 3)1.1 kV grade 4Cx10 to 1.5 sq.mm, Copper conductor, XLPE insulated, PVC sheathed, armoured cable as per IS 7098 (Part-1) - 1988 (to latest amendment). 4)1.1 kV grade 3Cx1.5 sq.mm, stranded copper conductor, PVC insulated cable as per IS 694 - 1990 (to latest amendment). 5)FRR PVC flexible conduit/ Trunking of size as per design 6) Junction / termination box weatherproof, made of poly carbonate material. 7)Earthing G.I. strip / GI Wire/Earthing pit for earthing as per design. 8)excavation work( if required as per site condition releted to above scope ) 9)MS Angle/Aluminum C clamps brackets suitable for mounting the fixtures/JBs along with required hardwares.10) Including all necessary mains, cables, conduits, casing caping, trunking, connectors, junction boxes, DB's, switchgears, earthings.

S/I/T/C and training of DMX Controller System with Standalone interfaces. Controller should deliver 2*512DMX channels, the controller should have future upgradation provision up to 4 DMX universe Port. the controller should have new Nicolaudie Stand Alone engine (NSA) offering some great possibilities (multi-zone, extended triggers, 16-bit channels management...). the controller should offer multiple possibilities to trigger your lighting scenes: time/date, input ports, TCP/UDP commands. Should have Intuitive backlit keyboard with 10 presets. PC DMX IN triggers:Yes, Standalone DMX IN triggers: External triggers: 10 buttons for direct access,2 buttons to change scene,+ 1 button to change zone. 16 dry contact trigger ports via 20-Pin IDC Socket. Internal calendar: Yes, Backup of the internal clock: Yes, 3weeks without power, Memory card: Yes microSD card, 32GB max, Input power voltage: 5-5.5V DC 0.6A with power adaopter working on AC power supply,. via USB(USB power supply included), Trigger lighting scenes using calendar triggers and conditional rules with New Stand Alone engine, using contact ports, RS232 or over Ethernet. Stand Alone mode with 99 scenes across 5 zones. Buttons: iPhone/iPad/Android remote and programming apps. Temperature: 0 to +50 C°, DMX Compatibility: 8 and 16 bit DMX fixtures, System Compatibility: Windows XP, Vista, 7, 8, 8.1, 10, MAC OS X. 2)DMX Splitter cum Booster ,Input Power- 100 to 240 VAC, auto-ranging, 50/60 Hz.,Housing rugged alluminium, Operation Temperature -17ºC ~ +55ºC (0ºF ~ 131ºF) , 1 INPUT: DMX 3pin + 5pin XLR + 10A IEC-power, 2 OUTPUTS: each with DMX 3pin XLR + 10A IECpower each port should be optically isolated , Protection Rating IP20,Dimensions (cm): 13.0 x 13.2 x 5.6 cm including connection complete as required & Can be fitted with any standard truss clamp: easy installation. Make: Briteq or equivalent with 3 pin XLR connectors for incomer & outgoings, for connecting DMX cable.