Pune University Tender
Search from over 12139+ business opportunities that have been announced from the biggest Mahatenders, e tender Maharashtra, Maharashtra government tenders, and the Online Tender Notices posted on Maharashtra e tenders till date. Find opportunities that have come in from the multiple corporations, Maharashtra government departments, State PSUs, and Private companies from the state.
Pune University - UOFP Tender
Civil And Construction
Excavation
Eprocure
Opening Date28 Feb 2024
Closing Date12 Mar 2024
Tender Amount₹ 4,99,99,999
Costs
EMD
₹ 5,00,000Document Cost
₹ 10,000Tender Fee
Refer Documents
Summary
Construction Of New Girls Hostel At Savitribai Phule Pune University. (phase-i)
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_UOFP_1017727_1Bid Award Id
ViewTender No
C.A.No.2023-24/SPPU/ ESTATE/EE/ CIVIL/28Tender Authority
Pune University ViewPurchaser Address
-Website
http://www.unipune.ac.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Excavation for foundation in hard murum and boulders including removing the excavated material up to a distance 50 metres, beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5m.) By Mechanical Means
150
-
264.35
Excavation for foundation in Hard rock by chiselling, wedging, line drilling, etc. including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the building area stacking as directed, dewatering and back filling with available earth / murum watering, ramming etc. complete. (Lift upto 1.5 m).
By Mechanical Means
900
-
1371.05
Excavation for foundation in Hard-rock including trimming and leveling the bed by chiselling where necessary and removing the excavated material and stacking it in measurable heaps within a distance of 50 metres from the building area including dewatering and back filling with available earth/murum watering, ramming etc. complete. (Lift from 1.5m To 3.0 m) By Mechanical Means
200
-
1785
Filling in plinth and floors with approved excavated material in 15cm. to 20cm.
Layers including watering and compacting etc. complete.
450
-
125.9
Filling in plinth and floors with contractors material / brought from outside and approved
by Engineer in charge in layers of 15 cm to 20 cm including watering and compaction etc. complete.
1500
-
1485.85
Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm
thick including hand packing and compacting etc. complete.
192.78
-
2101.6
Providing soling using 80mm size trap metal in 15cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete.
10
-
2177.15
Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the bottom surface and sides of excavation at the rate of 5 litres of emulsion concentrate of 1.0 percent of chlorophyrifos per square meter of surface area covering 10 years guarantee on bond paper.
1000
-
112.25
Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the top surface of plinth filling at the rate of 5 litres of emulsion concentrate at 1.0 percent of clorophyrifos per One Square Metre of surface area covering ten years guarantee on bond paper.
600
-
113.3
Providing preconstructional antitermite treatment as per I.S. 6313 (Part-I) to the soil along the external face of building by punching holes of 1.2 of 1.5 C.M. diametre about 30 -60 cm deep at 15 cm c/c as close to the wall as possible and to inject 0.5 percent of aldrin or clorophyrifos at the rate of 7.5 litres per hole and sealing the same with proper filling and covering 10 years guarantee on bond paper.
250
-
160.5
Conveying materials from site of deposition.
2500
-
204.55
Providing and laying 125 micron Low Density Polyethylene (LDPE) sheet confirming to IS 3395 : 1997 below concrete pavement including all materials and labour complete.
650
-
31.45
Providing and laying Cast in situ / Ready Mix cement concrete in M-10 of trap / granite / quartzite / gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying / pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, without SCADA reversible Drum Type mixer / concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
5
-
6749.45
Providing and laying Cast in situ / Ready Mix cement concrete in M-15 of trap / granite / quartzite / gneiss metal for foundation and bedding / steps including steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), without SCADA reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)B.7 Page No 38
115
-
7260.9
Providing and laying Cast in situ / Ready Mix cement concrete M-35 of trap / granite / quartzite / gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering, formwork, cover blocks, laying / pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
765
-
8525.35
Providing and laying Cast in situ / Ready Mix cement concrete M-40 of trap / granite / quartzite/ gneiss metal for R.C.C. Columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel) without SCADA reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Parking Floor Quantity
30
-
15595.75
First Floor Quantity
28
-
15746.15
Second Floor Quantity
28
-
15896.5
Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. Beams and Lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel) without SCADA reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Parking Floor Quantity
70
-
13622.6
First Floor Quantity
40
-
13753.25
Second Floor Quantity
40
-
13883.85
Providing and laying Cast in situ / Ready Mix cement concrete M-25 of trap / granite / quartzite/ gneiss metal for R.C.C. Slabs and Landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel) without SCADA reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Parking Floor Quantity
98
-
15368.15
First Floor Quantity
98
-
15516.2
Second Floor Quantity
98
-
15664.3
Providing and laying Cast in situ/Ready Mixcement concrete M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. Chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel) without SCADA reversible Drum Type mixer / concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Parking Floor Quantity
7
-
15368.15
First Floor Quantity
7
-
15516.2
Second Floor Quantity
7
-
15664.3
Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap / granite/ quartzite/ gneiss metal for R.C.C. Pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel) without SCADA reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Parking Floor Quantity
12
-
17082.2
First Floor Quantity
6
-
17247.4
Second Floor Quantity
6
-
17412.65
Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite / gneiss metal for R.C.C. Coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including steel centering, formwork, cover blocks, laying / pumping, compacting, curing, finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel) without SCADA reversible Drum Type mixer / concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Parking Floor Quantity
5
-
8102.75
First Floor Quantity
25
-
8178.2
Second Floor Quantity
25
-
8253.6
Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. Parking Floor Quantity
55
-
94098.45
First Floor Quantity
23
-
95039.45
Second Floor Quantity
23
-
95980.4
Providing fly ash brick masonry with conventional / I.S. type fly ash bricks in C.M. 1:6 in foundation and plinth including bailing out water manually striking joints, racking out joints watering and scaffolding etc. complete.
15
-
7343.15
Providing second class Burnt Brick masonry with conventional / I.S. type bricks in cement mortar 1:6 in plinth as backing in composite masonry including bailing out water manually, striking joints, raking out joints and watering etc Complete.
10
-
8004
Providing uncoursed rubble masonry of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in foundation and plinth of inner walls / in plinth of external walls including bailing out water manually, striking joints on unexposed faces and watering etc.complete.
30
-
6163.9
Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete Parking Floor Quantity
10
-
9420.75
First Floor Quantity
10
-
9504.6
Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 mm diameter / 2 hoop iron strips 25 mm X 1.6 mm placed at every third course, properly bent and bonded at ends scaffolding, racking out joints and watering etc.
complete. Parking Floor Quantity
10
-
1295.65
First Floor Quantity
10
-
1307.4
Providing Autoclaved Aerated Concrete Block masonary of conforming to IS:2185 (Part 3) - 1984 in extra fine jointing mortar of fixoblock of UltraTech or equivalent in Half brick thick wall (150mm Thick) including striking joints, raking out joints and scaffolding etc. Complete. (The test shall be carried out conforming to IS:6441 (Part I) - 1972) Parking Floor Quantity
10
-
1076.25
First Floor Quantity
10
-
1087.05
Second Floor Quantity
10
-
1097.8
Providing Autoclaved Aerated Concrete Block masonary of conforming to IS:2185 (Part 3) - 1984 in extra fine jointing mortar of fixoblock of UltraTech or equivalent in superstructure including striking joints, raking out joints and scaffolding etc. complete. (The test shall be carried out conforming to IS:6441 (Part I) - 1972) Parking Floor Quantity
100
-
7699.65
First Floor Quantity
290
-
7776.65
Second Floor Quantity
10
-
7853.65
Providing & Fixing Soild core hot pressed , phenol formaldehyde bonded boiling proof 40mm thick marine plywood door frame Citicom 710 / Green Club 500 / CPL 710 or equivalent make on both side gypsum face, seasoned calibrated & chemically treated as per IS 710 standard one side laminate of approved colour shade & design and width i/c fixing as per manufactures specification all and Hilti fastner 100mm long 10 nos each side embedded in masonry including 75x12 mm marineply cover mould with teak wood lipping on both sides etc. complete as per direction of Engineer in Charge. Size = 300mm x 40 mm Parking Floor Quantity
68
-
1782
First Floor Quantity
95
-
1799.82
Providing and applying coal tar in two coats on new wood work including preparing the surface, scaffolding etc. complete. (coal tar shall be minimum 500 grams per 1 Sqm.) Parking Floor Quantity
5
-
110.15
First Floor Quantity
5
-
111.25
Providing and applying melamine polish of required finish to the wood work by spray machine including knotting and preparing the even surface by scraping, applying melamine polish, scaffolding if required etc. complete. Note:- The work to be executed on prior approval of Superintending Engineer / Architect will be necessary. Parking Floor Quantity
5
-
869.6
First Floor Quantity
5
-
878.3
Providing and fixing in position 32mm thick solid commercial flush door shutters, single / double shuttered, waterproof & termite proof as per Indian standard specification (Century ply make) including providing 30 X 20mm. T.W. lipping all around and both side 1mm thick laminate (Century / Greeenlam make) with three coats of fresh polish of approved color on top & vertical thickness, for bottom thickness with one coat of primer and two coats of approved satin paint (Asian / ICI make), all shutters tested for smooth easy operation etc. all as per architectural drawings & details etc. complete. (The rate is including all hardware schedule as per each type) (Flush door Basic Rate Rs.1350/- Sqm.) Actual flush door size will be paid (The rate is including all hardware schedule as per each type) HARDWARE SCHEDULE :- 1) D1 - 900 x 2100 (1.89 Sqm.) (25 Nos.) a) S.S. Butt Hinges of Supreme Suzu make (100 x 75 x 3) SS 202 4 Nos. (Basic Price = Rs. 165.20 /- Per No.) b) Handle A - 200mm long and 19mm thick SS 304 Handles of Kich Make - 1 Pair (Basic Price = Rs. 1351.10/- Per No.) c) Aldrop - 250mm long & 16mm dia.S.S. 202 Aldrop of Plus point make - 1 Nos (Basic Price = Rs. 778.80 /- Per No.) d) Round Latch - 200mm long & 12mm dia. S.S. - 1 Nos (Basic Price = Rs. 578.20 /- Per No.)
e) Tower bolt - 200mm long S.S. 202 Tower bolt Suzu Super Premium 200 x 10mm - 1 Nos (Basic Price = Rs.247.80 /- Per No.) f) Door Stopper - Suzu SS 202 Door Stopper - 1 Nos (Basic Price = Rs.118 /- Per No.)
270
-
6881
Double Shutter : 1)D1 - 1200 x 2400 ( 2.676 Sqm.) Hinges - 8 Nos. Handle A - 2 Nos. Aldrop - 1 No. Tadipatti - 1 No. Towerbolt - 3 No. Doormagnet - 2 No. PVC - Stopper - 2 No. HARDWARE SCHEDULE :- 1) D1 - 1200 x 2400 (1.89 Sqm.)
a) S.S. Butt Hinges of Supreme Suzu make (100 x75 x 3 mm) SS 202 6 Nos. (Basic Price = Rs. 165.20 /- Per No.) b) Handle A - 200mm long and 19mm thick SS Handles of Kich - 2 Pair (Basic Price = Rs. 1351.10 /- Per No.) c) Aldrop - 300mm long & 16mm dia.S.S. Aldrop of Plus point make - 1 Nos (Basic Price = Rs. 908.60 /- Per No.) d) Round Latch - 250mm long & 12mm dia. S.S. - 1 Nos (Basic Price = Rs. 601.80 /- Per No.)
e) Tower bolt - 200mm long S.S. 202 Tower bolt Suzu Super Premium 200 x 10mm - 2 Nos (Basic Price = Rs. 247.80 /- Per No.) f) Door Stopper - Suzu SS 202 Door Stopper - 2 Nos (Basic Price = Rs.118 /- Per No.)
10
-
8700.6
Providing and fixing in position Fibro Plast Door Single Shutter (The rate is including all hardware schedule as per each type) for toilets as per drawing & design etc. complete 1)D2 - 800 x 2100 ( 1.68 Sqm.) (50 Nos.) HARDWARE SCHEDULE :- 1) D1 - 900 x 2100 (1.89 Sqm.) (22 Nos.) a) S.S. Butt Hinges of Supreme Suzu make (100 x 75 x 3mm )- 4 Nos. SS-202 (Basic Price = Rs. 165.20 /- Per No.) b) Handle B - 150mm long and 19mm thick SS-304 Handles of Kich - 1 Pair (Basic Price = Rs. 885 /- Per No.) c) S.S. Round Latch - 200mm long & 12mm dia. - 2 Nos (Basic Price = Rs. 578.20 /- Per No.)
d) Doormagnet - S.S. Door magnet of Magnetic Catcher EBCO make code no. NC-US2 - 1 Nos (Basic Price = Rs. 47.20 /- Per No.)
145
-
6277
Providing and fixing in position (as per 1868 / 1982) Aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 Kilogram/One Running Metre. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 Kilogram / One Running Metre. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 Kilogram/Running metre. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram/One Running Metre. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram/Running metre. and handle and top section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. (With powder coating without box) Parking Floor Quantity
5
-
5211.45
First Floor Quantity
40
-
5263.55
Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension 63.50 x 38.10 x 1.02 mm at weight 0.547 Kilogram/One Running Metre. and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 Kilogram/One Running Metre. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 Kilogram/One Running Metre. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram/One Running Metre. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram/One Running Metre. And handle section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/One Running Metre. and top section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. (With powder coating without box) Parking Floor Quantity
7.23
-
5102.35
First Floor Quantity
10
-
5153.35
Providing and fixing in position Aluminium partly openable and partly fixed or top hung windows of any size as per detailed drawing and as directed by Engineer-in-charge with all necessary alluminium sections including necessary fixtures and fastening with 5 mm thick float glass etc. complete. b) With powder coating Note While arriving at the rate of item of item weight at 6.90 Kilogram/ One Square Metre is considered. Parking Floor Quantity
1
-
6589.8
First Floor Quantity
1
-
6655.7
Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications of RATHOD make (box mechanism) or equivalent including aluminium frames 80 x 38 x 1.22 mm, 5 mm thick sheet glass louvers of approved quality etc. complete.
As directed by Architect / Engineer in charge. Parking Floor Quantity
1
-
3741.8
First Floor Quantity
7
-
3779.2
Providing and fixing in position aluminium fixed window fully glazed of any size as per detailed drawing and as directed by Engineer-in-charge with all necessary alluminium sections including necessary fixtures and fastening such as 5 mm thick toghened tinted glass etc. complete. b) Powder Coated
35
-
5996.1
Providing and fixing mild steel grill work for windows, ventilators, etc. 15 Kilogram / One Square Metre as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete. Parking Floor Quantity
20
-
1790.65
First Floor Quantity
65
-
1808.55
Providing and Fixing matt finish stainless steel (of 302 grade) railing with top pipe of 50 mm dia. and vertical pipe of 38 mm dia at 0.60 m c/c or as required and horizontal pipes of 25 mm dia in three rows, all pipes of 2 mm thick including buffing,fabricating fixtures and fastening including pipe base of appropriate diameter and ball base of 75 mm dia above newel post of 75 mm diameter etc. complete (Prior approval of sample and brand by Ex. Engineer is necessary before use) Parking Floor Quantity
15
-
3718.7
First Floor Quantity
15
-
3755.9
Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:4 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete. Parking Floor Quantity
5
-
222.65
First Floor Quantity
41
-
224.75
Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. Parking Floor Quantity
400
-
310.75
First Floor Quantity
1200
-
313.65
Providing internal cement plaster 20mm thick in Single coats in cement mortar 1:4 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc.complete. Parking Floor Quantity
5
-
432.55
First Floor Quantity
5
-
436.55
Providing fine cement finish 1.5 mm thick over green plaster surface including scaffolding curing etc. complete. For UG Tank
20
-
107.35
Providing and applying gypsum plaster with finishing with gypsum material in 4 to 6 mm thickness to previously plastered surface / or on newly brick surface ( Excluding rough cast plaster ) in all position including preparing and Finishing the surface scaffolding etc.complete. For Ceiling Parking Floor Quantity
700
-
481.5
First Floor Quantity
700
-
486.32
Providing and applying Gypsum plaster with finishing with gypsum material in 6 to 8 mm thickness to previously plastered surface / or on newly brick surface ( Excluding rough cast plaster ) in all position including preparing and Finishing the surface scaffolding etc.complete. For Walls Parking Floor Quantity
400
-
642
First Floor Quantity
1200
-
648.42
Providing and fixing Fiber mesh, with about 300mm width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete / B.B.masonry and or tying by binding wire etc. complete. Parking Floor Quantity
20
-
59.8
First Floor Quantity
65
-
60.4
Second Floor Quantity
65
-
61
Providing and applying colour-wash of approved colour and shade in two coats to new surface including scaffolding, brushing and brooming down (excluding base coat of white- wash) etc. complete. Parking Floor Quantity
10
-
19.95
First Floor Quantity
20
-
20.15
Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) etc. complete. Parking Floor Quantity
700
-
50.35
First Floor Quantity
700
-
50.85
Providing and applying pearl / luster finish paint of approved colour and shade to the existing plaster surface including scaffolding, preparing the surface, applying the acrylic wall putti etc. & including the priming coat on concrete / masonary / Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete. Parking Floor Quantity
90
-
264.35
First Floor Quantity
45
-
267
1) Providing and applying plastic emulsion paint of approved quality, colour and shade to old and new surfaces in two coats including scaffolding, preparing the surface including the priming coat on concrete / masonary / Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required & including two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete. Parking Floor Quantity
400
-
160
First Floor Quantity
1200
-
161.6
Providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface, applying primer coat, scaffolding if necessary, and watering the surface for two days etc complete. Parking Floor Quantity
690
-
309.45
First Floor Quantity
600
-
312.55
Providing and applying two coats of synthetic enamel paint of approved colour to new /old structural steel work and wood work in buildings, including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete. Parking Floor Quantity
10
-
100.7
First Floor Quantity
10
-
101.7
Second Floor Quantity
10
-
102.7
Providing and applying two coats of flat oil paint of approved colour to the old structural steel work and iron work previously painted in building including scaffolding,if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete.
50
-
89.15
Providing and fixing 20 to 25 mm thick rough shahabad box type waterproofing for basement or underground floor on a base of Cement concrete 1:3:6, including sub base of 2.50 centimeter thick Cement mortar 1:3 with conceal, secrete (RMW), Algae proof or other alike waterproofing liquids, raking of joints upto 35 mm depth, filling the joints with 6 mm size crushed metal, hand grouting with cement slurry, curing and cleaning, with 7 years guarantee on court fee stamp of Rs. 100/- with ponding test etc complete. (excluding Cement concrete 1:3:6 base concrete )
16
-
1349
Providing & fixing 20 to 25mm thick rough shahabad box type waterproofing treatment to vertical outside faces of reinforced cement concrete wall of basement or underground floor on incl. filling gap of 25mm between rough shahabad and RCC wall with cement grout mixed with waterproofing liquid Algiproof or alike with one tile lift method, brushing the joint horizontaly joint with cement slurry mixed with waterproofing liquid for width 30 to 35mm & sloping coping over topmost tile with CM 1:3, butting the bottom most with cement concrete 1:2:4 mixed with waterproofing liquid,curing and cleaning, with 7 years guarantee on court fee stamp of rs.100/- with ponding test etc. complete. (excluding cement concrete 1:3:6 base concrete) Spec.No. : Bd.J.2 Page No.355
35
-
1403.55
Providing and applying waterproofing treatment using acrylic polymer modified cement based water proofing coating with fibre glass mesh mixing at the rate of powder to liquid (2:1) by weight covering 9 to 10 Square Metre /Kilogram with two coat using approved chemicals for masonry and concrete surface by brush covering 7 years guarantee on Stamp Papers etc. complete. (For Top Slab of RCC UG Tank)
16
-
645.15
Providing & Laying Brick Bat concrete (1:4:8) using river sand in Sunken slab portions as W.C. & Toilet slabs including mixing Placing, consolidation curing etc.
40
-
4335
Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M. 1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1Kilogramper bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300 x 300 mm making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leak proofness on Court fee stamp paper of Rs. 500/- including ponding test etc. complete. Parking Floor Quantity
112
-
1362.15
First Floor Quantity
112
-
1374.25
Providing water proof bedding for flooring of Bath and WC 25 mm thick in C.M. 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee on court fee stamp paper of Rs.500/- including ponding test etc. complete. Parking Floor Quantity
5
-
486.75
First Floor Quantity
5
-
491.25
Second Floor Quantity
5
-
495.75
Removing loose rust from the reinforcement bars by wire brushing, light hammering etc. and applying sulphate and chloride free inorganic single component rust remover Rusticide as approved by Engineer in charge conforming to IS 9077. The rusted surface shall become blackish non rusted colour. After 24 hours of application of rust remover, loose particles shall be removed by brush. Apply one more coat of Rusticide. Apply bonding coat slurry of high performance acrylic polymer - Methyl 2-methylpropenoate copolymer with another innovate as approved by Engineer in charge on entire surface. Mix 1 Kg of acrylic polymer with 0.5 Kg of cement. Finish it with ready to use repair polymer modified mortar based on special cements, formaldehyde based polymer with thixotropy modifying agents as approved by Engineer in charge (The Polymer Modified Mortar (PMM) should attain min. compressive strength of 20 N/mm2 in 1 day and 30 N/mm2 in 7 days) by adding 13 - 16% water by weight of polymer modified mortar for treatment to the damaged RCC members. Add 1 Kg of Migrating Corrosion Inhibiting Admixture as approved by Engineer in charge per 25 Kg bag of polymer modified mortar. After mixing polymer modified mortar, it can be trowel applied or sprayed. When applying by hand, polymer modified mortar must be forced tightly into the substrate to ensure complete contact with the substrate. (If scaffolding is required, same shall be provided and will be paid under relevant item) (15-30 mm thickness at a time).
5
-
1543.1
Providing and laying glazed vitrified tiles having size 1200 x 600 mm / 800 x 800 mm of 8 to10 mm thickness and confirming to IS. 15622-2006 of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. Parking Floor Quantity
170
-
1502
First Floor Quantity
460
-
1517.02
Providing and laying glazed vitrified tiles having size 1200 x 600 mm / 800 x 800 mm of 8 to 10 mm thickness and confirming to IS.15622-2006 of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete Parking Floor Quantity
15
-
2700
First Floor Quantity
40
-
2727
Providing and laying vitrified mirror / glossy finish tiles decorative type having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS.15622 - 2006 (group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. Parking Floor Quantity
5
-
1243.9
First Floor Quantity
10
-
1256.25
Providing and laying vitrified mirror / glossy finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc.
complete. Parking Floor Quantity
1
-
1324.2
First Floor Quantity
2
-
1337.35
Providing and laying ceramic tiles having size 300 x 600 mm confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white / colour cement slurry cleaning curing etc. complete. Parking Floor Quantity
20
-
1471.05
First Floor Quantity
210
-
1485.65
Providing and laying Antiskid Ceramic tiles of approved quality of size 30 cm x 30 cm and confirming to IS 15622-2006 (Group-B IIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete. Parking Floor Quantity
5
-
1268.05
First Floor Quantity
47
-
1280.6
Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame / dado / window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing, etc. complete. Parking Floor Quantity
15
-
4611.8
First Floor Quantity
76
-
4657.8
Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Ruby red / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete. Parking Floor Quantity
20
-
4233.15
First Floor Quantity
25
-
4275.35
Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with full moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete. Parking Floor Quantity
2
-
4387.3
First Floor Quantity
2
-
4431.05
Supply & Fixing of Full Body Vitrified Steptiles (Restile or equivalent make) Ready to install Treads and Risers 16 mm thick, required width and required finish in plain pattern including Cement float, filling joints, with neat cement slurry, Natural sand, curing and cleaning etc complete. with prior approval of concerned Superitending Engineer. Parking Floor Quantity
40
-
3000.5
First Floor Quantity
40
-
3030.4
Providing and preparing Kitchen otta up to 75 cm width,made up from 30 mm thick and 75 cm high vertical support for kadppa at 1 m. c/c of 25 mm thick both side polished kadappa middle shelf and bottom of 20 mm thick one side polished kadappa with facia patti of 20 x 50 mm kadappa including all material labour cutting fixing with cement mortar and araldite curing polished and cleaning etc. complete. Parking Floor Quantity
2
-
2949.8
First Floor Quantity
2
-
2979.3
Providing and fixing heavy duty inter locking concrete RUBBER MOULD GLOSSY PAVING BLOCKS of 60 millimeter thickness of having a strength of 400 Kilogram/sq.m of approved quality and shape on a bed of crushed sand of 25 to 30 millimeter thick including striking joints and cleaning etc. complete. (using 100% crushed sand)
50
-
1168.7
Providing and fixing European type wall hung white water closet of CERA CATO - 3138 make Cat No S1043118 of size - 540 x 360 x 355 mm or equivalent with push valve concealed type OR self closing half turn valve concealed type with cover plate 32mm size of including soil pipe, vent pipe upto outside face of wall, 100mm dia. GI plug bend inlet pipe all fittings, cutting and making good walls, floors etc. complete Parking Floor Quantity
1
-
15762.25
First Floor Quantity
13
-
15919.9
Providing and fixing White glazed with bottle trap earthenware Wash Hand Basin of Cera Cadal (S2040121) of 515 x 410 x 195 mm size including cold water piller taps, brackets, rubber plugs and brass chain, stop tap, chromium plate bottle trap and necessary pipe connections including UPAC waste pipe and trap upto the outside face of the wall, making good the damaged surface, testing etc. complete. Parking Floor Quantity
1
-
6790.2
First Floor Quantity
13
-
6858.1
Providing and fixing Square Type Under Counter Wash Hand Basin Cera Camry Mini (S2030106) or equivalent of 420 x 590 x 195 mm size with pillar cock, C.P.Angular stop cock, long thread of approved make continental including SS bottle trap of necessary pipe connection up to the outside face of the wall, having Telephonic Black/Colour Granite of 180 mm thick fixed on Black Kadappa Framework, etc. Complete as directed by Engineer in charge.
1
-
20869
Providing and fixing 75 mm dia stabiliser pipe / P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent,
clamps etc. complete Parking Floor Quantity
5
-
636.75
First Floor Quantity
75
-
636.75
b) 100mm dia. Parking Floor Quantity
50
-
826.6
First Floor Quantity
60
-
826.6
Providing and fixing 10 cm PVC multifloor nahani trap with grating etc. complete. Parking Floor Quantity
2
-
570.85
First Floor Quantity
26
-
570.85
Providing, laying and fixing P.V.C. pipe of 50 mm dia. with fittings such as bends, tees, reducers, clamps, etc. for spout pipe or as directed etc. complete. Parking Floor Quantity
5
-
442.7
First Floor Quantity
25
-
442.7
Providing and fixing on walls / ceiling / floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Parking Floor Quantity
10
-
279.05
First Floor Quantity
10
-
279.05
Providing and fixing on walls/ceiling/floor 20 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Parking Floor Quantity
10
-
325.2
First Floor Quantity
135
-
325.2
Providing and fixing on walls/ceiling/floor 25 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Parking Floor Quantity
2
-
393.4
First Floor Quantity
17
-
393.4
Providing and fixing on walls/ceiling/floor 32 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed
etc. complete. Parking Floor Quantity
6
-
452.1
First Floor Quantity
37
-
452.1
Providing and fixing on walls/ceiling/floor 40 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed
etc. complete.
305
-
565.4
Providing and fixing on walls/ceiling floor 50 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete.
60
-
777.3
Providing and fixing stainless steel sink of size 600 x 510 x 200 mm including coupling, outlet pipe, elbow and other necessary fitting, finishing etc. complete. Parking Floor Quantity
1
-
20875.1
First Floor Quantity
1
-
20875.4
Providing and fixing C.P. Angular stop cock with wall flange of approved make continental including necessary sockets/union nut etc. complete. Parking Floor Quantity
1
-
2818.65
First Floor Quantity
13
-
2818.65
Providing & Fixing C.P. Pillar Cock Long Neck with aerator jaquar make continental ( CAT. NO. CON 5441 N) or equivalent including necessary socket/union nut etc. complete
Spec. No.:- As directed by Engineering in charge Parking Floor Quantity
1
-
1704.65
First Floor Quantity
13
-
1704.65
Providing and fixing C.P. Wall Mixer with provision for overhead shower with 115 mm long bend pipe and wall flange of approved make including necessary sockets / union nut etc. complete. Parking Floor Quantity
1
-
4970.2
First Floor Quantity
1
-
4970.2
Providing and fixing chromium plated Shower rose of Jaquar make OHS-CHR-1989 including all accessories complete. Spec.: As directed by Engineer-in-charge. Parking Floor Quantity
1
-
1595
First Floor Quantity
1
-
1595
Providing and fixing two way C.P. BIB cock with wall flange of approved make including necessary sockets/ union nut etc. complete. Parking Floor Quantity
1
-
1530.5
First Floor Quantity
13
-
1530.5
Providing and fixing Hand Shower (Health Faucet) of Cera Make (F8030107AB) with wall flange of approved make including necessary sockets/ union nut etc. complete. Parking Floor Quantity
1
-
1633
First Floor Quantity
13
-
1633
Providing and fixing P.V.C. Rain water pipes of 110 mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, including fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and One Number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete. Parking Floor Quantity
230
-
596.9
First Floor Quantity
45
-
596.9
Providing and fixing H.D.P container one piece moulded water tank made out of low density polythyler and built corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity above 1000 to 20,000 litres
50000
-
12
Providing and fixing chromium plated towel rod of jaquar make including all accessories complete.( CON NO. 1111 ) Spec.: As directed by Engineer-in-charge. Parking Floor Quantity
1
-
313.65
First Floor Quantity
13
-
313.65
Providing and fixing chromium plated Soap dish of jaquar make ( KICH TTPHFS ) including all accessories complete. Spec.: As directed by Engineer-in-charge. Parking Floor Quantity
1
-
914.4
First Floor Quantity
1
-
914.4
Providing and fixing chromium plated Paper holder of jaquar make Kimberly Clark / Euronics EP085 AC including all accessories complete.
Spec.: As directed by Engineer-in-charge. Parking Floor Quantity
1
-
1205.15
First Floor Quantity
1
-
1205.15
Providing and fixing 450 x 550 mm size superior type Belgium mirror with 16mm dia. nickel plated towel rod etc. complete. Parking Floor Quantity
1
-
903.2
First Floor Quantity
13
-
903.2
Providing and fixing screw down 15 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete
1
-
541.3
Providing and fixing screw down for 20 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete.
13
-
671.35
Providing and fixing screw down for 25 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete
2
-
921
Providing and fixing screw down for 32 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete.
2
-
1029.05
Providing and fixing screw down for 40 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete.
13
-
1228.4
Providing and fixing screw down for 50 mm dia. wheeled stop tap of brass including necessary sockets/ union nut complete.
8
-
2090.65
Providing and fixing 40 mm dia Ball cock medium type with PVC float including sockets and necessary fittings and tested as per municipal requirements etc. complete.
14
-
1132.9
Providing and laying concrete pipes of I.S.NP. Class 2 of 150 mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in
cement mortar 1:1 and refilling the trench complete.
100
-
555.95
Providing and laying concrete pipes of I.S.NP. class 2 of 225 mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in
cement mortar 1:1 and refilling the trench complete.
15
-
588.5
Providing and laying concrete pipes of I.S.NP. class 2 of 300 mm diameter in proper line,
level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete.
5
-
780.45
Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm x 90 cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140Kilogramwith frame etc complete.
2
-
11020.65
Providing and constructing Brick Masonry Inspection Chamber 90cm x 45cm x 90 cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W.pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140Kilogramwith frame etc complete
2
-
12716.85
Providing and fixing 15 cm x 10 cm salt glazed stoneware gully trap in cement concrete 1:4:8 outside the building including cast iron grating in the sink, connecting glazed stoneware pipe, brick masonry chamber with cast iron lid and cast iron grating for the gully trap.
8
-
1843.3
Providing and constructing Ductile Iron circular manhole 45 cm dia. At top 90 cm at bottom up to 1.80 meter to 2.70 meter depth including excavation, laying 1:4:8 cement concrete bedding 15 cm thick burnt brick mansonry with 1:1 cement mortar plaster 25 mm thick inside and outside 20mm (1:3) ductile iron heavy type cover with ring 125 Kilogram in weight. High strength, more life and Durability, Good Antiskid Grip, Suitable to heavy theatric loading, Light weight casting after cost benefits for Transportation Refilling etc. as per requirement with prior approval of concerned Superitending Engineer.
1
-
13998
Providing and fixing reinforced cement concrete cover of size 60 cm x 45 cm with frame over inspection chamber etc. complete. Heavy duty (160 Kilogram)
1
-
5595.35
Rain Water Harvesting - Recharge Pit
Providing and constructing recharge pit of 2.0 m deep and 1.0 m dia of pre-cast RCC rings with 6.5" dia x 25m deep borewell at the floor of recharge pit including installation of combination of solid / perforated PVC casing pipe wrapped around with netlon mesh including 300mm thick sidefilling around outside of RCC rings (annular space) with 40mm size boulders including filling of recharge pit up to 0.5m depth with 25-75 mm clean washed gravels from bottom up followed by 0.5m depth of 10- 25mm of clean washed stones followed by 0.5m of washed river fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) including netlon mesh between each gravel / fine aggregate (natural sand / crushed sand VSI grade finely washed etc.) media layer including covering with RCC slab, manhole frame & cover, PVC rungs, PVC end- caps, fittings etc. including arrangement for inlet & outlet pipe excavation & backfilling as shown in the drawing. The rate shall be inclusive of all labour, material, wastage, scaffolding, transportation, taxes, including all leads, lifts at all levels. All material should be of approved make. All works complete as per the drawing, technical specification and direction of the Engineer in charge.
1
-
95773.7
Providing & Laying Diamond make HMS electrical PVC conduit pipes conceal in slab / beam as per electrical consultants layout incl. bends, junction Boxes, chemical joints, etc. complete a) 25mm Dia
350
-
70
b) 32mm Dia
50
-
130
Providing and fixing in position MS concealed Fan boxes with Anchor bar of 75mm. High, tying etc.
80
-
135
Providing and fixing colour coated Zincalume ( R ) AZ150 (min 150 gms / sq.mt. total on each side) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyester paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950- 1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm center- to-center. The end rib shall be designed for anti-capillary groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 Kilogram/ One Square Metre)
30
-
1230.5
Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted / welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete.
5
-
106834.35
Providing, fabricating and erecting at site of work the tubular steel structure (shed) as per standard design and specifications having various spans in between trusses and in multiples of standard length of bays as specified as per standard specifications, inclusive of cost of steel tubular trusses, tubular columns purlins, tie runners, foundation bolts, base plates, nuts and bolts, welding wherever required etc. as per detailed drawing inclusive of one coat of anticorrosive paint and two coats of oil painting of approved quality and shade etc. complete. Spec. One Number : As directed by Engineer-in-charge.
5
-
120457.7
Providing and fixing mild steel grill gate with angle iron frame 65mm x 65mm x 10mm with iron bars at 150mm C/C and diagonal flats as per the detailed drawing including hinges, pivot block locking arrangement, welding riveting and oil painting of three coats of approved shade Weight of gate 35 Kg / Sq.mt.
20
-
3346.3
Providing and erecting chain link fencing 1.6m height with G.I. chain link of size 50 x 50 mm, 8 gauge thick and fixed 75 mm above ground level on vertical M.S. Angles of 40 x 40 x 6 mm size, includind excavating pits for foundation and embedded in C.C. block of 1:4:8 mix of size 450 x 450 x 670 mm. at 1.75 M. c/c with iron bar 16mm dia as hold fast including welding link with angle frame at 30 cm c/c with nuts and bolts and horizontal M.S. Angles at top and bottom of 25 x 25 x 5 mm size and vertical M.S. flat 35 x 5 mm and 25 x 5 mm horizontal including cross support of 40 x 40 x 6 mm angles both side at every corner or bend embedded in concrete blocks of 1:4:8 of size 450 x 450 x 670 mm including 3 coats of oil painting etc. complete.
10
-
2663.4
Supplying, Drilling / Cleaning hole and injecting chemical. Application to be designed separately for Rebars as Simply Supported, Moment or Splice Connection as per EC2/TR 023 or relevant tested and accepted rebar guidelines. The chemical should have ETA approval for seismic rebar as a minimum qualifying criterion. Drilling hole with double flute type drill bits or hollow drill bits to the required depth by rotary hammer drill, cleaning with brush and jet of clean air, filling resin and hardener using serrated nozzle to eliminate mixing error with standard HDE A22 battery dispenser along with piston plug. The installation and the setting instructions should be strictly followed as per the manufacturer’s recommendations. The adequate diameter and embedment of rebars to be decided as per PROFIS Rebar Software & the report to be submitted to the project manager/ design engineer for approval. Scanning before drilling to be done to avoid hitting existing rebars. Re 500 -8mm dia 160mm depth
5
-
254.9
Re 500 -10 mm dia 200mm depth
5
-
457.35
Re 500 -12 mm dia 240mm depth
5
-
567.5
Re 500 -16 mm dia 320mm depth
5
-
829.75
Re 500 -20 mm dia 400 mm depth
5
-
1236.75
Re 500 -25mm dia 500mm depth
5
-
3445.95
Providing core cutting through beam (upto 230 mm thick) as per the instruction including scaffolding, watering, cleaning completed. a) 100 mm. Dia
5
-
675
125 mm. Dia
5
-
828
150 mm. Dia
5
-
932
Providing core cutting through slab (upto 150 mm thick) as per the instruction including scaffolding, watering, cleaning completed. a)100 mm. Dia
5
-
375
125 mm. Dia
5
-
460
150 mm. Dia
5
-
520
Providing and fixing Stainless Steel Jali 300 mm x 300 mm louvers for Electrical door as directed by Engineer-in-charge
5
-
518
J.C.B. for Site Cleaning by submitting invoice signed by Engineer-in-charge
50
-
1272
Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete
200
-
664.35
BASIC TEST OF CEMENT.Standard Consistancy Fineness, Specific Gravity, Setting Time ( Initial & Final ), Compressive Strength, Soundness
30
-
3770
BASIC TEST OF AGGREGATE. i.Water Absorption, Specific Gravity,Impact Value /Crushing Value.
30
-
2600
Sieve analysis
30
-
690
Abrasion value
30
-
1170
Flakiness index and elongation index
30
-
850
Soundness
30
-
2495
FINE AGGREGATES i.Fineness modules (Sieve Analysis), silt and clay content
30
-
1380
Chloride and sulphate content
30
-
795
Silt factor
30
-
850
BRICKS Water absorption (set of 5 bricks), Compressive strength (set of 5 bricks), Efflorescence (set of 5 bricks)
20
-
2175
HOLLOW / SOLID /AAC BLOCKS Density Test . (Set of 3 Blocks ),Compressive Strength. (Set of 3 Blocks ),Water Absorption Test ( Set of 3 Blocks )
20
-
1965
CERAMIC TILES / VITRIFIED TILES Water Absorption, Modules of Rapture (set of 6 tiles)
20
-
1595
CONCRETE i.Compressive Strength of C.C. Cube (Set of 3 cubes)
200
-
690
Concrete Mix Design (With all tests on basic materials)*
5
-
13755
Flexural strength of Beam
5
-
745
STEEL BAR TESTING i. Up to 16 mm (set of 3 bars)
30
-
1275
Above 16 mm (set of 3 bars) (Tensile Strength, % elongation, Yield stress, Weight per Meter, Bend / Rebend Test, Proof Stress)
30
-
1595
NON-DESTRUCTIVE TEST i. Rebound hammer test
20
-
265
Ultrasonic Pulse Velocity
20
-
370
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements